You can find parts and tools used in this video here: TPMS sensors: amzn.to/3rl7i5e TPMS programming tool: amzn.to/3HoZy84 eBay link: ebay.us/HGAPcx (These are Amazon & eBay affiliate links)
@VideoNOLA2 жыл бұрын
Your "TPMS sensors" link doesn't go to any specific product, just a general search phrase on Amazon. My understanding is that the TS508 tool can only clone/program Autel's own "MX" series of sensors, not other aftermarket or OEM brands.
@ronaldellis38887 ай бұрын
It was not only informative. It was excellent. Maxi TPMS should give you a commission because I just bought one because of your video.
@wingflying3 ай бұрын
So did I Thanks.
@seventhson27 Жыл бұрын
I fought with "just read the instructions" manual for over 3 hours. Found this video and it went right through.
@DIYtime Жыл бұрын
😁👍🏼 You got some serious patience !
@ghostduster13 жыл бұрын
Your video is the only video I could find that gives a step by step detailed explanation. Thank you!!!
@DIYtime3 жыл бұрын
Thanks!
@TruongLe-eo8kh2 күн бұрын
Man this was great instructions. I couldnot program Ebay OE for my wife's 2011 Lexus Es 350 using the program function right above the Relearn function. I tried so many time. The tool can trigger and read the sensor but can't program it. I boight 5 OE sensor from Ebay and 4 more from Prime thinking i can program thos from Prime but no luck. I never thought the option relearn will program the sensor to the car and get rid of the idiot light on dash board. I bought my Ts508 wifi from marketplace for $100 yesterday. Many thanks. Almost brought to tire shop guy tomorrow until i saw this video by accident. 🎉
@DIYtimeКүн бұрын
Yeah, the tool language is a bit confusing, glad it worked out for you!
@boutrosalkhouri45235 ай бұрын
Hello there, I want to thank you so much for this simple way to relearn those sensors. I have the same device FS508 I tried on all my cars which they are Toyota, to relearn them before I install them. In my hand never worked. But this way you reprogram the car computer pcu, with new sensors, great idea I suffered a lot to do the other way but never worked. Because the sensor need more or less pressure, thank you again. take care man
@jimbards1234 Жыл бұрын
Thanks for simplifying! Swapped all 4 on my Exploder, bought wrong tool to save $300+, found this tool, bought, found your video, easy as 1-2-3, once you are familiar with the tool. Thank you!
@DIYtime Жыл бұрын
Awesome, glad it helped!
@bluesky62513 жыл бұрын
The best and the shortest video about tire pressure sensor programming Thank you so much
@DIYtime3 жыл бұрын
Thanks! 😁👍🏼
@TheBracket111 ай бұрын
Cant tell you how much i appreciate you just making a step by step video.. without stupid intros or weather reports or your thoughts on the invention of the wheel.. so tired of youtube douchbags doing burnouts or showoff their car builds for 10 minutes just to have zero answers for what i aerched for
@norielgalang11238 ай бұрын
The only thorough video I found in searching for 'obd tpms relearn'. Thank you very much 😊
@Jc38052 жыл бұрын
I was about to return this device, until I stumbled thus video. Thank you so much for this simple explanation!
@DIYtime2 жыл бұрын
👌🏼
@HULCHUL1 Жыл бұрын
Thanks for the video. I had full spare which luckily had sensor as well but wasn't programmed. Followed the steps in video to relearn and wow lights gone. I will go to tyre shop and ask them to change over the sensor! Shops were asking £100 for a sensor!!
@stephenkollmar51902 жыл бұрын
Thank you for this video! I need to relearn the sensors for snow tires I got for a Toyota sienna minivan and this video made it so simple. The manual for this tool is actually pretty decent, but nothing beats a step by step video tutorial. Thank you!
@DIYtime2 жыл бұрын
Glad it helped! 👍🏼
@yurikorenev74982 жыл бұрын
Hi, Can you, please, say about your success fix TPMS on your van, I have Toyota Sienna 2007 and change all 4 sensors and really don't know how to fix. I spend on my car already 1800. Thanks
@ccbarnes5a Жыл бұрын
Really good. I was able to conduct the relearning procedure exactly as shown in this video. Thanks.
@chrisfree26783 жыл бұрын
Thank you for answering my question, yes the autel ts508 can program aftermarket tpms sensors
@StilettoSniper3 жыл бұрын
Yes, but with a BIG caveat. Autel MaxiTPMS tools can only PROGRAM Autel MX aftermarket sensors, NO OTHER BRANDS. What is shown in this video is NOT a programming of the sensor but rather an OBD RE-LEARN procedure.
