How to Replace the Cup Holders on a Lexus ES300

How to replace the front and rear cup holder in a 1998 Lexus ES 300.

[@RickTroutner]

Just a tip if it's not mentioned already you can move the shifter without the car on by removing that tab on the top left of the shifter it reveals a white button that when you press it allows you to move the shifter wherever.

[@ClintHolland]

Great tip Rick. I will pin this to the top to help others.

[@tmharrigan30]

Very thankful as always with your es300 videos! My mouth dropped when you removed it within 2 seconds lol. I thought mine was going to snap in half as I was trying to pull it from the console​. LOL I was trying for like 5 minutes. I finally got it. And thanks again.

[@ClintHolland]

Awesome. Glad it helped.

[@cbr5036]

Thank you, straight forward, easily done for even the novice.

[@echoday8376]

Great! Been looking to replace this for a bit! So helpful ⭐🌟

[@njseashorechas2698]

Excellent video, Brief and to the point. Thanks!

[@Sjohn1107]

Thanks Clint! Did mine today and did it exactly how you instructed. As referenced in the pinned comment above, yes, you don't "need" to remove the 4 screws. However, if you do its not a major issue at all. You just will have to disconnect the plugs underneath the console which will completely free the console for you to take it out. I actually prefer removing it all the way out because you can align the cup holder screws so much more easier with them falling out of place. Either way there is no harm in Clint's method..just adds an extra step that is not shown (removing the wires). Thanks again!

[@ClintHolland]

Thanks Shawn. Glad it worked out for you and thanks for the kind comments.

[@coolmotors5057]

Thank you for this we were able to assist our customer with his ES300 he just bought from us. Many thanks from Arizona

[@ClintHolland]

Glad I could help.

[@dbmomof03]

Hi Clint, thanks for making the instructions in your videos, easy to a beginner. I bought a 1999 Lexus ES300 recently. I'd much rather try some things myself save a buck or two, before going to a mechanic shop. Thank you!

[@ClintHolland]

Absolutely. That's why I make these videos. More coming on the Lexus so stay tuned.

[@stevenlewis9403]

Nice instructions. To the point and very useful. Thanks for taking the time to make it.

[@ClintHolland]

Absolutely Steven. I enjoy doing it and helping out.

[@curtisjacksonsr.7322]

This was and is the best site ever ty so very much

[@stevesanouk3475]

Thank you so much wish I saw this before I went to the junk yard. I couldn't get it off, now I will.

[@alejandrollamas692]

Thanks for your knowledge Bro...

[@frankpinto4537]

Your vidio was consise and to the point Thank You.

[@benjaminb.1980]

Nice video. I took mine apart a few months back on trying to modify the cup holders with a dremel tool only to find out that it was nearly impossible and too much work and didn't want to take the whole weekend away. Lol

[@ClintHolland]

The amount of work required just to replace the cup holder is ridiculous but then again, nothing is easy anymore.

[@789456456123]

Thank you so much for this video. I went to do this the other day and got a little intimidated. Funny enough, the ES300 I bought had both cup holders and the ash tray broken. I feel like you made this video specifically for me and people like me ;)

[@ClintHolland]

You feel that way because I did. I actually made this video at the request of another user so I kind of did.

[@jjw56837mjk]

Is the cupholder replacement the same for the 2002 ES300?

[@tmharrigan30]

789456456123 I tried to pull out the cupholder and it wouldn't budge. So I knew if I jumped on KZbin and scrolled threw Clint's video's he would be the one who I could count on! He's an angel for these video's!

[@CarlBakaTTV]

Toni Harrigan where did you guys buy the cup holder

[@Goofiness]

Do NOT! Do NOT!!! remove the 4 pan metal screws on the outside of the cowling (plastic cover that sits above the "hump" in the middle) those screws in the 1997 version of the ES300 that he says you may have to move the seats to access, they only hold the center console storage box in place in the console proper. IF you remove them that box can, and in my case DID "shift" or "drop" out of position and then you have an entirely different set of alignment problems which MAY prevent the cupholder from opening AT ALL. I solved the new problem by disconnecting all those electrical leads underneath which allows you to pull the center console entirely, which allows you to install the new cupholder without odd angles... BUT if you don't take out those 4 screws - this video is perfect... easier if you disconnect the electrical leads, BUT I WOULDN'T HAVE GOTTEN THERE WITHOUT THIS VIDEO GUIDE, so just my 2 cents worth to Clint's mucho-money saving guide.

