How to Replace Rear Drum Brakes 2006-2011 Honda Civic

  Рет қаралды 78,579

TRQ

TRQ

Күн бұрын

Buy Now!
New Brake Shoe & Drum Kit from 1AAuto.com 1aau.to/ia/1ABD...
This video will show you how to install new drum or parking brake shoes on your 2006-2011 Honda Civic. For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obiX/1A...
• Pocket Screwdriver
• 19mm Socket 1aau.to/oagc/1A...
• Needle nose pliers 1aau.to/oDa/1AX...
• Needle nose pliers 1aau.to/oDa/1AX...
• 1/2 Inch Impact Gun 1aau.to/osB/1AX...
• 3/8 Inch Impact Gun
• Torque Wrench 1aau.to/oaDr/1A...
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Drain Pan 1aau.to/ozd/1AX...
• Floor Jack 1aau.to/o4y/1AX...
• Jack Stands 1aau.to/oSU/1AX...
• Pick 1aau.to/oND/1AX...
• Wire Brush 1aau.to/osM/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 33
@TRQ
@TRQ Жыл бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@jukeboxzero1
@jukeboxzero1 6 ай бұрын
I watched several videos on replacing Civic rear drum shoes (and wheel cylinders) and this was by far the best. Thanks!!!!!
@waltmagness2690
@waltmagness2690 2 ай бұрын
Quite the thorough cleaning job. It almost looks like a brand new wheel bearing🤔
@patelyogesh1234
@patelyogesh1234 Жыл бұрын
Nice video. I changed my honda civic 2013 brake shoe same way. Tips for beginner: first remove the adjuster spring. That is not that hard. Then remove both side anchor pin and mounting clips and then lift the both shoes from bottom slots and then remove the bottom spring without any tension on it. After that just slide the both shoes upward and you can easily remove the top spring and adjuster. I followed same guide in this video for new shoes. I just used screw driver and simple plier for whole replacement process. Thanks you for great video. 😊
@mirukuchan
@mirukuchan 2 ай бұрын
Thanks, these close ups of the process are priceless! No class needed
@parihav
@parihav Ай бұрын
TRQ and 1A Auto have saved me so much time and money. I am truly grateful for the time that you guys put into making these videos and teach the regular guys like us to do tough jobs like this!
@jeffreydavidson2426
@jeffreydavidson2426 8 ай бұрын
When I bought my used 2011 Lx it had Drums, something told me get Discs on the rear Seriously a lil small voice said get Discs. I never looked back. It's so much easier with Disc brakes! Thank God!
@hollis9524
@hollis9524 18 күн бұрын
Great video! you were clear and detailed, making it easy to follow! thank you
@IllusiveMan343
@IllusiveMan343 4 ай бұрын
The horseshoe pin tested every ounce of my patience.
@toddsmith1617
@toddsmith1617 Жыл бұрын
Drum brakes! Hate is not a strong enough word.😢
@trashheap5590
@trashheap5590 Жыл бұрын
I don’t understand how you’re supposed to re adjust the adjuster lever after you’ve installed the drum. Do you just leave them fully loosened? Because if you tighten them back you can’t fit the drum back on, but if you don’t tighten them back you have no braking power. Please help
@collegehumour
@collegehumour 4 ай бұрын
How did the clean the mating surface so well, or did you replace the part?
@BigDaddyDanny
@BigDaddyDanny 2 ай бұрын
Half of my retaining spring is gone and my adjuster exploded so half of the hard work was already done for me 🤠👍
@A.R.T.1591
@A.R.T.1591 2 ай бұрын
Thank you for this video was very easy to follow. ❤ the content and god bless
@FrozenRage1989
@FrozenRage1989 3 ай бұрын
Thank you. Thank you. Thank you for this video! I found out to my amazement I had these drum brakes on my 2012 and while it took much more than 15 minutes as well as a whole lot more cuss words I got the job done. Also a thousand curses upon that top retention spring. Y'all make it look so easy and I just about decided to cut it off before it finally slipped out of it's hole and was replaced with a brand new spring.
@kevin43324332
@kevin43324332 6 ай бұрын
Excellent how to. Thanks
@matthewthorley5597
@matthewthorley5597 Жыл бұрын
Thanks for this it’s just what I needed!
@deannerayma7126
@deannerayma7126 2 ай бұрын
Great video thank you
@ahmadgondal732
@ahmadgondal732 Жыл бұрын
Great video! Very well explained.
@daypa2606
@daypa2606 Жыл бұрын
Nice video
@vlixterheavenurbano6570
@vlixterheavenurbano6570 3 ай бұрын
What did you use to spray clean the break?
@mg8718
@mg8718 8 ай бұрын
Nice work.
@SergioPerez-lv5te
@SergioPerez-lv5te 3 ай бұрын
Thank you
@coreturkoane5570
@coreturkoane5570 Жыл бұрын
on my 2014 honda civic my rear brake drum are stuck to the hub. I tried hitting it with a hammer to break it free with no lucK. i EVEN USED like solvent for rusty parts... what else can I do?
@TRQ
@TRQ Жыл бұрын
+Core Turkoane We do not have a video for this repair right now, but we'll keep this request in mind for a future video!
@franklynmaharaja9505
@franklynmaharaja9505 5 ай бұрын
Excellent
@blancal31
@blancal31 3 ай бұрын
Daaaaaamn why so many clips
@khairt1731
@khairt1731 7 ай бұрын
Brakes have no pressure. Bleeding doesnt help. Whats the issue?
@TRQ
@TRQ 7 ай бұрын
+@khairt1731 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@Fun-under-the-hood
@Fun-under-the-hood 9 ай бұрын
Use a shop vac or compressed air to spray out and clean the dust off everything. Never ever do what this guy did in the video. You do not want brake cleaner or parts cleaner getting in or around the rubber seals on the little piston in there.
@davidwang5986
@davidwang5986 3 ай бұрын
Haynes repair manual does not recommend to use air to blow
@LawfulBalcony2
@LawfulBalcony2 2 ай бұрын
What I learned is for brake drums only, use brake clean at first so dust doesn’t aerosolize because in many cases the brake dust is harmful and can contain asbestos so never use compressed air
@jamesday5527
@jamesday5527 4 ай бұрын
Couldn’t even get the drum off lol
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,5 МЛН
How to Replace Toyota Drum Brakes Like a Pro
31:33
The Car Care Nut
Рет қаралды 690 М.
Фейковый воришка 😂
00:51
КАРЕНА МАКАРЕНА
Рет қаралды 6 МЛН
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 17 МЛН
Top 5 Problems Honda Civic Sedan 8th Generation 2006-2011
10:52
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 575 М.
How to Replace Rear Drum Brakes on a Honda Civic
13:06
Backyard Chevy
Рет қаралды 298 М.
How To Replace Drum Brakes On A 2005-2011 Honda Civic
11:01
How to Automotive
Рет қаралды 231 М.
The ULTIMATE Guide on How to Replace Drum Brakes
22:00
ChrisFix
Рет қаралды 8 МЛН
Honda Civic Rear Shock Replacement 2006 (2006-2011 Similar)
21:35
Big Dog50001 Automotive
Рет қаралды 321 М.
Honda Civic 2009 AC system blows warm FIX
12:08
Dannys DIY Garage
Рет қаралды 300 М.
Brake Caliper Slider Pin Grease - How Much is Too Much ?
8:58
ScrewsNutsAndBolts
Рет қаралды 405 М.
Фейковый воришка 😂
00:51
КАРЕНА МАКАРЕНА
Рет қаралды 6 МЛН