THE TOOLS: • NKG - LKR7DIX-11S - Spark plugs x6 - amzn.to/412GBRT • 10mm Socket - Basic Socket Set - amzn.to/3fjRoBd • 5/8 Spark Plug Socket - amzn.to/410bPco • 3in Extension x2 - amzn.to/3GleRQG • Ratchet - amzn.to/3xWjE5g • Torque Wrench - amzn.to/3fEIrDi • Gloves - amzn.to/3bbfEnu Chapters: 00:00 Intro 00:24 Tools & Supplies 01:35 Remove the Engine Cover 02:11 Adjust Size Spark Plugs 02:22 Locate all 6 coil packs 02:33 Remove Bolts on Coil Packs 02:49 Disconnect Wire Harness 03:02 Remove Coil Pack 03:18 Remove Spark Plug 04:45 Compare Old & New Spark Plugs 05:01 Installing New Spark Plug 06:37 Clean Coil Pack 06:46 Add Spark Plug Boot Protector 07:21 Install Bolt for Coil Pack 07:59 Reinstall Wire Harness 08:08 Remove & Install other spark plugs 08:39 Testing Vehicle This video works on all makes and models of vehicles. The video was done on a 2014 Honda Odyssey. Check out my website at mcfixit.us #odyssey #sparkplugs #mcfixit #sparkplug Links are associate links. A small portion of whatever you buy helps support this channel. Thank you for clicking on the links and purchasing to help out this channel to keep making great content for you! Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #autorepair #odyssey #honda #channgingsparkplugs #carrepair #mechanical -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5M * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
@Nofiamich3 ай бұрын
Rear plugs That's what I need a video about. (Edit) but based on this video, I got-r-done! So thanks!
@MCFIXIT3 ай бұрын
I wish I could record that but it’s super difficult to get a camera in that location. All you’d see is my hands. I have some helpful tips on how to do the rear ones but it just wouldn’t make a good video. They are super similar to the front though!
@Nofiamich3 ай бұрын
@MCFIXIT Based upon what you Did show, I was able to get the back done too! I wish I could post a pic of the red coil packs. They look good on the engine, so thanks! 🫡
@MCFIXIT2 ай бұрын
I’m sure they do! I’ve thought about doing a colored coil packs but I just normally get the normal black ones.
@Nihilator5 ай бұрын
I have never changed spark plugs, but thanks to your video it was easy - especially with the little tips you gave about how to handle tight angles.
@MCFIXIT5 ай бұрын
You are welcome! Thanks for watching and commenting!
@jamescc2010Ай бұрын
Nice you had listed all tools you need.
@MCFIXITАй бұрын
You are welcome! Thanks for watching and commenting!
@jhulin90183 ай бұрын
Excellent. Very helpful with Torque settings and tools and spark plug gap, etc. Couldn't ask for better. Thanks for putting out good clear and concise content.
@MCFIXIT3 ай бұрын
So glad you found it helpful! I try to do the same content quality for all of my videos unless I’m unable to find the proper specs, which does happen sometimes on older vehicles.
@anthonychase494521 күн бұрын
Use anti seize on spark plug threads and dielecteic grease on plug covers.
@MCFIXIT19 күн бұрын
Definitely an option! I’ve done that many times before. Service manual does not call for it (probably too many issues with people doing it wrong or putting too much on). Thanks for the comment and for watching
@davegaetano71183 ай бұрын
It's the rear spark plugs that people actually need help with. For starters, how do you remove those doubled black clip-ons that are in the way of hand positioning?
@igl92733 ай бұрын
Agree. Let me know if you find a good video, please. Thanks
@davegaetano71183 ай бұрын
@@igl9273 i couldn't find anything on how to get rid of those black things. It looks so simple to take them apart, but I simply can't figure out how to do it. So of course I'm just working around them, jamming my wrist up against them. On Monday I'm planning on buying the VCM Tuner II. It is supposed to permanently disable the VCM activation. I hope that will take care of the spark plug fouling and the coil dying. It's $140 but I expect it'll be more than worth it.