[@ClintHolland]

Good to know. I don't have a 97 to know but I will move your comment to top to hopefully warn others. Thanks for letting us know and thanks for watching.

[@LisaKate2010]

OK, OK, soooo, I have the '97 Avalon, the console of which, I mention elsewhere, looks exactly like this. If I do NOT remove those, "cowl," screws, will I still be able to gain access to the underside of the entire console? (As mentioned in my other comment, I'm actually trying to retrieve my darned drivers license...not replace the drink holder.)

[@LemurTech]

Thank you! So glad I read this, finally, after tugging a big at my rear cup holder! Worked like a charm.

[@marileemitchell6869]

Having trouble reaching the two bolts under where the rear cup holder should be. My model has a panel instead. 2002 ls300

[@m.saifurrahman9583]

I removed the bottom 2 bolts and the 4 side screws too as shown here but the console still is not lifting up!

[@lbbwlbbw2]

Thanks so much for this information!

[@ClintHolland]

Glad I could help. More videos on the ES300 coming soon.

[@iTsDSong]

great video :D

[@charliebay9441]

I'm with Goofy. Great video, and I never would have gone about it as described. And the area under the shifter piece was gross. Even more so under the storage compartment. BUT, you do NOT have to remove the four screws that hold the inner storage compartment to the outer plastic. Simply unscrew the 2 screws near the shifter, and the 2 under the rear cupholder and unclip the wiring to get the storage unit out. And if you need to take the little fake leather piece off the front of the cupholder like I did, gently pry up the 2 tabs that hold the piece onto the cupholder. Having a magnetic screwdriver is a near necessity to get the 2 screws in the back of the cupholder.

[@chaseduhon]

VERY helpful!

[@terryholder657]

Video makes it really easy!

[@ClintHolland]

Thank you.

[@vanquach7624]

good video and very helpfull

[@jessejackson6010]

Helped out.

[@lexusfan100]

nice..more ES videos!!!!

[@carrollharris4843]

Great! Looks like this would be same for a 2000. Correct? Very, very helpful. I was wasting my time and headed for trouble. Appreciate your help.

[@ClintHolland]

It should be roughly the same for any model between 1997 and 2001. Roughly. Basically my way of saying it should be, but who knows.I only have the 1998 model.

[@creecreeleisha5232]

Awesome vid!! I would like to see if you can show us how we can get an aux cord or even Bluetooth without having to replace the one stereo

[@ClintHolland]

Thanks. The best way would be to replace the stereo for that one. If you want to keep what you have, I would recommend picking up a bluetooth to FM transmitter off Amazon. They are pretty cheap and will let you play your music through bluetooth to any FM radio.

[@vernonloften5248]

Simple and straightforward. Great presentation. How about something on replacing headlight assemblies. Thanks from arkansas

[@ClintHolland]

Got it. I will add that to the list. Thanks for watching.

[@outlinesport]

@@ClintHolland Hi Clint, I'm also interested in a video procedure on how to replace headlights / bulbs. Thanks

[@chrisgeorgia2164]

Thanks man!

[@celrey5867]

yo tengo uno año 98 pero en mexico es difícil conseguir partes la verdad, me gusta el modelo porque es seguro en carretera

[@kattucker9438]

I need to replace the cup holder in a 1995 Toyota Avalon. It seems like the instructions might be very similar to this? Should I attempt or continue searching for a video specific to the Avalon? Thank you for reading this.

[@markwout7424]

Thanks for explaining, now it looks do-able

[@shorty6244]

Thank you soooooo much!!!!

