How to Replace Timing Belt 01-05 Volvo V70

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@ricardoaguilar7562]

Great video the best out there

[@joewarski9346]

is the belt directional ?

[@randyrobison335]

Thanks for the video. Me and my 16 year old daughter just used it to change out our 2002 V70 2.4T timing belt. Successfully and efficiently. Took 4 hours.

[@SingingXavier]

Great video - thank you very much. I did it yesterday and it took me 2 1/2 hours, following your detailed instructions. I really appreciate you listing the tools needed. It was pretty smooth - the worst part was cracking loose the over-torqued wheel nuts from the tire installers impact wrench!

[@TonySims888]

This is a great demonstration of the basic process for the timing belt. Generally, you should take the extra steps of replacing the oil pump gasket and o-ring, the front crank seal, and the water pump. It's a false economy to skip these items. Also, if you choose to replace the cam seals, know that the adjustable cam pulley has an o-ring in it that is a common failure. The pulley is not inexpensive, but if the o-ring leaks oil will end up on the timing belt. No bueno.

[@TonySims888]

Also, the adjustable cam pulley(s) can move, and the oil pressure can bleed off the cam position solenoid and the cam can move in relation to the adjustable pulley. There are locking tools that go in the other end of the head to hold the cams. If they move on you, expensive things make contact. Again, no bueno.

[@TonySims888]

Sorry, to be clear -- not criticizing this video, just pointing out some things I recommend, having replaced many of these Volvo timing belts.

[@1AAuto]

Thanks for the feedback and for watching! +Tony Sims

[@franciscopeirat8395]

SO clean, so perfectly explained, so amazingly filmed, so immaculately done. I just go t a 2002 Volvo V70 and Sir, congratulations!!

[@ProtoFalcon07]

Got this, and the water pump done on my 2001 non-turbo, which was almost 40K overdue---first timing belt job ever, and took me over 7 hours. The old belt looked good, but the pulleys were definitely going; a good amount of grease was coming out of those bearings. My near-245K S60 is definitely happier. This video especially helped with the tensioner pulley segment. Thanks!

[@1AAuto]

+Blue Falcon Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/TimingBelts/Volvo/V70/1ATBK00041?KZbin&CTA+Comment&Emsa-w-n93s

[@markuswinkler3114]

I really did enjoy your well made tutorial. I have one ammendment: in Volvo Vidas workshop manual the 3 positions of the belt tensioner stand for: cold-minus 20C, warm-20C, hot-50C ambient temperature. So it is best to set it to the middle position with a cold engine instead of the cold position. otherwise the tension applied will be too much.

[@clstrife1]

Why does it seem like NO ONE knows this?

[@larsostli]

Thank you for this comment! Almost went for the -20C setting...

[@cyrilevo-quang1754]

You guys are amazing. I am going to do a timing belt/water pump job today...have watched a few of your Volvo timing belt jobs and am now confident that it should go fairly smoothly... Thanks guys!

[@1AAuto]

+Cyrile Vo-Quang Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@cyrilevo-quang1754]

+1A Auto Parts Went well. You might want to mention that on some cars, there is a cap covering the tensioner bolt head on the serpentine belt. I was stumped until I jacked the car overhead and saw that it's just a pressure fit cap. Otherwise your instructions were superbly detailed! Good on you! I do have an engine light on, I'm figuring it has to do with coolant level (I changed the water pump too so I believe the car is still burping itself.) If not, what could be the culprit? And how do I turn off the "Time for Regular Maintenance" message? (I tried the method in your other video but it didn't seem to work...)

[@spelunkerd]

It's great to see you guys dive into a more complicated repair, like this one. Thanks!

[@MartinKrijgsmanMusic]

Thank you. You saved me 800 euro's; about a 1000 dollars worth of labor. Excellent video.

[@RichieRouge206]

What a superb video! I'm in the UK and just bought a 98 V70 2.5 20v, I shall be doing this when the weather gets warmer, nowhere near as bad as I imagined :D Thank you for such an informative video - makes owning one of these lovely cars even easier!

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@joseangelgalan7335]

Great video. I spent two days trying to put off the big nut. With your video I change the belt in few hours, thank you very much.

