How to Replace Starter 2003-2008 Toyota Corolla

Рет қаралды 163,319

TRQ

Күн бұрын

Пікірлер: 54

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@austinlawson4930 5 ай бұрын

Great video, I used the advice you gave, but instead of jacking it up, I just pulled my fan out. Gives you a lot more space to work if your using hand tools, and also makes it easier to remove the starter and fit the new one in.

@andypascoe4901 5 ай бұрын

This video is 100% accurate. However, it's a little deceiving because the camera fits into the space in front of the motor. My head does not. Just be aware that this video shows you where everything is, but it's a little harder to see. Awesome video! Thank You!

@UbongaShorts Жыл бұрын

Just got my first car a 180k miles 2005 corolla s. Love seeing these videos!

@Truth-in-Full-Daylight Жыл бұрын

Best video for working on cars I've ever seen!

@LesterFougere 2 ай бұрын

Thanks for making your videos so plain and simple. Their excellent,Lester

@Jake-im2lv 7 ай бұрын

I removed the fan shroud and then had easy access to remove the starter. 330k km and the original Denso starter begun to intermittently spin but not kick out the Bendix. A disassembly, clean, and spot of grease on the gears and oil on the bushings and it sounds and works like a new one!

@mattfisher8976 4 ай бұрын

Thanks man. I just did this and dang it felt good to do it by myself

@matthewchambers817 9 ай бұрын

Worked great! With a second person helping, we managed to get the new starter in from below without raising the car. Love how high off the ground these Corollas sit!

@dollofshadows1703 Жыл бұрын

Excellent video! Very helpful, clear and concise!

@lyndahobby2413 Жыл бұрын

Idk …..I didn’t take out the fan nor did I jack up the car…..couldn’t use a reg 3/4 inch wrench since it hit the plastic fan but COULD use a short/small handle 1/4 inch wrench and a short 12mm socket to remove elec connection bolt . The other two bolts I removed with a regular 3/4 wrench . Then I removed 2 clips from the plastic splash guard and wiggled it out the bottom. Did the same thing in reverse to reinstall.

@josenavarro2408 2 ай бұрын

Nuestro capitán!!! Trasmite mucho nomás de verlo 💪 visca barca.

@archivaldo4310 Жыл бұрын

Great video This helped a lot I have Ramps so it should be easy access from the bottom

@goooseslipppery6325 4 ай бұрын

Can’t believe it’s that easy will for sure be doing this myself now

@TRQ 4 ай бұрын

+@goooseslipppery6325 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@Kat-rv5rj Жыл бұрын

Great video as always

@MrInternationalG Жыл бұрын

Great clip thanks! I had a better time loosening one of the bolt from the bottom. Regards

@lewinSiko 8 ай бұрын

Straight to the point !

@davidfigueroajr9462 Жыл бұрын

I ask because I have a Corolla 2001 and this channel is awesome and I learn a lot about xb and now Corolla but here is a 2003 Corolla and I have a 2001 so I don’t know if is same parts

@js-tu7iu Ай бұрын

What is the power tool you're using on the middle bolt keeping the starter in place

@rendor21 7 ай бұрын

Serious Question, do you keep the electric radiator fans in place to protect the radiator?

@ro-landocalrissian4633 11 ай бұрын

I replaced mine on an 03 Corolla with a Toyota starter around 2014 & it just got messed up today in 2024. Is that normal for it to go this soon? Also, should I get an original Toyota starter or can I buy another brand? One last thing, is it possible for a mechanic to damage the starter while working on something else?

@SystemCrasher113 2 ай бұрын

Excellent video thanks

@calvinblackrosejr4890 5 ай бұрын

great video thank you!!! 😁

@jjuancalvy85 Жыл бұрын

Actually it’s easy if u just remove the fan assembly and it’s a lot faster no need jack the car up or nothing comes from top with fan out the way

@JoseDiaz-lg4fn 23 күн бұрын

Any help I have a new starter in hand but the old clip to clip it on broke know it don’t clip on the reason why it broke. It was too old when I pulled out it just cracked to dust. Know the starters not stain click on. What should I do

@SonsOfThunder229 Ай бұрын

will trying to start the engine damage the flywheel? I hear the clicking, i imagine thats the flywheel trying to engage

@rsalas921 Жыл бұрын

I feel like I over tighten the electrical part. I’m sure I would of known if I broke it right?

@ohyeah5601 Жыл бұрын

Great Vid😎👌

@invent5540 4 ай бұрын

2008 Corolla .. I found it easier to remove the electric cooling fan, two 10mm bolts. Also, I removed the signal connector after disconnecting the starter... much easier.

@RibeyeSusie 7 ай бұрын

Thanks for the vid. We did it successfully! 😊

@buya_pr 5 ай бұрын

Great video. Very helpful

@theglamthropologist Жыл бұрын

thanks this worked great for me! however i did take out the fan which was extremely simple, so I didn't have to take it out through the bottom.

@joelreyna4675 Жыл бұрын

What attachment or tools did you use to remove the bolt at 1:30?

@michaelgines6500 Жыл бұрын

Very helpful. Thanks!

@user-jw1yj6um9v 3 ай бұрын

Great video

@Javier-tr3vz Жыл бұрын

Muchas gracias!!!!!

@nonyadamnbusiness9887 Жыл бұрын

This is alright but it's easier to pull the fan that it is to jack the car up and wrestle the starter in place. Also, beware. I just replaced a good starter because even though it would roll the windows up and down and turn on the headlights, it wouldn't click the starter solenoid.