[@ClintHolland]

Anytime. You are very welcome.

[@mdanielson5038]

Thank you very much.

[@bigbang4540]

Thanks!!

[@romanoorlando7041]

Clint - thanks for your response. Do you have any hints on changing a 2002 es300 cup holder? Have you ever done this?

[@ClintHolland]

I don't but see if this diagram helps at all. www.carid.com/2002-lexus-es-oem-interior-parts/lexus-oe-center-console-3218146483.html

[@jeanniesullins6563]

Thank you for the video I dropped a anklet down between the top of my up holder closer. I’m goinyto try to remove

[@ClintHolland]

Good luck.

[@veronicaandrei4536]

Great video. Thank you. What if only driver's side cup spring that holds cup came off? Is there a way to just clip it back in without taking the whole thing out?

[@ClintHolland]

Doubtful. You might could pull that off but it would be very difficult without removing it and since removing it is pretty easy that is my recommendation.

[@darlenefrazier9343]

Thank u sir

[@derickgillispie1396]

Hey Clint thanks for your videos! Do you still have your ES ? Any idea how to fix the memory buttons on the front drivers seat ?

[@ClintHolland]

I don't drive it anymore but it is still in the family. What kind of problems are you having with them? Do they not work at all ?

[@raychiu9275]

Thank you for the great info!

[@manuelabolton6748]

Thank you. How about the front ashtray? Thanks again.

[@ClintHolland]

Probably not what you are looking for but I do have this video on how the catch works. kzbin.info/www/bejne/fIHOg2N6lJKnisk

[@GiangNguyen-je4yk]

I really like your video and appreciate your it. I saw your video on removing power outlet below the stereo, I replaced it ,works fine, but there is one more power outlet inside the storage unit on the right of the driver seat. I don't know to remove that, i would be great if you can make a video on that. Thanks 1997 Lexus ES300

[@ClintHolland]

Thanks. I have that request added to the list.

[@boostleesf]

Nice!

[@wmboi89]

I have a toyota Corolla 2015 and I need help on how to replace the rear Cup Holder it’s just one on the back of center console

[@brockturner3112]

Did you replace that shifter knob? Looks brand new! Do you know how to replace or refurbish that?

[@ClintHolland]

Nope, that's the original one. You can buy replacement ones on Ebay. I believe to remove it if you will take off the trim plate around it, you will see the screws under it to remove it. That is just from memory though.

[@ronniemckenzie5029]

@clint Holland what size subwoofer do you have

[@ClintHolland]

I have an 8" Kicker. See my other video on which one I used. kzbin.info/www/bejne/b2mwdoaEm8yfbrM

[@barryhall2498]

I changed my cup holder with one I purchased on E-bay. After installing it. it will not open. Did I do something wrong? Please give me your thoughts . Thanks Barry

[@ArtIV]

Does this also work on a 2003 Lexus ES300? My passenger side front cup holder snapped so I need it replaced.

[@ClintHolland]

It's not the same unfortunately. They changed it up a little after 2001.

[@juangarcia-xs1yw]

I have that car lexus es300 and i found the two holder plastic whiskers looking the ones that pop out when the cup holders are opened and do u think i can replace just those

[@ClintHolland]

If you could find replacements I think you could replace them.

[@tmharrigan30]

juan garcia were you able to replace just the flimsy plastic arms that pop out? I know i was able to remove the broken one (but i forgot how i did it. I think b/c it was broken i just twisted it out but to put one back in may be a different story) do tell if it was easy!

[@TobyTatum]

@@ClintHolland Clint - thanks for the video. Do you know whether the two plastic arms/rings on the front cupholder assembly can "pop" back into place? The one on the right fell (or broke?) out and I've been fiddling with it to try to snap it back in. It doesn't appear broken (no sharp plastic edges anywhere) but I guess it could be missing a screw or something. Is it possible to snap it back into place? Do I just need to buy a new assembly? Thanks!