[@1AAuto]

+Jose Angel Galán Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/TimingBelts/Volvo/V70/1ATBK00041?KZbin&CTA+Comment&Emsa-w-n93s

[@benedwards4435]

Just wanted to thank you for taking the time to produce this - tackled the timing belt on my brother's 2.4 at the weekend and all went smoothly thanks to this very helpful vid. Cheers.!

[@1AAuto]

+Ben Edwards Thank you!

[@nestordupo845]

The best tutorial video I've ever watch now I can change the timing belt of my s60 2000 model. Thank you for sharing.

[@billmac4597]

Great tech help on this video. Gave me confidence to give it a try and saved me big $$$. Part kit came with belt, idler and tensioner, and water pump...@ $200. Cost me a Saturday afternoon, a little patience required to re-install belt, and was done. Best shop quote I got was $750 one was over $900! Thank you and my wallet thanks you!

[@1AAuto]

You’re welcome! We’re happy to help and thanks for watching 1aauto.com 866-403-3393

[@patrickjansen8608]

Great video, used it yesterday and it works perfect. My volvo xc 70 is now ready to go over 500k. waterpunp also replaced. thanks1AAuto

[@ScottHz]

Glad to see he had as much trouble positioning the timing belt cover as I was having!

[@1AAuto]

+Scott Hertzog Yeah, sometimes car stuff calls for a bit of perseverance, but it's worth it if you keep at it. 1aauto.com 866-403-3393

[@cityboyfarmer7396]

This video was great, I followed and got the job done with no hitches. I went ahead and changed out the water pump while I had it apart.

[@1AAuto]

+Donald Alcus Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@johnferguson7235]

On my 2.5L T2 I've been told to always change the water pump with the belt? What is your opinion or your experience? Why not remove and inspect the spark plugs? It makes it so much easier to tun the crank.

[@squatniffkola-bulle6865]

3 yrs no answer

[@chuckrichey9260]

Thank you for the great video. One of the first steps to completing this job is to remove the serpentine belt. For those Volvo owners that have a 2006 Volvo or older you just need a 14mm socket wrench or long-handled 14mm wrench to 'de-tension' the serpentine belt pulley in order to remove and install the serpentine belt. Starting with the 2007 model year XC70, Volvo engineers "designed-away" the simple 14mm fitting for the serpentine belt pulley tensioner. They "designed-in" a new T-60 Torx fitting into the serpentine belt pulley tensioner. 2007 model year and newer owners will need to buy a specialized tool for about $30. This will allow for them to remove and install the serpentine belt. Also, excellent advice to not remove the serpentine belt crankcase pulley (SBCP.) If you leave the SBCP in place it's more difficult to get the timing belt onto the crankcase timing belt gears but it's well worth the extra work. I worked from underneath the car while another mechanic worked from above and thru a push, pull and belt bending technique we were able to route the new timing belt onto the crankcase gear perfectly. Don't remove the SBCP unless you have the specialized tool that stabilizes the oscillation damper that's integrated into the SBCP.

[@inspirationtoday7550]

Glad to see more professionals showing the job being done without taking off that crank hub . outside of the shop , I don't think its coming off for most people anyway.

[@raydice8743]

Have seen a lot of UTube auo repairs- this is by far one of the best (including the other A1Auto ones,lol)

[@1AAuto]

If any of our viewers need to make this repair we carry the timing belt shown in this video on our website. Here's a link to them, we also offer free shipping on all orders in the US www.1aauto.com/volvo-timing-belt-kit/i/1atbk00041?KZbin&CTA%20Comment&ATony

[@pherchs20]

Great job... do you know what are the torque specs for the idler, tensioner, and water pump bolt? Thank you

[@josecerv4452]

Thank you for your patience to show us the steps to change the timing belt. appreciated, one question, if timing belt breaks out, is it possible to get damaged cylinder head valves?

[@Jacko5340]

Very good Video Thanks for sharing. I could not see any timing marks on the lower gear as I was looking in the wrong place.Thanks for just a little advertising and being a real tech.

