I was almost ready to drag all the parts off into the trash but your video showed me how to get everything back together. My watch is working great again and I only had 1 screw left!! Thanks
@ZeeEverything4 жыл бұрын
Happy to hear that .
@neilhgv2 жыл бұрын
Just replaced the battery on my watch and followed your instructions, I must say what a brilliant tutorial. Thank you so much.
@ZeeEverything2 жыл бұрын
You welcome.
@gregtaylor83103 жыл бұрын
I just successfully completed the battery replacement today. Thank you for your valuable info.
@ZeeEverything3 жыл бұрын
Glad it helped thank you for your comment.
@davemitchell4692 жыл бұрын
Hi ZE, just got my replacement kit from Amazon today. It took 3 weeks to arrive. During the 3 weeks wait, I watched your video over and over several times. I successfully changed out the battery and it is currently charging at 98%. I will be monitoring the battery performance over the next few days. Thanks a lot for a very well put together video on this battery replacement. P.S. I almost stripped one of the screws on the back cover but immediately stopped and reassessed the removal. I did encounter an already stripped Phillips Head screw on the inside. Made me wonder about QA and QC during assembly. Thanks again. Take care and stay safe !
@ZeeEverything2 жыл бұрын
Glad the video helped you, thanks for your kind comment.
@tn36563 жыл бұрын
Brilliant vid. Just replaced mine with a battery and tool kit from Amazon. This vid was really easy to follow along. Most appreciated.
@ZeeEverything3 жыл бұрын
Glad it helped you,thanks for comment.
@katiably3 жыл бұрын
Thank you so much for this clear instruction. Just changed the battery watching your step-by-step guide.
@ZeeEverything3 жыл бұрын
You're welcome! Thanks for your comment.
@xantony25804 жыл бұрын
Finally a video that explains well each step. Thanks, tomorrow i'll try to replace my battery. You are a little to slow but its ok, you had to do it slowly and carefully, cause its easy to break something in the process. Well done
@MrZaydoon13004 жыл бұрын
Yes, it's helpful Video.
@ZeeEverything4 жыл бұрын
Thank you, I'm happy that it helped.
@rgruenhaus3 жыл бұрын
Slow and steady and accurate gets the job done right!
@Bigemax232 жыл бұрын
Thank you very much...after your seeing your video, i followed every step and it worked out perfect...my old battery was warped and so far its working great...thanks again
@ZeeEverything2 жыл бұрын
Thanks for your comment, I'm glad the video helped you.
@InfamoussDBZ3 жыл бұрын
Thank god for this video. Once I'd taken it apart to replace the battery I realized I had no idea how to put it back together!
@ZeeEverything3 жыл бұрын
Glad the video helped you
@rgruenhaus3 жыл бұрын
No god we trust!
@yashp3 жыл бұрын
3:10 I used a heat gun to make it easier on me as i hate scratching the watch awesome work boss
@ZeeEverything3 жыл бұрын
Thanks for your kind comment. Yes, you are right. Using a hot air gun helps a lot, and I use it usually, but not everyone has a hot air gun so I liked to use the tools that is available to everyone.
@slyronnettecorley60164 жыл бұрын
Thank you for providing a simple illustration of how to remove and replace the battery. Amazing video! Watching this video made it simple to replace my battery and now its like new
@ZeeEverything4 жыл бұрын
Glad it helped you, thank you for comment.
@WildBeret3 жыл бұрын
hi , where have you bought your battery?
@slyronnettecorley60163 жыл бұрын
@@WildBeretEbay
@WildBeret3 жыл бұрын
@@slyronnettecorley6016 iti s hard to find good battery , aliexpress got lots of them :(
Thank you! Very easy instructions to follow. Just replaced my battery - old battery was warped on one side. Fingers crossed it all works well.
@ZeeEverything3 жыл бұрын
You welcome Thanks for your comment.
@bruin19893 жыл бұрын
Just replaced mine following your video. Thanks for the very clear demonstration!
@ZeeEverything3 жыл бұрын
Glad it helped! Thanks for your kind comment.
@rgruenhaus3 жыл бұрын
An SD TYPE card slot to change the battery would be outstanding! Just use an extraction pin to pop out the old like an SD or SIM card!
@colinrippey3608 Жыл бұрын
Looks good. I would not have been brave enough to do it without the watch being powered down before taking the back off.
