How To Replace The Light Bulbs In Your 1999-2002 Silverado or SUV Power Window Switch

Рет қаралды 21,179

Күн бұрын

================================
Get your bulbs here.....carradiobulbs....
BELOW IS A LINK TO ALL OF THE PRODUCTS THAT I USE IN THE VIDEO.
Isopropyl Alcohol 99%
amzn.to/37XBA7j
Solder Wick
amzn.to/3wypBp7
Kester Solder
amzn.to/3wrE73h
100 pcs Foam Tip Cleaning Swabs
amzn.to/3PuFuFz
Chipquik Tack Flux/solder paste
amzn.to/3wqcpnr
100 pcs 2.75" Small Head Foam Tip Cleaning Swab Lint Free
amzn.to/3sKnBsC
Stickvise PCB Vise with Standard Nylon Jaws
amzn.to/3a331gF
DC Power Supply Adjustable (30V 10A)
amzn.to/380uQFS
HAKKO desoldering iron
amzn.to/3My1m11
Hakko FX888D-23BY Digital Soldering Station
amzn.to/37Wr3cu
Anti Static Insulation Silicone Soldering Mat Heat Resistant
amzn.to/3PHeL9d
Adjustable Circuit Board Holder
amzn.to/3Mxj8By

Пікірлер: 23

@sergeygruzdev980 9 ай бұрын

I've Tahoe from 2000. Great video, thanks! A small addition to this video: I did not cut off the bulbs, I carefully drilled two holes (one for each 💡) on the back side and got access to work with a soldering iron. The hole is about 7 mm, as you'll feel to get a comfortable access.

@tonydeleon6059 4 жыл бұрын

Can you do a video on replacing window switches on led lights on a 2006 Chevy 1500

@itsDGAF 3 жыл бұрын

Can you do an 03-07 window switch?

@sergeygruzdev980 9 ай бұрын

It is important for those who wants to put a bright light leds instead of incandescent lamps. Firstly you need to find the electrics "+" track. The plus (+) one is the path that goes from the center (under the 💡) of the board to the edge of the board. This is true for two locations of 💡bulbs and tracks. And it will be much more lighter in the case if you'll use leds. I did it with the green 🟢 leds and it's really great! If you'll change the bulb💡of the mirror switch, the "+' line is the line ➖ with just two 2⃣ contacts. One contact is next to the bulb and another one is the othe side of this line. That's it.

@EALeathers 3 жыл бұрын

Hi I have a 2002 Cadillac Escalade and one rear window switch light has burned out. I took the cover off and instead of blue covered lights, I have tiny clear incandescent bulbs soldered in, there's a blue rubber cover over the whole board. Do you have info or a kit for rear window switch lights?

@tellitallnow3914 2 жыл бұрын

Is there a positive side and a negative? Thanks for the video!!

@Car-Radio-Bulbs 2 жыл бұрын

no not with incandescent bulbs.

@sergeygruzdev980 9 ай бұрын

Check for the answer my comment, under the video.

@_l8075 3 жыл бұрын

Distracted by that great work mat. Where do I find one of those?!

@Car-Radio-Bulbs 3 жыл бұрын

Anti Static Insulation Silicone Soldering Mat Heat Resistant amzn.to/3PHeL9d

@juansmusclecars 4 жыл бұрын

You replace those light bulbs like a professional

@sergeygruzdev980 8 ай бұрын

I do think that this guy did it better then the "pro" one. Because the pro man refused to do it under condition that there around no access to work with. But this guy just did it ))) There are always chance if your're really wanna to try) . Well 👍 done! 🤘 And shame for the GM guy who refused.