Рет қаралды 5,637
Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ib/1ASF...
This video shows you how to install new rear upper control arms from TRQ on your 2006-2011 Honda Civic. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• 14mm Socket 1aau.to/obs8/1A...
• 19mm Socket 1aau.to/oagg/1A...
• 32mm Socket 1aau.to/ocy/1AA...
• Adjustable Wrench
• 1/2 Inch Impact Gun 1aau.to/osD/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obzU/1A...
• Socket Extensions 1aau.to/obs8/1A...
• Torque Wrench 1aau.to/oaDu/1A...
• Gloves 1aau.to/o4t/1AX...
• Safety Glasses 1aau.to/oVF/1AX...
• Floor Jack 1aau.to/o4B/1AX...
• Hammer 1aau.to/oTC/1AX...
• Measuring Tape
• Pole Jack
• Ratchet Strap
• Vise
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.