@davidricardo863 жыл бұрын
@@StilettoSniper Thanks for pointing out this key difference and what was being shown in this video. When he showed those $10 sensors i knew they weren't Autel MX sensors just by the shape of the sensor bodies. I've learned there is a difference between a PROGRAM and a RELEARN.
@KensDIYandHowTo Жыл бұрын
@@davidricardo86 what is the difference?
@anthonyzarraga29938 ай бұрын
Thanks, i was looking info about if it can be any universal sensor programed and you answer it in this video. I'll get the tool and son universal sensors.
@someguy50352 жыл бұрын
"It's easy. Just buy this expensive tool that you will likely only use twice in your entire life." Thanks man. You really did something here....
@DIYtime2 жыл бұрын
When did you hear me say easy or inexpensive?
@DIYtime2 жыл бұрын
Considering you will be charged $100+ each time you do this at tire shop, the tool pays for itself in just two visits.
@DIYtime2 жыл бұрын
Most households have 2-4 cars, with 4-5 sensors in each car. Then there are also two sets of parents, friends, neighbors & relatives with cars. Sensor batteries die about every 5 years. Then there are winter/summer tire sets in some areas of the country... Unless you are lonely antisocial 90-years old living in Florida, its gonna be probably used at least twice a year.
@javiercruz36092 жыл бұрын
I have 4 cars on my house so $125 for this tool is a good deal
@jorgenunez83928 ай бұрын
Nice step by step guide! I wonder if the way you finished the process when you get "OBD relearn successful" message, turning ignition off, and on again, before unlock the cable from the car ODB socket, and them start the car, was in the MaxiTPMS manual. For me is important to be careful, you are writing the ECU and can damage it. Thank you!
@Dale-k8x13 күн бұрын
BWARE TS508WF Autel has removed the ability to manually enter ID number on MX sensors
@CarlosEchevarria-w2h Жыл бұрын
Great video..
@FixStuffDaily Жыл бұрын
Perfect tutorial thanks
@olakunleadewaleadegbile5301 Жыл бұрын
Nice. I'll try it. I was looking for a way to have my car relearn bcuz I just replaced with a good sensor. Not sure if mine came with obd connection tool, but I'm sure I'll figure it out.
@lavazakoffee7373 Жыл бұрын
TS601 is not reading IDs from the car by OBD II if you have broken sensor. On BMW G30 2019
@hopemmaugwu76508 ай бұрын
Does this sensor come off after a bumpy ride
@kanishixansarawanan98083 ай бұрын
Can you reprogram them before install on tyre or you have to do after installation inside tyre
@DIYtime3 ай бұрын
Yes, I actually prefer to program sensors beforehand, to make sure they are working, compatible & have good batteries.
@TERRORoftheLORD Жыл бұрын
What brand of sensors did you use?
@BJMiguel3 Жыл бұрын
So this tpms tool can register new tpms for Toyota too correct? Your doing a video on a Nissan but I assume it’s the same with a Toyota? Just need the ID numbers on the sensors itself?
@DIYtime Жыл бұрын
Yes, It supports most car brands.
@sudharsananm.k3206 Жыл бұрын
This same process possible for all vehicle? toyota vehicles?
@ladywizard4299 Жыл бұрын
also does the brand of the new sensor matter? As I was told you can only use Autel sensors with their tool.
@dannyshi71362 жыл бұрын
I have a prius also having a flashing tpms light then turned solid after. I would like to replace two of my tpms sensors and would like to know the part and model of the tpms sensors that you used in the video. I just want get the same parts and to follow your video to get them relearn without getting into problem later. The oem one my prius 2012 has is Pacific brand. Thanks
@adalbertoalcocer2934 Жыл бұрын
Is this the same process for every vehicle?
@Bubbz2024 Жыл бұрын
Have you ever used their TS501 for comparison? I wonder if it will work for OEM sensors
@نجمالشمال-ش3ث2 жыл бұрын
Good video. If you have 5 tires with tpms who the device will detect.i saw only 4 tires.can you show us please for 5 tiers
@jayr98102 жыл бұрын
If your car has a full size spare and also has sensor the device will display the spare during the diagnosis step and also during the programming
@leletipiham81563 жыл бұрын
Did you reprogram the codes to the new tpms or they learn the new codes automatically
@DIYtime3 жыл бұрын
Sensors come already programmed with ID’s from the factory. Car ECU needs to be programmed to accept communication from new sensors.