[@legion6277]

Before buttoning it all up,and with any timing belt change,make sure to turn the engine over by hand a couple of times and check that the timing marks come back in sequence....if you do this it may save you a lot of work,if you don't and something isn't right you could have to do it all over at the least and at the worst you could bend the valves and...well you know👍

[@1AAuto]

Thanks for the comments and for watching! +Legion

[@nineeightfourlawrence8474]

Thanks so much. Saved me $500 by doing it myself.

[@1AAuto]

+nineeightfour lawrence Thats what we love to hear! If you have a minute, drop us a review on our Facebook page to let other people know about your experience with us. Here's a link: facebook.com/1AAuto/reviews/

[@djbit2007]

I bought your timing kit for my 2003 XC90T6. Going to install it along with the water pump this weekend. Wish me luck!

[@1AAuto]

Thank you for your order Alex. Have a great holiday season. 1aauto.com 866-403-3393

[@dawnrobbins5877]

Thanks! I learned enough by watching this video to know I will have to pay a professional to do it. 😉

[@rebeltango]

Dawn, before you decide to go to a garage, take a look at the FCP Euro vid on P2 timing belts. This is my first big piece of maintenance and between these two videos I found it totally doable. (I even replaced the water pump as well!)

[@dawnrobbins5877]

@@rebeltango I will! Thanks!

[@vogeltron9816]

Great video if you watch this in conjunction with the FCP Euro Video I think one doing this job will understand everything completely!!!

[@rebeltango]

agreed! i was trying to go off the FCP euro vid exclusively, and it's very well done, but this one covers important info on the tensioner in way more detail! (and the screwdriver trick is a huge help)

[@ckbikes]

Great video. I'm doing the job along with the water pump replacement and watching and installing as I go. Sure wish you would have provided toque specs as you reinstalled items though!

[@1AAuto]

+Jay Wright Thanks for the tip! We'll pass this info along to our production team.

[@jamesthomas323]

Thanks u...this video was very informative n knowledgeable...noticed there were no marks on the timing belt

[@patrioticoath1376]

Wouldn't the "1 revolution" you mentioned actually be 4 complete revolutions of the Crank Pulley, in order for the timing marks to be lined up? excellent video; very informative

[@veryvariedsteve]

Thanks for this. Great video. I managed to do a belt change pretty easily where before seeing your video thought it was impossible

[@1AAuto]

+the Machine the Fool and Us Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@Woodworker1947]

Looks good! - will be attempting my own replacement soon based on this video so this is a great help! Best wishes!

[@1AAuto]

John Ward Thanks for watching 1aauto.com 866-403-3393

[@ramonaquino6521]

Timing Belt,Tensioner,Idler. (NO WATERPUMP)"WOW" Very Effective For MilesTo Come

[@Peppermint1]

+RAMÓN AQUINO We only replace the original water pump on the second timing belt on this vehicle. Original Volvo water pump will last 300000km (200000miles). This is also Volvo recommendation.

[@stevehumphrey4438]

Water pumps on these Volvos are know to go thru to 2nd belt change. My indy shop doesn't recommend doing automatically. I assume the vehicle is not high mileage.

[@nihonkokusai]

@@stevehumphrey4438 sometimes the gasket will leak due low mileage so needed to replace then

[@Dasdembo]

Good work! But in 2 weeks he's back for water pump change! We always recommend w.pump change! But it's up to the owner to decide!

[@1AAuto]

+BO4wd Thanks for checking us out. 1AAuto.com

[@Kosar_OnTheCreek]

Guys great video, where is the post that comes down to line up the crankshaft? Is it that little, as you call it "post" that is molded on the L shaped thing on the oil pump?

[@1AAuto]

+John Kosar Thank you for checking us out. The post should be the L shaped piece on the oil pump which lines up to the crankshaft. 1aauto.com

[@sandropizza8664]

Do you have any instruction for how to timing the pulley and camshaft for intake system? If I need to replace the seal of camshaft pulley. Thank you in advance.

[@nihonkokusai]

Use cam blocking tools on the other side of the engine

[@jonathanbriggs4793]

Great video...took me about 4 hrs start to finish...of course stopping to watch video every 5 minutes!!! Make sure to check your engine serial number tho there are 2 different belts for this engine....THANKS!!

