How To Replace Spark Plugs and Coils on 2012 Nissan Juke

paypal.com/paypalme/avoal
Tools Needed
Pliers amzn.to/3Z8S1nD
9/16 Spark Plug Socket amzn.to/45JGmOA
12mm Socket amzn.to/3rh3jcG
7mm Socket amzn.to/3Rg4sMs
10mm Socket amzn.to/464In7B
3/8 Flex Head Ratchet amzn.to/3PvD8Zh
Porter Cable Drill amzn.to/3EvaZv8
3/8 Adapter for Drill amzn.to/461WQ4g
3/8 3 Inch Extension amzn.to/487u5VH
#ad

[@renelogeais2941]

I have done it this way. While it is relatively simple, some parts are not necessary to remove. The big hose at the 1 minute mark doesn't need to be removed. The three nuts at the 1:37 mark is necessary. At the 1:42 mark, that metal piece doesn't need to be removed as the hidden bolt is a pain to put back in. What needs to happen here is unplug the electrical connector and the two small hoses that run along the top of coil packs 3 & 4 and disconnect the hose that attaches to that metal piece. those three hose clamps are fairly easy to squeeze with your fingers. Once those items are disconnected, you move that large metal intake out of the way just as shone with the big hose. At the 2:22 mark, that hose does need to be disconnected as shone. Then you can move all the disconnected hoses out of the way and have easy access to all coil packs. I would highly suggest getting the right size spark plug socket to remove the spark plugs, it will save you some aggravation.

[@nigellbk]

Bro you did great job explaning the change thanks a million man

[@AudoFixMobile]

Of course anytime 😊

[@doc9441]

What gasket is that, you said could be replaced?

[@AudoFixMobile]

Gasket for that inlet tubing part. Part number should be 14465-4P200

[@doc9441]

Wow thanks for the part #. I have a 2011 would the part # be the same?

[@AudoFixMobile]

@doc9441 probably. But it's a good reference number to go off of if you call parts. Just give them the first 5 and they will get pointed to the correct part number for that part. But honestly should be the same

[@jonfranks6902]

What size ratchets again?

[@AudoFixMobile]

Sorry for late reply. I just added the tools I used for this job. Really affordable. Also the impact guns drill is optional. It makes the job go by quicker and so much easier.