@richpitt87311 ай бұрын
How are you going to let the air out of the tire one at a time to see which one puts the light on, if the light is already on?
@DIYtimeTech11 ай бұрын
Blinking light indicates dead sensor. Solid light lets you know that tire pressure is low. Solid light would be triggered by a good working sensor and it should take precedence over blinking light. You basically deflate one tire at s time and see which tire would cause blinking light to turn solid. May not work the same on all car brands, but thats what it was doing on my car.
@d5dd2 жыл бұрын
Is it possible to purchase new sensors and reprogram them without the original sensors.----I took my car to pepboys and they replaced all the tpms sensors. Now none of them work? I still get the tire pressure light. I spent 6 hours waiting for them to replace the tpms sensors, so I don't want to go back to them. Can i just replace the sensors myself without the old sensors?
@DIYtime2 жыл бұрын
That doesn’t sound right. Programming should be a part of replacement process. Otherwise why even bother replacing them. I would go after that shop to get the job done right. And yes, you don’t need to have original sensors in order to program the new ones.
@TheSammajor2 жыл бұрын
Hi Nice and easy video tutorial One question Is it really that Autel tpms tool only works with Autel sensors for relearning process?
@DIYtime2 жыл бұрын
No, I used Denso sensors for my Toyota and this tool programmed it without problems.
@f2lo26 ай бұрын
4:16 what will happen if I select [Y]=Erase DTCs? Will it delete all sensors data from car computer and it will stay without any tmps sensors?
@DIYtime6 ай бұрын
No, it will only delete error codes sand turn off low tire pressure dash light.
@CY-qm6ek Жыл бұрын
Hi, do you know how to activate TPMS on Mazda infotainment?
@ABVDrinker2 жыл бұрын
I'm getting an obd relearn failure. The truck I'm reprogramming has good sensors but they are from an other truck. Any idea why I'm getting id failure?
@maxb5947 Жыл бұрын
I have a 2015 cadillac ATS and one of the sensors died on me.. So after buying a new one and installing it, my TPMS sensor isn't able to read it! Not only that, but on my dashboard all the pressure for all 4 tires is completely gone!! What should I do bro
@DIYtime Жыл бұрын
New sensors need to be triggered or activated first. I have a video somewhere showing how its done. It is not shown in this video cuz I’ve had similar situation and only later learned about activating.
@cesarbeg5 ай бұрын
Good. The tool works with Autel sensors only?
@DIYtime5 ай бұрын
No, it will read all sensor brands and record them to ECU. Autel sensors are universal and you can use them with many cars or for cloning your old sensors.
@cesarbeg5 ай бұрын
@@DIYtime thanks. And if i use for example geartronics sensors can i instal them?
@DIYtime5 ай бұрын
What car is this for?
@cesarbeg5 ай бұрын
@@DIYtime Jeep commander
@rexal34632 жыл бұрын
does it make my tpms sensors go off at a lower pressure is that something i can change with the tool?
@stevepham8543 жыл бұрын
I have Camry 2007 with dead battery like you. Should i go dealer get the TPMS and using this machine to reprogram them. Thanks friend
@StilettoSniper3 жыл бұрын
Buy your OE sensors online, not from a stealership. You will save a shit ton of money.
@ladywizard4299 Жыл бұрын
what if I only want to replace one sensor?
@veasnayong3456 Жыл бұрын
Can I rent the tool?
@sergiysolovyov50893 жыл бұрын
Good job 👏
@DIYtime3 жыл бұрын
Старауся!
@Pccpy4 ай бұрын
Don't you have to program the new sensor first?
@TruongLe-eo8kh2 күн бұрын
I tried program new sensor but autel cannot program my sensor which was for 2011 lexus es 350. Tool can trigger the sensor which tell the kilo pascal and temp and other stuffs but it can't program somewhere so I went this route like this video and worked great
@cardplayer76 Жыл бұрын
Did you use Autel MX sensors or can you us ones from any manufacturer? The Autel Maxi TPMS tool company implies that you need to use their brand of sensors.
@DIYtime Жыл бұрын
You can do either one. I used OEM Denso sensors.
@efrenabueva63902 жыл бұрын
Where to buy for Nissan terra?