[@duckthis17]

Is this the same procedure for an 2001 v70 turbo? What brand do you carry that is recomended.I feel I should buy from you since you posted the how to on doing the job,I don't care if it cost me a little more.

[@1AAuto]

+Nunofyour beesiness Yep, that's the beauty of these engines, so many of the parts are interchangeable between models. We offer Gates -- really high quality. In all likelihood, you'll probably save the most money buying from us. And you're going to get the highest quality parts. As a tip, we always recommend replacing the water pump at the same time. Here's a link to a timing belt, tensions, and water pump kit from our website! Remember, we always ship to your door for free. Thanks for checking us out :) www.1aauto.com/volvo-timing-belt-kit-with-water-pump-gates-tckwp331/i/gaeek00028?f=481893&y=2002&KZbin&CTA%20Comment&ATony

[@marianluc6235]

Gates is decent, sks is better quality for this engines .I hope 1 a auto carries that.

[@1AAuto]

+Nunofyour beesiness We carry a Gates kit as well as an economy kit. Here is a link to them on our website. Hope this helps you out www.1aauto.com/2001-volvo-v70-timing-belts/y-mo-c/2001-569-110?KZbin&CTA%20Comment&ATony

[@todefy7314]

Easy peezy. Did one on a 2002 V70XC. Runs great. Then I was told not to do those without a camshaft locking tool. Now I have to do one on a 2006 V70 and I'm nervous because it's all in my head that I could screw it up. Thoughts on locking the cams together?

[@wdavis967]

I'm loving that big Pontiac neon sign over the double door.

[@1AAuto]

+W Davis Us too, big Pontiac fans over here! 1aauto.com

[@Peppermint1]

Don't you have to turn the belt a full turn clockwise before adjusting the tensioner, so the belt gets pretensioned by the exhaust camshaft pulley?

[@ashleyleonard673]

No... If you turn the belt without tensioning the belt will slip and timing will be out

[@msullivan9565]

What if you can't get teeth to align for proper belt tension and have to change position of pulley and the timing looks slightly off cover marks, how precise must timing be?

[@legion6277]

Some models of the Volvo have a plastic nipple that comes from the thermostat housing,sticks out of the timing cover and goes to the coolant expansion tank....that nipple is cheap plastic and usually snaps off if you ever touch it...if you ever have to replace it ,use a metal aftermarket one and cut off the quick connect and go with a regular clamp...Volvo will not sell the nipple without a whole new thermostat housing for $200 so be aware

[@1AAuto]

Thanks for the comments and for watching! +Legion

[@legion6277]

@@1AAuto You're welcome and you guys are great,excellent channel and very informative👍

[@audio131]

How did they magically get that belt off without taking off the crank pulley assembly?

[@1AAuto]

The full instructions are written out on the website that will follow the video. Thanks for the comments! +audio131

[@rawz8936]

Does somebody have a link to do it on a t5 ?

[@notny411]

Thanks for the video! Is there any difference in proceedure between this car and a 2006 S60 AWD turbo?

[@1AAuto]

+notny411 It may be the same procedure on that vehicle

[@danstrausbaugh6430]

You should consider using a laser pointer when showing critical information

[@1AAuto]

Thank you for the suggestion and viewing our video! +Dan Strausbaugh

[@georgefullbattery9085]

I appreciate your time. I have tried to change it but there were no marks whatsoever on the gears. what do you advise? thx

[@1AAuto]

+Arben Vuthi That does not sound right. Without those markings it is virtually impossible to do the timing. They are going to be very small, so maybe you are having a hard time seeing them? If you cannot locate those marks then you will most likely have to take the vehicle to a Volvo dealership to have this service performed.

[@stephenlnoe]

Thanks for the video. So useful. Q: Would it be easier to pull the airbox out? Seems like it would help too.

[@AnythingGasoline]

Right, so what did you use to lock the cams in place? Major part of info missing from the video..