@b-ville5043 жыл бұрын
Thank you Sir. I just replaced my battery and my watch works great now.
@ZeeEverything3 жыл бұрын
You're welcome! thank you for your comment.
@KendallAdams4 жыл бұрын
Great video and well broken down into easy steps! Watch works great again!!
@ZeeEverything4 жыл бұрын
I hope you have benefited from the video, thank you
@richardthomas6783 жыл бұрын
Thank you for the clear instructions. You have saved me so much money!
@ZeeEverything3 жыл бұрын
You're welcome Thanks for your comment.
@demetrioruizgomar65413 жыл бұрын
Thank you so much! Finally an easy to follow guide. Keep the great work!! Greetings From México 🇲🇽!!
@ZeeEverything3 жыл бұрын
You welcome, glad it helped.
@rgruenhaus3 жыл бұрын
Wow and you actually speak American!
@rgruenhaus3 жыл бұрын
I was looking for how to replace the app function on the watch face from steps to battery % and found your video! Nice helpful video, but not what I wanted! Hope I never need to replace the battery. The watch would no longer be IP68 after battery replacement unless the seal material was replace also!
@ZeeEverything3 жыл бұрын
Sorry for the late reply, if you damaged the seal when opening the back cover, you must replace it. Thanks for your comment.
@daniellazarre8704 жыл бұрын
THANK YOU ☺️ SAVED ME A LOT $$$ VERY DETAILED VIDEO 👍🏾
@ZeeEverything4 жыл бұрын
You welcome, Happy to hear that.
@moryalex3 жыл бұрын
big thanks for your very detailed steps, it's the best video for this topic till now, really appreciate it actually.
@ZeeEverything3 жыл бұрын
Happy to help Thanks for your comment.
@gebarr4742 жыл бұрын
Excelent tutorial, can i make you a question? Please tell me the symptoms to change the battery, my smartwatch restarts and the activation gesture stopped working
@ZeeEverything2 жыл бұрын
One of the most important symptoms of battery damage is the loss of charging too quickly or not keeping the charge. As for restarting, there are possibilities, either a software problem, or hardware, such as the watch being hit by a strong blow or water leaking inside it.
@nathanaelnagan20143 жыл бұрын
Thank you very much for the tutorial. Your slow pace made it easy to follow. you saved me a ton of money and I got to learn something new.
@ZeeEverything3 жыл бұрын
Glad to help you, thanks for your kind comment.
@moodberry2 жыл бұрын
Good video. But what about waterproofing after battery replacement? I notice there is some kind of rubber sealant around the edge. Will it still retain waterproof after opening the case?
@ZeeEverything2 жыл бұрын
It will remain water resistance if you pay attention carefully when opening the back cover. Be careful not to damaging the seal. Otherwise, you will have to buy a new back cover to maintain water resistance
@pa2la2va3 жыл бұрын
Thank you soooo much! This step by step helped immensely! Very easy to follow.
@ZeeEverything3 жыл бұрын
Glad it helped! Thank you for your comment.
@Mcabdriq3 жыл бұрын
thank you so much , i did as your video and it really work just fine and noiw my battert last much much longer . thank you so much for step by step process .
@ZeeEverything3 жыл бұрын
You welcome.
@babyturtleegg3 жыл бұрын
Omg...thank you..thank you...thank you!! This video helped me very much. I appreciate the time you took to do it.
@ZeeEverything3 жыл бұрын
You are so welcome!
@JauneVingtCinq3 ай бұрын
Thank you very much for you very well presented tutorial sir. A bit brutal with the utility knife though..Ha! Thanks again!
@jasonbargenquast7382 жыл бұрын
Great video thankyou... Replaced battery, charged to 100 Percent no worries. Just have one problem it wont turn on now. have tried hard reset but nothing. Can you think of something I have done wrong ?? cheers Jason
@ZeeEverything2 жыл бұрын
I apologize for the delay in responding to your question, disassemble the watch again and make sure that you did not break the keyes cable.
@mikeblumhardt2 жыл бұрын
Great video, thank you.
@ZeeEverything2 жыл бұрын
You welcome.