@MCFIXIT3 ай бұрын
Shooting a video of the back is nearly impossible. I tried it on my Ridgeline (same engine) and it didn't come out well. This is even a tighter location which makes it even more complicated.
@MCFIXIT3 ай бұрын
Please let me know how the VCM Tuner II works. I heard about those before but not used them.
@ScottishFox18 күн бұрын
You don't remove the strip on top of the engine. The spark plugs are just behind them. Almost impossible to see but you can easily reach a hand in and feel them. They are a pain but definitely reachable without taking anything else apart.
@knightzcross419 Жыл бұрын
Great video! Excellent help! Thanks for making this video. Most of Hondas V6s are set up fairly the same, so this works for a few different applications! Keep up the great work!
@MCFIXIT Жыл бұрын
Thanks so much! Yes, the Honda Ridgeline is very similar. I’ve got a video of my 2006 on my channel.
@marcusnorton456 Жыл бұрын
Great video. How hard were the back ones to do? I know its hard to show on the camera due to the angle.
@MCFIXIT Жыл бұрын
Thanks so much for watching and commenting. The back ones were harder. One of the sides was the most difficult, I believe it the was the left side. A little maneuvering and you can do it. There’s also a hose on the top that can be removed for easier access on one of the spark plugs.
@brianweber356Ай бұрын
@@MCFIXIT What is that hose for? If I just loosen the nut and move the hose out of the way, will any other fluid spray or leak out?
@hgushiwet88013 ай бұрын
Thank you for explaining. My don't have problems to start but the needle start dancing at 1500 rpm and the car is kind of jerking? What do you think the problem is?
@MCFIXIT3 ай бұрын
That can be caused by a lot of issues. I’d first check to see if there are any codes it’s popping up with a scan tool (or do a place that will do it for free). Then depending on that, fix any issues. If none, I’d check for leaks in vacuum hoses. How old/miles are your spark plugs? Coil packs? Have you cleaned the throttle body & I think they have a mass air flow that can be cleaned? Also how many miles does it have? I haven’t had this vehicle in about 2 years and I’m trying to remember all of its components that could cause this.
@daviddavis1322Ай бұрын
Brother, thanks
@MCFIXITАй бұрын
You are welcome!
@garypritchard978710 ай бұрын
Like your wrist band, brother! Be good to use antiseize on spark plug threads to keep from stripping out threads in heads.
@MCFIXIT9 ай бұрын
Yes, I've done that in the past, but Honda does not recommend that. I know it can mess up torque specs. But it does make it easier if you live in the north in the rust belt. Thanks for noticing the wrist band :D
@erickmarquez8986 Жыл бұрын
Do you know the cylinder firing order? Are the 3 in the back number 1, 3, 5 or 1,2,3?
@MCFIXIT Жыл бұрын
Sorry, I don’t. This was on my sister in laws vehicle. I’m not that familiar with this vehicles cylinder firing order.
@cwhip24328 ай бұрын
The back are 1,2,3 left to right Front is 4,5,6 left to right
@eyeheartsushi22128 ай бұрын
@@cwhip2432Thank you for confirming this!
@davidhawkins45211 ай бұрын
Gets to the tools needed .. Me: I’m out !
@MCFIXIT11 ай бұрын
That’s why I like to put them up front so everyone knows what they are getting into on my videos. Hope you can still get it fixed
@Wing-n-surf11 ай бұрын
Main problem for me was disconnecting wiring on rear cylinders.
@MCFIXIT11 ай бұрын
Yes. They are tricky and I can’t film that area well
@ryanw43346 ай бұрын
Every time he says “NKG”……. 🤦♂️
@MCFIXIT6 ай бұрын
Yeah, words are hard. I try my best. Thanks for watching my video and commenting!