[@kirkflorida]

Both Serpentine and Timing Belt did not go back on as easy as you made it look. Any additional tips would be appreciated. What finally worked for me is regarding the timing belt was fitting it on everything except the idler and then taking the tension off and sliding it over the idler roller. At 11:21 that is what you appear to be doing, please confirm. With the serpentine belt I do not have a Volvo specific tool but used another serpentine belt tool and still had difficulty getting enough slack to pull the belt over the power steering pulley. I finally used a ratchet but it required a second person to help me out. Thank you for the video.

[@shannonmccarthyleone2737]

Another great video from 1A! I've learned a lot from your videos, for instance, this is one repair I wont be trying. Too bad Volvo did not use a timing chain.

[@bridgettfogle6746]

You have been the most helpful for the aggravation from my 2000 Volvo s80 2.9l non turbo. I have to replace the radiator and fan. The thermostat is bad I think. I had replaced the radiator due to a crack in it.. well 2 days later the new one cracked same spot. The car never runs hot the gauge never goes over half way Mark. But I do have questions about electrical issues.. is there a way I can contact you and maybe ask advice

[@1AAuto]

+Bridgett Fogle You may want to check the warranty on the radiator. If it was a part that you have purchased form us we carry a lifetime warranty on there. Here is a link to the radiator that we carry for your vehicle. Hope this helps you out goo.gl/eYXJzL

[@geraldspeis3622]

best i have found so far

[@1AAuto]

+Gerald Speis Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/TimingBelts/Volvo/V70/1ATBK00041?KZbin&CTA+Comment&Emsa-w-n93s

[@emanuel4491]

Great work on this video. They're a big help for those of us who have these cars and are thinking of tackling these repairs. Any chance of doing one on the control arm bushing replacement. They're a notorious weak point and an apparently difficult job on these P2 chassis Volvos.

[@1AAuto]

Thank you for watching! 888-844-3393

[@princedabby8414]

excellent video, but my question is this what if the timing belt is completely warn-out, so how am i going to set the cam thanks

[@todddavis6802]

Thank you Don at 1a auto for helping me with my 2002 Volvo v70. Can you do a video on how to replace the PVC system for these cars? Thanks!

[@1AAuto]

+Todd Davis Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?KZbin&CTA%20Comment& 866-403-3393

[@francoismorin6806]

11:05 when you put the new belt like this how can you be sure that your are no adding or skipping 1 teeth ?

[@N.D.J.S.]

i have a question. what is with the right gear?? when i put the belt on. do i have it to turn right or have it to losen . i mean , i can move it a little bit from right to left. in which position does the wheel have to be in? greets...

[@HighwayStar70]

I want my S70 back...somebody hit me and they totaled it...Great video also...I love your auto parts too.

[@1AAuto]

+DOsborne Thanks for checking us out! We are sorry to hear that, that is definitely a tough way to lose a vehicle. Perhaps another S70 will be in your future given how much you liked it. 1aau.to/m/Shop-1AAuto-c

[@Rockell479]

Do you need the timing cover to time the Cam pulleys? or do they just need to be timed to 12 O'clock?

[@bullitt773]

Do you know of any videos on doing this on the 2.5L Turbo engine?

[@fatdudeintx5135]

Thanks so much for making this video! Very helpful. Please keep up the good work!!

[@1AAuto]

Thank you for watching! 1aauto.com 888-844-3393

[@KiLl3rXxXBuNnEh]

thank you sooo much this is THE most helpful video there is espcially the tip about the crank markings

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@jth1987leb]

Why didn’t you replace the water pump and is the crank to cam 1:1 or 2:1?

[@riprob93]

Is this the same process for a 2004 S60 2.5T AWD?

[@jewhi8535]

The video mentions this is for non-turbo engines. Is there a video for a 2.4T engine, or what would be different between turbo and non-turbo?

[@yuwuyang123456]

Thank you! ~ I learned a lot ! ~ If oil seal replacement teaching will be even better !

[@1AAuto]

Thank you for watching! Glad to be of help. Let us know how the repair turns out. 1aauto.com 888-844-3393

[@mikebones322]

Thanks for video, but when does VOLVO recommend replacing the belt and pulleys? I just picked up an '05 V50 2.4L.