@dariuszkol7507 ай бұрын
Thank you so much. Just perfect
@tewaneyayalneh58554 жыл бұрын
ZeeEverything thank you this was a pro job. I am now your Subscriber. Thank you
@ZeeEverything4 жыл бұрын
I'm glad that my video helped you and thank you for subscribing!
@HNDAKLR3 жыл бұрын
Thanks for the video. Was able to replace mine with your help.
@ZeeEverything3 жыл бұрын
Glad it helped
@otreblayairamful3 жыл бұрын
But I understand you lost the watch Ip68 right?
@ZeeEverything3 жыл бұрын
If you didn't damaging the seal it should be ok. but if you damaged it you should replace the back cover to keep the water resistance.
@mihaistroe873 жыл бұрын
Great video. Will try to replace my batt soon. Do you know if water resistance is still ok after this?
@ZeeEverything3 жыл бұрын
Yes, it will remain water resistance if you pay attention carefully when opening the back cover. Be careful not to damaging the seal
@rgruenhaus3 жыл бұрын
Not actually to IP68 unless water seal is added before back is put on!
@dontcallmehowie4 жыл бұрын
Do you know if the insides of the Classic are the same? I need to change the battery on mine. Thank you!
@ZeeEverything4 жыл бұрын
Yes, the same.
@RickSQM3 жыл бұрын
Great video!! I have one and love it. Couple of questions, where you got the original battery replacement and can you share a link where I can get all this tooling required to make this replacement? Also, the bezel of my Frontier has a failure, there are like 7 clicks that is like no moving the screen, you have a video of that? Very appreciated!! Greetings from Monterrey México.
@ZeeEverything3 жыл бұрын
Thanks for your comment First,, check this link for the battery. www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu Second, for the bezel, I currently don't have the watch with this issue. If I receive a watch with this issue later on from a costumer, I will make a video tutorial on how to fix it.
@ds0rco3 жыл бұрын
Thanks for that, worked a treat! A scary experience though :-)
@ZeeEverything3 жыл бұрын
Glad to hear it! thanks for your comment.
@fabianacosta11223 жыл бұрын
Great Help Thanks
@ZeeEverything3 жыл бұрын
Glad it helped
@89Ssik3 жыл бұрын
Successfully changed battery only top of screen have dead pixels now, but its working.
@ZeeEverything3 жыл бұрын
Thank for your comment.
@rgruenhaus3 жыл бұрын
Sounds like poor connection of ribbon cable with those Pixel problems. Always need firm screwdriver in screw before removal/insertion! Less chance of stripping! Starting screws manually to get the feel that they are seated right before auto screwing and tightening.
@johnnguyen36943 жыл бұрын
Can you tell where to buy the special Y type screw driver for samsung watch
@ZeeEverything3 жыл бұрын
You can find it on ebay or Amazon or any tools store near you, but make sure get size 0 or 1.
@nelsongonzalez1995 Жыл бұрын
Thanks!!
@ZeeEverything Жыл бұрын
You welcome.
@karthik4343 жыл бұрын
Hi, a couple of the rear screws are stripped. Is there any solution to fix and unscrew it?
@ShaozenSC3 жыл бұрын
very nice video & great song choice.
@ZeeEverything3 жыл бұрын
Thanks.
@rgruenhaus3 жыл бұрын
I turned the sound off! Too loud!
@samuelguerra18853 жыл бұрын
Great video!! where did you buy the batteries?
@ZeeEverything3 жыл бұрын
Thank you for your comment, you can find the battery on eBay or Amazon and it's very cheap.
@tinazona4675 Жыл бұрын
I replaced the battery on my watch and I am experiencing the same problem. It will charge and as soon as I take it off the charger it's at 97 percent and in about a few hours it's at 70 percent. It still barely last a work shift?
@quekvincent59813 жыл бұрын
hi, can share where u get the screwdriver for the watch cover? What is the spec? thanks
@ZeeEverything3 жыл бұрын
you can find Y1 screwdriver in many place for me i use this one (kzbin.info/www/bejne/ZmmqkIKvqb-An9U)
@quekvincent59813 жыл бұрын
@@ZeeEverything thanks a lot.
@TheWookiee19774 жыл бұрын
Unlike the video, I replaced my back cover with a new one, which has the waterproof seal pre-installed. I did so, because the glass on the back had cracked & I figured I should kill two birds with one stone. I recommend replacing the back when replacing the battery to retain the water resistance of the device.
