How to Replace Rear Shock 2003-2007 Nissan Murano

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASH...
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2003-2007 Nissan Murano.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• 14mm Socket 1aau.to/oe/1AXA...
• 17mm Socket 1aau.to/oe/1AXA...
• 21mm Socket 1aau.to/oe/1AXA...
• Ratchet 1aau.to/oe/1AXA...
• Socket Extensions 1aau.to/oe/1AXA...
• Torque Wrench 1aau.to/oe/1AXA...
• Floor Jack 1aau.to/ob/1AXA...
• Jack Stands 1aau.to/oc/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@scotthanson2714]

Very informative and detailed

[@jspendleton3898]

How do you fix an upper bracket bolt that has broken off, and you're left with a broken stud?

[@Louisrph]

Is the same suspention shock and struts for the 4wd version?

[@beexcellent.idevgames]

CRUCIAL: Place a 19 mm wrench on the nut beneath the bushings and the mount and torque the nut above the mount to 55 lb ft (correct OEM torque value)!! Otherwise your alignment will be off And you will blow through tires like I just did. No joke. Very unsafe. I didn't even make it to the end of the first tire rotation. Now I need new tires!! smh