[@andreaspalm7245]

Does this also work on a V70 (II) turbo model 00? Or will the turbo cause trouble?

[@halleffect1]

thank you for showing this.

[@catvisimo]

This is a great, explicit video on Timing belt replace diy, i just wanted to ask you at what position should i put the belt tensioner ? if my engine is cold (did not start it for 3 days), at the cold position ? or at the warm position ? just as a reference the outside temperature is 25c/77f. Hope to hear from you soon Thank you and keep it up !

[@volvo-lover]

Big like to show us how to change timing belt but also big dislike to not change the water pump

[@Peppermint1]

10:12 that part there is actually quite tricky. He's very used to it so he goes fast, but it's not that easy, many points where is really tight. Be sure not to twist the belt too much - it can crack the composite fibers kzbin.info/www/bejne/aKXPm6ulhqt3m5I The tensioner is different on 2001-mid2004 and on mid2004-up (center bolt torque 15ft-lbs)

[@mainecoon6122]

How long would it take a experienced mechanic approximately to replace timing+multibelt including rollers and waterpump on a B5244T3?

[@rtfdxn]

I'm having a very difficult time putting the belt back on. Any tips?

[@gmaclan08]

Which belt serpentine or timing belt

[@carloslebaron]

In other cars you need a special tool to hold the camshafts so they won't move and keep aligned with the set marks. I didn't see this part of the process in the video. Is Volvo engine different in this aspect? Do I need something to hold the camshafts in place "just in case"?

[@BillieGuitar91]

Why you didn't change the waterpump also ?

[@1AAuto]

+Track_FRS2 This video was just showing the timing belt replacement. Generally it is good practice to change the water pump as well when doing the timing belt.

[@UncleBob247]

Loving how everyone is moaning about water pump, official Volvo workshop manual has 2 different spec changes for timing belt 60 - 80k is timing belts and both tensioners 135 - 155k is timing belt, tensioners and water pump along with a bunch of oil seals and pipes

[@nihonkokusai]

I have one that lasts 200k miles now just replaced it now. No leaks bit of play on the axle.

[@gardnerhatch5982]

Is this the same procedure for a turbo model P2? (2006 S60 2.5t)

[@1AAuto]

+Gardner Hatch It should be the same procedure. Here is a link to the timing belt kit that we carry for your year, make and model. Hope this helps you out. www.1aauto.com/2006-volvo-s60-timing-belts/y-mo-c/2006-1077-110?KZbin&CTA%20Comment&

[@gardnerhatch5982]

1A Auto Parts I plan on ordering it this week. Thanks!

[@djbit2007]

I take it the process is the same for a 2003 XC90 T6? Excellent vids by the way!

[@malcolmparkins1935]

I'm guessing this is much more involved on the turbo version?

[@GodIsADelusion]

Nah turbo is on the other side of the engine

[@jeffirem1332]

please can u post a video about how to set the camshaft on a volvo xc90 2002 model.@1aauto

[@1AAuto]

+jeff irem We'll keep this request in mind in the event that we need to make this repair in the future 1aauto.com

[@Vikingdescendent]

Excellent job! Thx for posting. How long did it actually take you and how long if you change the water pump too?

[@1AAuto]

+Vikingdescendent If may take you a few hours to do the repair. If you have a service manual for the vehicle it may state how many hours it should take. If any of our viewers need to make this repair we carry the timing belt kit shown in this video on our website. Here's a link to them www.1aauto.com?KZbin&CTA%20Comment&ATony

[@davidkozlowski6982]

I see the vvt is on intake side. My 99 XC70 is on exhaust side. Don't you have to advance the vvt full clockwise when putting belt on?

[@shawnmarzullo5988]

Is this the same procedure for a 2007 Volvo v70 cross country

[@1AAuto]

+Shawn Marzullo It should be the same procedure. Here is a link to the timing belts that we carry for your vehicle, and also the auto repair videos that go with them. Hope this helps you out goo.gl/gE4cC8

[@adamthestimator]

How much different is doing this for a 2000 V70 2.4L (non-turbo)?

