How to Replace Rearview Camera 2009-2019 Ford Flex

Buy Now!
New Rear View Camera from 1AAuto.com 1aau.to/ib/1ARD...
This video shows you how to install a rear view camera on your 2009-2019 Ford Flex. When it comes to driving, it’s important to know what’s behind you .
This process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obhr/1A...
• Pocket Screwdriver
• 11mm Socket 1aau.to/obqn/1A...
• Trim Tool Set 1aau.to/o8V/1AX...
• Needle nose pliers 1aau.to/oCx/1AX...
• Needle nose pliers 1aau.to/oCx/1AX...
• Gloves 1aau.to/oY2/1AX...
• Safety Glasses 1aau.to/oSb/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Flex 1st Generation 2009-2019: • Ford Flex 1st Generati...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@ddreese]

This is exactly the step-by-step instruction manual I needed to replace my backup camera! Thank you!

[@gldmembr6132]

Sliding a socket over those push in connectors is way easier then needle nose pliers

[@jjcar99]

Camera just went out and ordered replacement. I would have destroyed my Flex without this video. Clear, precise and detailed.. TY so much!!

[@TRQ]

+JJ Car99 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@miked3764]

Installed my replacement backup camera with ease thanks to you! 🤘

[@mrlimas7460]

I recommend buying a large trim piece kit. The hardest part of the camera replacement is dislodging 17 pin clips. six clips are in the corners of the cover panel. Having many, many trim pieces to lift and separate that back cover panel helps to dislodge those pesky white pin clips. It is worth the extra $$, considering you are replacing the camera yourself. Right tool, Right job.

[@hyrsk1552]

Finally something that's easy to follow. Nice vid. Need to replace mine and didn't know how

[@crystalarmstrong853]

As a female thank you for this video. Your amazing doing it step by step. I love you 😍

[@fareedalshihri9533]

❤thanks you so much

[@mrlimas7460]

Can you add a link for the 17 plastic clip replacements? I am unable to gracefully pop out the 17 plastic clips. Is there a trim tool that can be used?

[@cruzmascorro9277]

I just installed a new camra and it came out upside down!! Is there a fix to this issue?

[@pokey4200]

Ford should be liable for this. I don't know of anyone with a working backup camera on any newer Ford vehicle

[@tinkerscorner54]

Great video except for one thing . . . I would recommend checking the camera operation BEFORE I put the panels back on. I've met Murphy and his Law and I'd much rather catch a problem beforehand than having to go through all that clip removal again. (Oh, how many times the Murphy's Law and Chinesium combination has bit me in the keester. They're the Dynamic Duo champions of time and money wasting.). Many Chinesium parts come pre-faulty from the factory, internal wires connected to wrong pins (upside-down or inverted video), correct part number on the wrong part, not working at all, etc. As far as the repair process, Great Job! Thanks!

[@johnlongacre1]

This is a great video. But you need to be really careful with those clips. I know they designed the cars to be built faster. But holy cow trying to get those clips out will make you want to punch your mama. LOL thank you thank you thank you for this video

[@uchennaokwuonu8848]

Thank you for this video

[@n0ypi1]

Yup it is a pain taking those push tab out specially the ones all the way in the inner corner and yup broke a few and it really felt better ha ha ha but the thing is it didnt work still upside down

[@therealleesmillard]

Has anyone successafully got those clips out using a trim piece kit and needle nose pliers? I am really having no luck and am about ready to just break them to get this panel off.

[@cruzmascorro9277]

What's the part # for the back up camera

[@erincieslik3225]

Great video !! Where do you buy that trim tool?

[@pokey4200]

My God... Whoever designed this thing with 17 clips and 4 you need a camera to see should be ashamed of themselves... A long right angle pick is what I finally them to release with if anyone is struggling...