FORD EDGE VALVE COVER GASKET REPLACEMENT 3.5 LINCOLN MKX FORD FLEX

FORD EDGE VALVE COVER GASKET REPLACEMENT 3.5 LINCOLN MKX FORD FLEX
In this video we will show you how to replace the valve cover gasket or how to remove valve covers on Ford Edge first generation 2007-2014. It should also work on Lincoln MKX since they share the same platform. We demonstrated how to remove and replace the valve cover gasket on 2009 Ford Edge with the 3.5 engine.
This video might be helpful on:
2007 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2008 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2009 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2010 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2011 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2012 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2013 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2014 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2007 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2008 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2009 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2010 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2011 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2012 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2013 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2014 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
Products used in the video:
► Tool Set: amzn.to/2MLRsuN
► Makita Impact: amzn.to/2D8CiuS
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@rogersgrant6430]

You make it so easy for me,thank guys

[@NateOffGrid]

Thanks for the vid guys. We have a 2007 Lincoln MKX for my wife, let me tell u, if it wasn't for you guys, I would have thrown a match down the gas tank long ago! I hate this car, but it's cheaper to repair it than having another car payment.

[@lincolngriffith2805]

Thanks for this video. I had to do this myself on a 2007 Mazda CX9. The heads up on all the bolts and connections on the backside were very helpful. Wish it was as easy a job as it appeared in your video. Took me about 5 hours total with lots of cussing, cramping and almost a divorce. What a bastard of a job! Would suggest you replace Spark plugs and the ignition coils while you are in there. You will never want to do this again so best to do this while you can.

[@Codyjrt]

Nicely done. Need to to the same job soon. Are you Bulgarian? You have the same accent as my Bulgarian wife.

[@qwilliamson9117]

No need to remove throttle body if just going for valve cover gasket...

[@Thebunholio]

Why don't you guys ever show reinstalling

[@sliceoflife1821]

Do you guys know why your Bank #1 (rear) valve cover is darker than the front? Mine is exactly the same at 120,000 mi.

[@historybuff9276]

I hate working on these damn things.

[@joshuacortez7533]

Nice video, guys! I'm about to replace my valve cover gasket and I need the torque spec and pattern.

[@paulfoldes3873]

would you do a video how to remove oil pan on ford edge I have 2010 edge fwd thanks

[@alfredoowns12]

So what's the torque sequence

[@petegilbride8230]

What are the torque specs???

[@SmittySpeaks]

Yeahhhhhhhhh.... I think I will just let the shop handle this one....

[@williamperez6662]

Anyone know the valve cover torque specs?

[@billygriffin1505]

7.5 ft lbs

[@doncarlos384]

Around 8 to 10 pounds of pressure

[@miguelangelcervantescervan8724]

Excuse me, I changed the spark plugs to mine and started to pour oil there, I would like to know the reason please

[@TheBalognaPony]

Dude us too! Changed plugs and valve cover gaskets started gushing oil. Did you solve it by replacing both gaskets?

[@mateodiesel4678]

Any body have a sec to answer a question

[@williamgrissom4610]

TORQUE 89 in/lbs, or 10 NM. sorry for the spoiler, I could not find it on your youtube page or by simple googling. Also, the spark plug seal is a PAIN, without the proper $188 tool that is. I was able to hammer it in with soap water and an 1-1/4" socket (deciding the others were not in bad enough shape to bother with.) Also went ahead and replaced the PCV valve while that part was opened up

[@deantk4214]

How did you get the spark plug gasket out of the valve cover?

[@ChrisB-cx6td]

😂 not true

[@evilcorp7976]

30mm socket worked for me

[@jorgefranco1716]

How much oil pressure should you have at idle?

[@WhatEverHD]

I have a bracket holding down the rear valve cover holding up the AC line by the firewall. I can't remove it. I tried 8mm socket and it's too big. 7mm is too small. Gonna try standard long sockets.

[@WhatEverHD]

Did y'all cut the black AC line bracket on rear? My Ford Flex has it in the middle on the side. It's stuck! Help!

[@ChrisB-cx6td]

@@WhatEverHD how you manage to remove it?

[@TheMr420blunts]

I’m having the small issue as we speak

[@TheMr420blunts]

I tried standard sockets as well, I believe the 5/16th fits the best but still won’t turn it. I’m going to put a dab of a jb weld on the socket and try tomorrow. I’ll replace that bolt or if the socket works I’ll leave it there forever lol

[@Matt-pp2tx]

Your videos have saved me time and time again! Thank you!!

[@Jc-he2fi]

Thank you guys awesome video

[@TheBalognaPony]

Changed spark plugs and both valve cover gaskets started gushing oil. Anyone else experience this? 2010 ford flex 3.5

[@summerpatterson9206]

I actually just had this problem come up! Did you replace the valve cover gaskets?

[@TheBalognaPony]

@Summer Patterson i did, somehow everything blew. It was gushing oil out of the back cylinder gasket as well after i changed both valve covers. No clue wtf happened after a simple spark plug & fuel injector swap. Scrapped the car

[@letsgonow5641]

@@TheBalognaPony I replaced one fuel injector about 2 years back. Thankfully everything went ok. This car has been reliable but has transmission problems. I replaced the Trans with a used one and now that one is about to go out soon.

[@Kirovslaya]

God bless you guys

[@kee_b]

Great detail! Thanks!

[@ashleymason81]

Do not remove TB

[@GamerNxUSN]

Are those aluminum valve covers? All the ones I have seen are polymer

[@icyhotmike]

It appears Ford used whatever valve covers were laying around. My 13 Explorer Sport has these aluminum covers but most cars seem to have the black plastic covers

[@mikachicha5205]

Thanks

[@qwilliamson9117]

How long in labor time

[@konradjaworski3222]

3-4 hour book time

[@partytimexxx8931]

Really didn't need to take off the throttle body. Just disconnect the hoses and clip. Use an extention and a swivel to get to the bracket underneath. 🤷‍♂️

[@letsgonow5641]

I have a 07 MKZ same engine need to this soon. Looks like its going to be a massive headache. I dont think i can do i myself will need dads help.

[@partytimexxx8931]

@@letsgonow5641 I did one last week. It's not as difficult as you think. Just make sure you disconnect harnesses and move them out the way. I'm actually a mobile mechanic though so I've been working on cars awhile.

[@letsgonow5641]

@@partytimexxx8931 How long did it take you? My dad is in his 70s now also need a power steering hose to. Thanks hopefully it will go well. Its been leaking for a bit now.

[@partytimexxx8931]

@@letsgonow5641 it only took me a couple hours. Obviously the hardest part is the back valve cover. It ends up being neglected the most and the gasket will harden and get stuck. Find your perfect pry spot and gently lift it. Sometimes a second flat screwdriver helps. Use the first to shim it and the second to work around it until it pops loose.

[@letsgonow5641]

@@partytimexxx8931 The back one is actually the one that is leaking. We are going to try and tighten it up a bit see if that helps..

[@nigerbear2642]

These guys are as American as I am Chinese!