[@1AAuto]

Other than any turbo components that may be in the way, it should may be a similar or the same procedure. Hope this helps you out. Have a great day! 1aauto.com 866-403-3393

[@adamthestimator]

1A Auto Parts Thanks for the quick response! I'll let you know how it goes..

[@Peppermint1]

It is the same. I would also put away the coolant reservoir to get more space. Passing the new belt at 10:20 looks easy, but I found it to be quite fiddling.

[@angelsdontsleepwalton936]

You are so right between the 2 you can do it.

[@tundezzzstargatekommunicat6112]

TANX FOR SHARING THE KNOWLEDGE ABOUT TIMING BELT. DO YOU HAVE ANY INFORMATION ON PUTTING IN A NEW DASH BOARD FOR S80 2002 VOLVO, I WANT TO CHANGE THE DASH BOARD. YOUR GUIDE WILL BE HELPFULL RESPECTFULLY GR8 GRANDMASTER TAFARI

[@alexanderbordessa4784]

Hello Could you tell me if the engine on this car is the same as the 1999's V70 2,5i Automatic ? As i have just bought one and need to change the timing belt and this is why i watched your video!? Thank you for the video and the answer to my question!! cheers

[@punhoss]

aren't you supposed to do the water pump in conjunction with a timing belt?

[@1AAuto]

+punhoss Yes, you can replace the water pump while you are in these if it is old and has a lot of miles on it. Hope this helps you out. 1aauto.com

[@ox9218]

1A Auto Parts Do you have a video replacing the water pump?

[@nihonkokusai]

@@ox9218 see robert diy similar with the 850

[@1160youngmoney]

I have a Volvo s70 when I scanned it the cold. shows is Ecm 6440 reset valve camshaft Ecm 644a Tim self control Can you make a video and show me where the located. I really need your help

[@1AAuto]

Thank you for watching. Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. 1aauto.com 888-844-3393

[@1160youngmoney]

Ok thanks

[@rayoliver6807]

Do 4 turns for the cam lobes to completely flip intake/exhaust as you line up marks!!

[@cyrielgaemers]

Question; I see you have a VVT and you did not spin that one up? Why is that?

[@PiotrTester]

good video enriching - tests and opinions

[@1AAuto]

Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393

[@ronaldjoseph4425]

What I'd like to know. Does every mechanic preforming this know that it has to be done exactly like you did it??? I need that done on my car but I'm afraid to get a bad mechanic who doesn't do this the way you did it.. Who do I take my 2004 V70 to?

[@rebeltango]

look up indie shops that specialize in volvos, Ronald. Depending on where you are, there should be a few. Usually they also work on saabs and sometimes VW/BMW/Mercedes. You're better off with a european car specialist than any old mechanic, regardless.

[@Peppermint1]

Cam sprockets locking tool www.ipdusa.com/products/5127/109573-volvo-camshaft-locking-tool-ipd-109573-t850ct The original Volvo/Aisin pump can do 200,000 miles (or more) if using the right coolant. But many cars may have had the pump already replaced with a chinese one so look with a mirror for stamps like Aisin, GMB or Hepu (should be fine). You may also find inside a circle two digits - the year of manufacturing. All pumps have a small hole at the top, in case the bearing seal starts leaking, however even if it's not leaking a pump may still seize the bearing. While the belt if out, spin the pump by hand and feel it: if it spins very easily like you give it a kick and keeps spinning several times, it's getting worn, if it spins and feels like slight grabbing in some points, it's getting pretty worn, if it spins and feels like metal friction or slightly 'squeals' replace right away. A new pump will feel like it has 'grease' restriction when spinning, feels smooth and somehow 'heavy' to turn. The pump has 7 bolts, the rear ones cannot be reached with the socket, nor with the 3" extension. Try using a deep 10mm socket. Use some blue locktite on the water pump bolts to 13 ft-lb (17N-m). Tensioner center bolt torque to 15ft-lb (20N-m) - new tensioner model from mid 2004-on so look first at yours before ordering or check with the engine serial no on the side belt cover sticker. From 2004 on the serpentine tensioner may require a torx tool (see fcp site) blog.fcpeuro.com/replacing-the-water-pump-on-a-2001-volvo-s60-t5