@ZeeEverything4 жыл бұрын
Thanks for the comment and the recommendation, it has not happened to me that the back cover breaks with me or the water resistance seal, so I did not recommend that in the video, but if that happens then I must replace it to keep the water resistance. Thanks again
@mikedobsky55514 жыл бұрын
Highly recommend not using a knife or sharp object to open the case. There is a lip on top and bottom that will help with getting the back off without damaging the seal from the sides (it's close to the edge.) Take your time and be gentle. It worked for me and my seal is intact.
@ZeeEverything4 жыл бұрын
What you say is correct in most cases, but some watches are subjected to difficult conditions so that it becomes almost impossible to slot without using a sharp instrument and this watch that I photographed tried to use a plastic opening machine before using the blade, but it was useless and if I watched the video, I only tried to move the cover after that I used Plastic tool.thank you for comment.
@leg3nd3484 жыл бұрын
What kind of screw driver was that you used in the begining of the video that was automatic?
@ZeeEverything4 жыл бұрын
It's Xiaomi wowstick 1F+, i also made a video on it, you can watch it here is the link : kzbin.info/www/bejne/ZmmqkIKvqb-An9U
@Explore5314 жыл бұрын
good job for putting new battery I couldnt that, I wished they had sdcard slot on the watch
@AaronSchwarz422 жыл бұрын
You might do a "fast edit" tik-tok style in 2 min flat, cut out all the downtime & just clips of the action - still add titles - think 4 second clips with titles- perhaps 30-40 clips // just an idea I am mulling around for some of my own KZbin video creation :) Cheers
@ZeeEverything2 жыл бұрын
Thank you for your comment I thinking about that, but my problem with the time I have a lot of videos waiting for editing.
@ehcouldnot3 жыл бұрын
If you open the watch do you lose the water proof seal?
@ZeeEverything3 жыл бұрын
It will remain water resistance if you pay attention carefully when opening the back cover. Be careful not to damaging the seal. Otherwise, you will have to buy a new back cover to maintain water resistance
@ehcouldnot3 жыл бұрын
@@ZeeEverything thank you for the reply!
@abrendan_dev3 жыл бұрын
What watch face do you use?
@ZeeEverything3 жыл бұрын
The watch face name is breathe.
@rgruenhaus3 жыл бұрын
Where would I get that screwdriver?
@ZeeEverything3 жыл бұрын
You can buy it from Amazon or eBay Watch this video can help you kzbin.info/www/bejne/ZmmqkIKvqb-An9U
@janmarkahig49603 жыл бұрын
Will it still be waterproof after? 😅
@ZeeEverything3 жыл бұрын
Yes
@skylights13653 жыл бұрын
What watch face are you using?
@ZeeEverything3 жыл бұрын
The watch face name is ( Breathe ).
@sambireddy56063 жыл бұрын
Please share the link of battery to purchase
@ZeeEverything3 жыл бұрын
check this link for the battery. www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu
@theunconventionalstoner32904 жыл бұрын
Cringed when the razor went near the watch. Hope its yours and not a customers. Other than that well detailed and helpful video
@ZeeEverything4 жыл бұрын
Sometimes you have to use the razor, especially if the back cover is stuck. Don't worry, this is not the first time Thanks for your comment, I hope you learned something.
@dr.shahidsayeed664 жыл бұрын
Where to buy this battery?
@ZeeEverything4 жыл бұрын
It depends on the country you live in, but you can simply search on the Internet to the nearest place to you, and if you can access sites such as ebay, Amazon, Alibaba, the price is appropriate.thanks
@pops638215 ай бұрын
all good video but dont have to take the whole inside out, just remove the 2 screws and battery and replace then reverse the process.
@zonastore49223 жыл бұрын
I already change new battery..but still dead..whats problem sir
@ZeeEverything3 жыл бұрын
First, make sure that the wireless charger is working properly. Second, put the watch on charge for 24 hours, as the new battery may be completely empty. If the watch does not work after that, reopen the watch and make sure that you have installed the battery correctly. If all of that doesn't work, that means you have a clock board problem
@InHerWasLife3 жыл бұрын
fyi for people trying this @825 the ribbon the is trying to pop up don't pop up there is actual plastic that is holding it down, if you flip the watch over there is a screw that needs to be removed to loosen the plastic and when you go and loosen that there still its still not loose enough to slide the ribbon out. So you cant pop it up or slide it out, next time please show people the entire watch exactly what you are doing because i found multiple places in your video that you did not show the watch and things that are being blocked
@ZeeEverything3 жыл бұрын
I apologize if the video did not help you repair your watch In this video I showed you everything you need to replace the battery safely and quickly and I did not hide anything. I have replaced several batteries for Samsung watches and have not used any different technique and have been 100% successful Thanks for your comment.
