Awesome thank you! Glad to hear it’s still helping people out!
@user-gu5lc6ve2s Жыл бұрын
WAAAAY easier to follow than the last how-to-do-this video that I watched! Thank you for making it easy to follow. I think I can. I think I can. I think I can. 🚂
@hankssmallengines8654 Жыл бұрын
Haha hey just saw this comment, no problem glad it was helpful for you!
@Evan_briden Жыл бұрын
Thanks homie! Got this done in 45 mins. The chain connecting clip is tricky!!!!
@hankssmallengines8654 Жыл бұрын
Yeah no problem man glad you enjoyed it! Yeah that’s always the hardest part 😂
@johndeer65602 жыл бұрын
Best video that explains what to do!!!!
@hankssmallengines86542 жыл бұрын
Thank you! I appreciate it!
@hamzaattili74552 жыл бұрын
There are a lot of videos on the Internet on how to do this but this is the most helpful and easy one thanks a lot appreciate it
@hankssmallengines86542 жыл бұрын
I appreciate the feedback glad it helped!
@thislife23633 жыл бұрын
Yahooo!!! New video! I don't know, why I watch it, I haven't quadro, but it's very interesting🤔
@spencerfurudzai46797 ай бұрын
🎉🎉🎉🎉🎉 you made it possible for me 💓
@hankssmallengines86547 ай бұрын
Hey that’s awesome man glad I could help!
@jaidenrips88473 жыл бұрын
Thanks you actually explain things, I’d appreciate it if you followed me back I have an 07 trx400ex.
@hankssmallengines86543 жыл бұрын
Yeah glad it helped you out!
@jaidenrips88473 жыл бұрын
@@hankssmallengines8654 but you should make some more 400 videos💯
@hankssmallengines86543 жыл бұрын
@@jaidenrips8847 yeah lmk what you want to see!
@jaidenrips88473 жыл бұрын
@@hankssmallengines8654 anything that involves ripping the 400 your editing is fire
@hankssmallengines86543 жыл бұрын
@@jaidenrips8847 haha ok man sounds good i love doing that stuff.
@zacharyesplin92922 жыл бұрын
I gotthe exact same. Kit good shit bro love your vid
@hankssmallengines86542 жыл бұрын
Thanks man appreciate it !
@kevinarmstrong7469 Жыл бұрын
Great video very detailed really simple but really helpful thanks
@hankssmallengines8654 Жыл бұрын
Thanks you! I’m glad it helped.
@garrettmehan3904 Жыл бұрын
Love this!!! Only issue is my bolts where the alen keys go is stripped :( lol
@hankssmallengines8654 Жыл бұрын
Ooh yeah that can happen that sucks. Try using an easy out to get it out and then buy new ones.
@douglasmartinez8656 Жыл бұрын
Great video.
@hankssmallengines8654 Жыл бұрын
Thank you I appreciate it!
@dolfgabanna59522 жыл бұрын
Great video bro very helpful. Hows the kit holding up? also what kind of riding do you normally do, considering getting this kit as well.
@hankssmallengines86542 жыл бұрын
Thanks man I appreciate it! Yeah I do mostly trail riding but I ride really hard. Like going as fast as I can through the trails most of the time. I also did a lot of wheelies on that quad and this kit seemed to have to good low end torque as well as top end speed. But I actually sold that quad and god a 450. But it was still in great shape when I sold it.
@chadcowan80553 ай бұрын
Why not just get a longer chain? And rivet it? With a master link ?
@hankssmallengines86543 ай бұрын
Because then you don’t have room to tighten the chain once it starts to stretch out
@erichemmelgarn46232 жыл бұрын
Couldn’t get the front sprocket on so I left the old one on there. It looked decent enough. What was your secret to getting the front sprocket on? I bought the same kit
@hankssmallengines86542 жыл бұрын
As far as I can remember it went on pretty easy for me. But it does have to go a specific way so make sure that you had the correct side pointing out. You’ll probably be fine leaving the old one on but it would be best to get the new one on if you can.
@hankssmallengines86542 жыл бұрын
As far as I can remember it went on pretty easy for me. But it does have to go a specific way so make sure that you had the correct side pointing out. You’ll probably be fine leaving the old one on but it would be best to get the new one on if you can.
@mavic51493 жыл бұрын
Hey can u do a How to change Bearings ?
@hankssmallengines86543 жыл бұрын
The front bearings ?
@joshh4778Ай бұрын
@hankssmallengines8654 any maintenance videos would be awesome. Just picked up an 07 400ex and it needs a lot of basic TLC. did valves then a new carb after I couldn't get the cheap chinese one to tune. Flushed/bled brakes, changing chain/sprockets this weekend then rear brake rebuild (master cylinder & caliper). Will upgrade suspension this fall and most likely upgrade to a 450er next Summer.
@robertcourtney7030 Жыл бұрын
Question, can't seem to find a answer, so maybe you have one!? I can get sprocket on and the lock washer. However the whole sprocket can slide off of drive shaft. No matter which way I put the Sprocket and lock washer on it does not line up and will not stay on the drive shaft. Am I doing something wrong??
@hankssmallengines8654 Жыл бұрын
I think I know what you mean sometimes it’s tricky to line up the lock washer with the sprocket. All I can tell you is make sure your putting the sprocket on the right way and if you can get the lock washer on far enough there should be a little ring of space where you can spin it to line up with the screw holes. Hopefully this helps.
@robertcourtney7030 Жыл бұрын
@@hankssmallengines8654 thanks for the reply, upon further research the outer splines are broken off, think I found a fix that allows me to make something work
@hankssmallengines8654 Жыл бұрын
@@robertcourtney7030 awesome glad you figured it out👍
@dadawgjaiden3 жыл бұрын
Do I have to take the oil out to replace the red case bolts?
@hankssmallengines86543 жыл бұрын
No thankfully you do not.
@eliwengerd49892 жыл бұрын
Should the front sprocket be a little wobbly
@hankssmallengines86542 жыл бұрын
Yes it will be wobbly that’s normal
@joshh4778Ай бұрын
@@hankssmallengines8654good info, I didn't know this
@josephhamilton518523 күн бұрын
It’s ten times easier to use pliers to get the locking link on lol
@josephhamilton518523 күн бұрын
Also might wanna start covering the rear brake with your right foot when riding wheelies. Don’t end up a piece of pavement pizza cause you looped out
@IOzyNX2 жыл бұрын
What light bulbs you got in that
@hankssmallengines86542 жыл бұрын
I custom installed LED pods into my shroud.
@andresmgna4692 Жыл бұрын
The wire you grabbed at 2:18…. Whats that wire called
@hankssmallengines8654 Жыл бұрын
I don't know the exact name but it's a ground.
@andresmgna4692 Жыл бұрын
@@hankssmallengines8654 i got it. Its the neutral switch w/ reverse.
@rajanrairealty89792 жыл бұрын
how it break how many miles
@hankssmallengines86542 жыл бұрын
I hit a rock and it broke the chain
@smr4712 Жыл бұрын
thanks
@joepaula56453 жыл бұрын
How did you remove the old chain?
@hankssmallengines86543 жыл бұрын
There is a master link that you can take out and then get the chain off