[@ClintHolland]

@@TobyTatum I am not going to say they can't, I am going to say this. I had the almost exact problem and after fighting with it for an hour I just bought a new entire cup holder assembly on Ebay. But patience is not my best quality.

[@devinmacedo4139]

Is this the same process for the 2004 Lexus ES330? Looks different on the rear side of the center console AC for removal so that I can replace my front cupholders

[@ClintHolland]

Unfortunately not. They changed them in 2002.

[@thecosmicgamer4586]

Can you do a video on replacing the lights on the exterior of the car?

[@ClintHolland]

I sure can. Let me add that to my list of requested videos. Thanks for reaching out.

[@julieebers152]

I am stuck at the part where you remove the rear cup holder. It won’t lift out like yours did. I am pulling pretty hard but I don’t want to break it. Any recommendations?

[@ClintHolland]

So what you don't see in this video is how hard I had to pull on it to get it out the first time. Be careful but I noticed that some of the metal had rusted behind it and it was really tough to get out. Maybe shoot it with some WD-40.

[@julieebers152]

Thanks! I was actually able to get my neighbor to help me. He works on cars a lot and found another to do it to where we didn’t need to remove the rear cup holder. But I bet it was rusted and that’s why I couldn’t get it out.

[@platinumencasedpenile4812]

Is there an aftermarket set of cupholders that dont suck

[@ClintHolland]

Not that I know of. The OEM ones are hard enough to find.

[@romanoorlando7041]

Clint - is it the same procedure on the 2002 ES 300?

[@ClintHolland]

I don't think so. I believe Lexus changed the design from 2001 to 2002.

[@silverbug2155]

Is it the same for 97 Avalon front cup holder?

[@ClintHolland]

Not identically the same but very close. You should be able to use this video to accomplish it.

[@emilynettles7639]

Where can I get the replacement part from?the cup holder itself I have but the thin plastic part that moves when you open it is missing and I don’t know where to get that piece from

[@ClintHolland]

Check Ebay and if you can't find anything you are probably going to have to go to a salvage yard.

[@johniannitti]

Can you please shoe how to change an IGNITION SWICTH on a 2002 es300..i know it is behind the panel and it is connect to the back of the key cylinder , it is only 2 screws and a clip, but i do not know how to get to it Thanks

[@ClintHolland]

Unfortunately I don't have this car to produce a video on that. However, if you visit www.eautorepair.net, you can actually buy the factory service manual on how to replace the ignition. That's how I figure out many of the videos I post to my channel.

[@theresascott8201]

Could you try to show me how to replace a 2008 Toyota Corolla rear cup holder? I have looked everywhere for a video and cannot find one. I would appreciate it.

[@ClintHolland]

I wish I could help but I don't have a Toyota Corolla or similar car to help with. Maybe someone else on here can.

[@martinjimenez7392]

It would be really cool to see if you could find a way to upgrade the front cupholders they are fine for what they are but they can’t hold a modern day water bottle without it falling out every turn.

[@ClintHolland]

Agreed. I feel like a lot of cars are that way. I know Weathertech and several others make adapters to let you put bigger glasses or bottles into the smaller cup holders.

[@jamescrock2213]

@@ClintHolland thank you. Been looking to switch mines out but even when they were good it was a sketchy holder

[@landonmiller3739]

where could i buy some replacement cup holders? got my 2000 es300 a year ago and i’m tired of not having cup holders

[@ClintHolland]

Ebay or a junk yard are probably your best bet. I got mine from Ebay.

[@elchinogaming3173]

How do you a-line the headlights on the Lexus es300 99

[@ClintHolland]

Not sure I understand the question. What do you mean?

[@elchinogaming3173]

@@ClintHolland I bought some new headlights on my Lexus es300 1999 and the light bulbs at night they don’t look straight

[@ClintHolland]

@@elchinogaming3173 What kind of headlights did you get? Most will only allow you to install them one way.

[@jayr650]

What do you replace the cup holders with?

[@ClintHolland]

What do you mean?