@hessadventures85994 жыл бұрын
What type of screwdriver is that I must own one.
@ZeeEverything4 жыл бұрын
You need Tri-point Y1 and Phillips 0 screwdriver
@Cassadin14102 жыл бұрын
Can somebody confirm how change battery life before and after replacement? It is still Waterproof
@ZeeEverything2 жыл бұрын
1- If you buy an original battery, the battery life will be 90% of the battery life in the new watch 2- It will remain waterproof if you pay careful attention when opening the back cover. Be careful not to damage the seal. Otherwise, you will have to buy a new back cover to maintain the water resistance.
@Cassadin14102 жыл бұрын
@@ZeeEverything So can u tell how many days can it work? Of how long gps can be tracking? Is that worth to replecment? New batery Coast Around 25-30€ and honor gs pro with briliant battery life Coast about 120-145€.
@Cassadin14102 жыл бұрын
I m tryed yet my watch gt while ran. From 100 to 28 % in les than 40 min..without music and aod
@ZeeEverything2 жыл бұрын
I suggest you replace the battery with an original one and then do a factory reset for the watch and the battery will last you at least 20 hours with use.
@grahamhgt64684 ай бұрын
Congratulations to all the people who wrecked their watch attempting this 😅
@JosephRedondo3 жыл бұрын
can you include the links to your tools? thank you
@ZeeEverything3 жыл бұрын
Which of the tools need its link?
@efernandez102519843 жыл бұрын
Replaced the battery now watch won't turn back on but says it's charged 100%
@ZeeEverything3 жыл бұрын
I hope you didn't cut the power switch cable. I recommend that you rewatch the video at the time of 8:15 because I have stated that there is a cable for switches, you cannot disconnect. Reopen your watch again and make sure that there is no issue with this cable.
@knighthawk37593 жыл бұрын
Using a razor blade to pry is just about the most unsafe and irresponsible thing I've ever seen anyone do with any type of repair job
@ZeeEverything3 жыл бұрын
I agree with you, but sometimes you don't have many options I have two options (razor or hot air gun) but not everybody have the hot air gun, I liked the tools being accessible to everyone. Accept my regards and thanks for your comment
@dragonspirit11853 жыл бұрын
a Y1 bit is not working
@zotoasoriel61603 жыл бұрын
y'a plus de joint la montre n'est plus étanche !!!
@ZeeEverything3 жыл бұрын
Si vous n'endommagez pas le joint, cela devrait aller. mais si vous l'avez endommagé, vous devez remplacer le couvercle arrière pour conserver la résistance à l'eau. remarque: j'ai utilisé google translate
@akshayagu66992 жыл бұрын
Battery buying link
@Sweetlovessss3 жыл бұрын
Can i ship to you and u fix it for me , i ll pay
@ZeeEverything3 жыл бұрын
If you are not able to repair it yourself, even though I see the matter is not very difficult, then search in your area for a shop that specializes in repairing electronic devices. As for sending it by mail, I do not see it as a good idea. But if your place of residence is close to me, I will be happy to serve you
@TheUniversalTruthLLC Жыл бұрын
This video is okay but I'm telling you way too much of the time or we get to see is your hands I think you should redo it.
@InHerWasLife3 жыл бұрын
dont waster our time take your watch to go get fixed by a professional this video has a lot of missing thing that they dont tell u like a screw under everything take out the final ribbon at 759 and the the ribbons are so damn touchy by doing that he just did in the video it doesnt come out easy or at all and snapped doing what he just did
@theunkownmr.5624 жыл бұрын
Great way to ruin the back of the watch
@ZeeEverything4 жыл бұрын
If you do not take care when you are working or if you are in a hurry or you do not have the slightest kind of experience then surely you will destroy the back of the watch just follow the instructions and I am confident you will accomplish the work perfectly. Thanks for your comment