@Lifesrad8 Жыл бұрын
How do you take the 4 off the vehicle and add 4 new. I bought it to switch my summer to winter tires and you have to delete the summer tire sensors because they are mounted in different wheels and add the winter tire sensors. Or does it automatically just take those 4 off and put them on it that you scan.
@DIYtime Жыл бұрын
Yes, it automatically replaces old values.
@Lifesrad8 Жыл бұрын
@@DIYtime awesome thank you for the response.
@VideoNOLA2 жыл бұрын
4:00 You say "Turn on the ignition" but video shows you tapping Start button twice to "Acc ► ON" mode (without starting vehicle). Which is correct?
@DIYtime2 жыл бұрын
On push start cars “ON” means ignition is on. If you have a key ignition, turn key to ON.
@danielbeaty2 жыл бұрын
I drive a 2011 Toyota Prius. The TPMS light is not on at all but I wanted to check battery life on my sensors. I bought another TMPS tool from Amazon (by Launch) that will not read the sensors on my Prius. I know the tool works because it read all 4 sensors from my 2009 Sonata. The instructions say some sensors have to be "woke up" with a magnet or by deflating the tire? Does the Prius require that? Any thoughts would be appreciated.
@DIYtime2 жыл бұрын
I’ve done sensors on my Lexus IS and Toyota Tacoma, and they didn’t require waking up. Plus, if your car doesn’t have TPMS light - your sensors are definitely awake. 😁 My Autel tool gives me battery status on both cars without issues. Also, maybe make sure you choose correct car make/model in the menu. Contact seller if still no go.
@DIYtime2 жыл бұрын
*I did some research, someone said he did have to wake up sensor for Prius by deflating it during registration or triggering procedure.
@robinjohnson97322 жыл бұрын
Do you find the MaxiTPS tool can program tpms sensors that are not of the Autel MX brand?
@CesarGarcia-lf9oo2 жыл бұрын
I’m wondering the same thing
@KensDIYandHowTo Жыл бұрын
When you buy cheap sensors online I think they come preprogrammed for year make model of your car but could be wrong? When you use "relearn function on tpms" does it not program a unprogrammed sensor to your vehicle?
@robinjohnson9732 Жыл бұрын
@@KensDIYandHowTo I bought a spare set of Rims and tires with TPM Sensors already mounted. The guy said they came of his dodge ram but they would not communicate with my dodge truck computer. My Maxit508 could not detect or read the sensors on this set. Maybe the sensors were already dead. Anyhow, I did order a new set of programmable TMPS sensors, I will swap them out in the spring.
@williambell002 жыл бұрын
I thought the sensors had to be programed before installing them in the tires, in your video you installed them aired the tires up then programed them is this correct?
@DIYtime2 жыл бұрын
Either way is fine. I would even say it’s better to program them before installing. Once I purchased a new sensor, installed it first, and then realized it was defective when trying to program it. Had to do it all over again 😬.
@Jc38052 жыл бұрын
Mine was installed first, before I had this device. After acquiring, just do relearn and write the sensor ID to ecu by hooking onto OBD.
@infernauta863911 ай бұрын
I hope my tyre dealer can do it 😅 too hasty people there....
@stevofromiowa Жыл бұрын
I'm currently working on a 2008 Versa. When I select "relearn," all it gives me is the instructions which say lower tire pressure below 10 psi, etc., and won't cue to scan from that part of the menu. Went to the Autel site and watched a video that shows the same thing. Did you get something out of order during editing?
@TruongLe-eo8kh2 күн бұрын
My 2011 es 350. I didn't have to lower pressure . I kept it at 40 psi. I drove it a few miles after installing it without program it. It still did a relearn and got rid of the low pressure light
@robpeters52042 жыл бұрын
How do you turn the ignition on without starting the car. Do you put your foot on the brake to start it or not use your foot?
@splittersonic2 жыл бұрын
Just hit the on button with no foot on the brake.
@nrgonline2 жыл бұрын
Don’t step on brake and press on button twice. It goes into ON. One press is ACC. Just like when cars has keys. First turn, acc. 2nd turn On and
@adriandelgado95492 жыл бұрын
So with the maxitpms you can program the new sensor ID to ECU?
@DIYtime2 жыл бұрын
Yes, *but you have to use the universal sensors of the same brand.
@arubi743 жыл бұрын
Does this work as well with a 2009 Lexus IS as if your using tech stream?
@DIYtime3 жыл бұрын
Yes.
