How to Replace Rear Shocks 07-14 Ford Edge

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASHA00403
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2007-14 Ford Edge.
• Check here for more videos on the 2007-14 Ford Edge: • Ford Edge 2007-2014 1s...
This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge
Tools you will need:
• Pry Bar 1aau.to/oaA/1AXAA00020
• 24mm Wrench
• 15mm Socket 1aau.to/ocY/1AXAA00015
• 21mm Socket 1aau.to/oa9/1AXAA00043
• Trim Tool Set 1aau.to/oaP/1AXXX00006
• 1/2 Inch Air Impact Gun 1aau.to/ox/1AXAA00252
• Socket Extensions 1aau.to/ocY/1AXAA00015
• Torque Wrench 1aau.to/obG/1AXAA00044
Subscribe: / @trq
Check out our playlist:
Ford Edge 2007-2014 1st Gen: • Ford Edge 2007-2014 1s...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@daxeric9193]

Instablaster.

[@jeffreymeeks4051]

TRQ I bought a pair of new OEM shocks and installed them in the exact way you showed and they are making a very loud rattling noise along with being loose despite tightening everything correctly? What is my issue? If you could write me back ASAP I'd appreciate it!

[@davycrocket4858]

I like that you explain the little things and do it all quickly, so I can sort of gather all the info at once and get a whole picture of the replacement process in my head, beforehand, as my A.D.D. brain is hard to listen to/comprehend people who talk and explain things too slowly...

[@127001er]

As with TRQ's other videos, this is to the point without the flashy music or other distracting visual effects. Thanks for the video! "Torqued"

[@sportsguy28227]

Wow! I can’t believe how easy that is to replace. Great content.

[@bigboopy8243]

Best info channel!!!

[@tdayxyz]

Thanks for the help You made the job a breeze. My 2009 edge has different size nuts on the bottom of the shock, the outside was 18mm. Also I had to take the wheel off. The bottom bolt has an L bracket attached to the head so I couldn't get a wrench on it. Thanks again.

[@JoelLopez-tp5uu]

Thanks for your help

[@modded_a.m.a]

Could you make a tutorial video about the rear coil springs?

[@Explo2222]

Looks easy, thanks!

[@davidbrizendine5973]

Is it the same process with a 2018 edge

[@colo272]

I had to do it myself🥲.. thanks bro

[@jefferycunningham9856]

Really nice video. Thanks!

[@Hubjeep]

How difficult are the springs to replace?

[@edwardx4979]

Is it possible to tighten the top nut on the shocks first then adjust and tighten the bottom nut???

[@anatoliidudko7029]

At about 120 ft/lbs my bolt broke. Check torque !

[@jonjackinsky1002]

Do you have one on the springs?

[@spicyhot1695]

👍🏻👍🏻👍🏻

[@TRQ]

+Spicy Hot Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@morjo02]

I do not have a 2 post lift. does the car tires need to be raised or jacked to replace the shocks? @trq

[@minnieacosta2670]

Suspención tracera Ford Edge 2008

[@wbtittle]

We screwed up on the torque. The bolt on our vehicle 2010 Ford Edge, was different. We failed to notice the difference. When we tried to get it to 166 ft-lbs... Well... I snapped that bolt... Our assembly was slightly different. The procedure was perfect. But for anyone else make sure your assembly looks the same. Ours wraps the cylinder. They put a smaller bolt in there...

[@wbtittle]

We were able to just pull the trim pieces off with our hand. Hindsight suggests that that was a bad idea and a great way to slice ones fingers. But I dont' do this every day.

[@alonsoherrera5225]

That ford Edge is a little Rust already

[@alexsterling2978]

It’s not easy. Not when your state salts their roads every winter and all the nuts and bolts under your vehicle gets rusted and seized up so bad that when you use a socket to loosen the bolt the head just gets chewed up. This is my current predicament.

[@TRQ]

+Alex Sterling Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@rogerbritus9378]

It looks like the thick nut on top turned along with the locking nut, which obviously changed its torque specs. Not good. Still, a very useful video. Thank you.

[@pasadenaaudio]

BIG DEAL 1 F.LB! Fool it's a great video