How to replace the oil pressure sensor on a Cummins ISM | ISX engine

[@Uc9uE3pKsS6uQ]

today I try to unscrew mine (six 2016 its on the cyl6 end) very bad location. I remove the connector but my tool lose, can not unscrew some replace this before me and overtighten now what ? :(

[@Son0fLib3rty]

Hey yall i got a 2001 cummins ISM. The oil starts out at 65 psi then drops into the teens after warming up and it drops at the filter head Ive ruled out pump, guage, leaks, injectors, jakes while everything on the valve train looks good. I had a 12 hour diagnostic that ensured the internals had normal ware. I recently had the injectors in cylinder 2 replaced as well as a rocker arm on the same cylinder replaced. I used the truck for two days and had to bring it back to the same shop. The mechanic informed me that there was a wire broken on the number 2 jake assembly. And now insists that it wasnt from the work they did but dosent know whats wrong with it please any suggestions will be greatly appreciated

[@123yeloguy]

The only thing u nesd was some long needle nose plyers to remkve the pig tail whilnit was still on engine

[@tti4919]

Keep rolling

[@goaltransit1174]

what truck does before you change sansor

[@lisalipscomb7917]

Where was it located?

[@rizzle8762]

What's with the warn engine notification on the dash?

[@thetransporterboss]

I believe that was a warming for low coolant, its leaking a bit of coolant but its got nothing to do with the sensor. Thanks for the question.

[@goaltransit1174]

@@thetransporterboss So warning was Coolant and you changed oil why ?

[@ahmadsuliman7739]

There was a lock you slide on the top of the connector to press to release the sensor 🙄

[@danny4696]

What happened to the Maxxforce?

[@thetransporterboss]

Good question, I just uploaded a Q&A video and answered your question there.

[@kimberlyconnolly8294]

Explain what "funny things" are... good but could have been more informative such as my oil gage pressure jumped from 40 -80 psi.. and what the effect was while driving..

[@thetransporterboss]

Thank you for pointing that out. In the description area located below the video i have the link to the symptoms video and it shows how the truck was behaving, i also left the link on the suggestions on the top side of the video when i mention it at 0:25 Here is the link to the video as well: kzbin.info/www/bejne/faWTe5JsrauMbck