@gerardobarroso34823 жыл бұрын
did u used maxitpms sensors?? or can u use any brand and program with this tool. According to their web it says you have to use their sensors
@DIYtime2 жыл бұрын
I used their sensors.
@lordbeerus61822 жыл бұрын
I installed all 4 tpms sensors I bought on Amazon. But I didn't program them before installing them. Did I mess up
@DIYtime2 жыл бұрын
They still can be programmed after installation if you have TPMS tool. It can scan and display sensor ID’s.
@Mahigeer12 жыл бұрын
Using an impact tool in this case is baaaaaaaaad idea.
@farhadali24492 жыл бұрын
Will this programming tool work on 2011 528i?
@DIYtime2 жыл бұрын
Yes, their website says it is compatible with your car.
@CloudsrisesZ3 жыл бұрын
You should make a misfire video I’m having a problem with my truck
@DIYtime3 жыл бұрын
I have a couple videos about misfire on my channel here...
@yemisharks3 жыл бұрын
@@DIYtime qqq
@nordicpride97082 жыл бұрын
Just a heads up. This tool won’t program sensors that aren’t MX type from Autel.
@DIYtime2 жыл бұрын
I programmed Denso sensors without issues multiple times. Just make sure to do “wake up” procedure. They often come dormant from the factory to save battery.
@nordicpride97082 жыл бұрын
@@DIYtime Good to know. Autel advertised this can only program MX and I’ve seen countless customers have issues. I personally use a pro grade unit but it’s good to know with Toyota this seems to work. I don’t like aftermarket TPMS sensors. They will drive you to drink 🍺
@DIYtime2 жыл бұрын
It does other brands. Its just a bit confusing to figure out. I actually did a full review video on this tool where I go into details about it.
Hi excellent video. I have a question I bought 4 sensor tpms 315 Mhz in Ebay but no brand MX. Can I program the sensors even if it's from another brand.? Thank you.
@Jordant106_2 жыл бұрын
I’m trying to relearn the positions after programming some sensors and it’s not letting me it just keeps saying Duplicate ID and it’s not letting me re learn them
@DIYtime2 жыл бұрын
Possibly one of your new sensors is dead and the tool catching signal from the same sensor twice. After all these are communicating wirelessly with ECU and signal can be detected from the distance. Thats what happened to me once. I bought “new” sensor that had dead battery. This can happen if seller has them sitting on the shelf for too long.
@Sally-nd5pc3 жыл бұрын
Hello,how can i contact you?
@DIYtime3 жыл бұрын
You can ask me here.
@Sally-nd5pc3 жыл бұрын
@@DIYtimeOk,do you start to review products on KZbin,I have code reader need do a review video,are you interested?
@DIYtime3 жыл бұрын
No, at the moment I am not doing product reviews.
@arminius3012 жыл бұрын
the TS508 costs $278. Who in their right mind is going to drop that much on a single use tool? There are much more economical solutions out there. Without providing info on a cheap tool that'll accomplish the tpms reprogramming this video doesn't serve much of any good purpose. You'd get much more views if you provided an economical solution.
@DIYtime2 жыл бұрын
With all that new technology in modern cars, I don’t think there is much other options we have these days, aside from paying someone else to do it. If you are aware of any, let me know, I’ll be happy to try and make a video to share with everyone.
@bywayz2 жыл бұрын
I purchased a new Autel TS508 on eBay for $120 + sales tax, shipped, after a frustrating experience at a local tire chain. My first use was to check pressure, and it quickly detected a dead/defective new sensor in one wheel. The shop verified my finding and replaced the sensor at no charge. However, I've learned that on at least fourth gen Toyota 4Runners, the position and ID relearn process screws up the vehicle-stability system (instrument panel VSC Trac lights stay on). Fixing that requires a zero-point calibration process to be performed. Easy to do, but since the mechs at the shop had never heard of that, I found the process online and did it myself.
@DIYtime2 жыл бұрын
Nice! If you have summer/winter sets of tires, the tool will pay for itself very quickly!
@arminius3012 жыл бұрын
@@bywayz Thanks for passing on your experience. I might see if I can find the TS508 for a low price.
@nrgonline2 жыл бұрын
Cheapest solution is free from American tires co. For a DIY like me, I bought this tool and this video was helpful. Money means nothing if it solves stress with multiple cars and no visits to tire shops that takes hours to deal with. Time is money. Best I got the tool for was $200 on eBay.