[@kileung6984]

THANK YOU , CAN YOU SHOW HOW TO REPLACE AN INTERIOR DOOR HANDLE

[@ClintHolland]

Take a look at this video and you will see how. kzbin.info/www/bejne/q2GskGqlhZqYjNk

[@jackiesmith9965]

Where can you purchase the replacement cup holder?

[@ClintHolland]

I got mine on Ebay. If not there, you would probably have to go to a salvage yard.

[@JS5074]

Is it possible to trade out the wood interior? I really want this car but the wood is holding me back.

[@ClintHolland]

I could be wrong but I don't think it comes with any options but the wood interior.

[@anthonyrivera7915]

bigpancho28 you could vinyl wrap it

[@jasonphilpot743]

How do u take the whole thing from the front to the back

[@ClintHolland]

Not sure I understand the question.

[@treyhunt9692]

Thanks Clint. ES330 the same way ?

[@ClintHolland]

If it's in the same year range, then yes.

[@hammertime4257]

Es330 2004. How to

[@elizabethgresham9873]

Can you show us how to disconnect the drawer in the Front

[@JackMeyHoffer562]

Anyone have a link to the replacement parts? Aftermarket preferred since I'm sure it'll be cheaper

[@ClintHolland]

Doubt you will find them. I found this one on Ebay. That or a junk yard are probably your best bets with a vehicle this old.

[@robertcuba297]

My 2002 ES has rear a/c vents, not cup holders. Taking out the vents did not provide access to the bolts.

[@jesusgonzalez-oh9ik]

👍👍👍👍👍😊

[@just_goose]

Anyone know where to buy a replacement?

[@ClintHolland]

I got mine from Ebay.

[@urvishpatel6238]

Can you please make an video how to remove Cigarette charging part in Lexus ES 300 1998 .....

[@ClintHolland]

Which one are you referring to? The one in the ash tray or the one in the console?

[@blakelewis8547]

This works for an 05?

[@ClintHolland]

I honestly don't know. Lexus changed this model in 02 so this may or may not work. Sorry, wish I were more help.

[@blakelewis8547]

@@ClintHolland ty

[@LisaKate2010]

I have a '97 Toyota Avalon, which, I'm guessing, came out about the time these Lexus' started because it looks just like this. Unfortunately, the reason I was watching was to figure out how to get something out of that console, which slipped in from laying on top of the front cup holder. I'm now guessing that it is probably gone permanently... I cannot tell, from this video, where it might have dropped to. (The transmission?) :::sigh:::

[@ClintHolland]

I might be wrong but I don't believe it could have fallen completely out. It's probably stuck down in some crevice but I doubt it is gone.

[@nathanielschroeder1321]

Replace the seat warmers please? Also put the seats back together well.

[@ClintHolland]

Sorry but mine doesn't have seat warmers to replace.

[@nathanielschroeder1321]

@@ClintHolland You can come fix mine! I'll hold the camera and pay for parts :)

[@sherylnfennjohnnyh.leefenn2055]

I Need To Get Lexus ES300 Cup Holders.

[@ClintHolland]

Your best bet will probably be a salvage yard or check Ebay.

[@AyeTine215]

That’s The Only Con I Have Wit My Lexus. Those Flemsy Ass Cup Holders

[@ClintHolland]

Way too easy to break. I agree.

[@tmharrigan30]

I know, wtf Lexus?!

[@tomacwoody]

Do not remove the bottom bolts at the 2 minute mark, they are not needed to remove the center console. All you need are the 2 screws at the front under the faux wood panel, and 2 bolts under the felt cover inside the center console. You can still replace both cup holders, but removing the 2 bottom bolts are an unnecessary step.

[@ClintHolland]

Great point Tomac. Someone else had already mentioned that and it's actually the top, pinned comment.

[@sunnysingh8483]

I thought you upgrade the cup holders lol. I hate these cup holders

[@ClintHolland]

I wish there were some better aftermarket ones. Totally agree with you.

[@hablemosdeautos2429]

Gracias 🙏 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@hablemosdeautos2429]

👍🏻👍🏻