Hey Guys I've noticed this video has helped a lot of people out and I'm very proud of that if you guys could I've noticed this video has 20k people that's watching and 90% has not subscribed or like the video if it's helped you in any way please take 2 seconds to like and subscribe so I can keep putting these videos out . Thank You All ❤
@davekalf54802 жыл бұрын
Great video...thanks! I just replaced the clutch and rear main seal on an '03 with 3.8L. I found I had to remove the shifter 'fork' out of the transmission too. This made it easy to slide the tranny back. I left the driveshaft in the trans so no oil spilled. I used a ratchet strap to hold rear of driveshaft up. As he said in the video...remove trans from bell housing and then you can leave the exhaust system installed. Cheers
@foreignalex3882 жыл бұрын
I just worked on someones mustang and this video was great !! Appreciate it
@battldogeurmum6983 ай бұрын
Bold of you to say “clean work” with an interior that dirty. 😂
@RickRad094 жыл бұрын
Great vidéo ! The infos I needed. Thanks ! How high the car must be from the ground for good clearance ?
@israelsattleen9 ай бұрын
Good video bro
@axtaxt29643 жыл бұрын
So we just aren't going to address the pilot bearing or the rear main seal?
@ob_gyn_inc3 жыл бұрын
Or the fried pressure plate...or the clutch fork pivot
@kelpking4484 Жыл бұрын
Don't touch it unless it's leaking pretty self explanatory
@jefflargo21952 жыл бұрын
You don't need take it off from the bell housing take the whole tranny of
@kraze24754 жыл бұрын
"Make sure it touches no metal" :puts it on the same side as the alternator
@alreyes525 Жыл бұрын
Wow, this video wasn’t helpful. I was looking for a video on how to replace a clutch and it just shows the removal and not the replace part.
@fixingeverything1329 Жыл бұрын
Ha that's funny man so basic mechanic knowledge is the same way you took the clutch out is the same way it goes back in . Its probably best you take it to a shop if you are struggling to put the clutch back in especially since this video shows you the removal process. Thank you