How To Replace Valve Body And Shift Selenoid In A 2006 Dodge Dakota 4.7L Transmission | Part 2

#transmission #dakota #diy
I got the dreaded P0700 And P0770 which means I needed to change the valve body and shift selenoid in my transmission.
Since the procedure is kind of lengthy I divided this video into two parts. if you have any questions or comments please leave them in the comment section below.
Dodge / Chrysler / Jeep
45RFE Torque Specifications
DESCRIPTION NM FT/LBS
Cooler Line Fitting 17.5 13
Torque Converter Bolt 31 23
Drive Plate Bolt 75 55
Crossmember Bolt/Nut 68 50
Oil Pan Bolt 11.8 8.7
Primary Oil Filter 4.5 3.3
Cooler Return Filter 14 10.3
Oil Pump Bolt 28.2 20.8
Oil Pump Body to Cover Bolt 4.5 3.3
Plate to Oil Pump Body Screw 4.5 3.3
Pressure Test Port Plug 5.1 3.7
Reaction Shaft Support Bolt 11.8 8.7
Valve Body Bolt 11.8 8.7
Valve Body to Transfer Plate Screw 4.5 3.3
Accumulator Cover Screw 4.5 3.3
Solenoid Module to Transfer Plate Screw 5.7 4.2
Detent Sprint Screw 4.5 3.3
Input Speed Sensor Bolt 11.8 8.7
Output Speed Sensor Bolt 11.8 8.7
Line Pressure Sensor Bolt 11.8 8.7
Extension Housing Bolt 54 40
Vent Fitting 12 8.8
Manual Valve Cam Retaining Screw 4.5 3.3
Manual Lever Bolt 28.2 20.8
Please like and subscribe to the channel.
Support My Channel.
www.buymeacoff...
Buy Merch:
official-mr-go...
My Social Media:
Facebook: / mr.goody2018
Instagram: Mr.Goody2018
Twitch: gaming_with_goody
TikTok: vm.tiktok.com/...
Twitter: @MrGoody2018
Pinterest: @MrGoody2018
Reddit: u/Mr-Goody
Contact me at: [e-mail]
Send me your ideas for a video or any questions you may have.

[@thalaquatics8712]

I'm getting a p0706 and my prnd12 only lights certain gears sometimes, never lights park, doesn't light 2 until I go into 1 and yeah you get the picture. What do you think? Valve body and solenoid or just solenoid? I do still have to check voltage off the switch at the ecu to make sure it's not just the computer

[@Mr_Goody]

Also, be sure to check the body control module as it controls every electrical component in the truck. It is located on the back of the fuse box underneath the hood on the left on the driver side.

[@vandiverb]

06 durango seems comparable.

[@marcandrebellemare2880]

Merci!

[@Mr_Goody]

Thank You so much for the Super Thanks. I greatly appreciate it. 👍🤙

[@BIGGWANGG]

My truck says bad tcm and won't reverse but all other gears are good

[@Mr_Goody]

It’s really hard to determine if it’s actually a bad gear in the transmission but if you’re getting the error code that you have a bad transmission control module, I would definitely replace it.

[@marcandrebellemare2880]

WHERE YOU FIND ALL THE NEW PARTS FOR TRANS .THANK YOU

[@Mr_Goody]

You can find them brand new from Mopar online, but that is the most expensive way and I recommend a trustworthy seller on eBay or at your local junkyard. It is much cheaper and just as reliable. 👍

[@marcandrebellemare2880]

@@Mr_Goody where find the tools on your vidéo Dodge Dakota repaires selenoide

[@Mr_Goody]

@@marcandrebellemare2880 I got my tools from different places over the years, but I got my starter tool set at Amazon, let me see if I can find the link. l.facebook.com/l.php?u=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB07MXB85S3%3Fref%3Dppx_pop_mob_ap_share%26fbclid%3DIwAR32OzrUs-vuBLrHS1cBEIa8oc9R_SbrrP_BEW4Gg62MxQyR4aLZ2oUnMTQ&h=AT04IyETgDYUx6hBw1_dzMym1Oyc2jAmpphcDbWpHjsNoct73W3jU421-ltyzklrApDHcHv50skUL_kASgBEXZacAxisCt0M3taOnZqFDGVZdlbs0XjsQ2NsP1V-adOWmBzLlA

[@Mr_Goody]

If you need anymore help just click on my instagram link on my channel banner and I can try to help you more.

[@StevenHanover]

Is this good for p0760 Overdrive shift solenoid for 07 durango?

[@Mr_Goody]

If you can look at my banner page at the top of my channel and click on my Instagram and shoot me a message, I will try to help you best I can.

[@StevenHanover]

Hey brother can i get away with just changing out the valve solenoid, or do i need to really also get another valve body plate the solenoid rests in?

[@alfonsofernandez13]

Do you have to relearn the transmission with a scan tool?

[@Mr_Goody]

No.

[@StevenHanover]

No

[@vandiverb]

Will this help with p0734? Should I replace the pack and the body also? Thanks.

[@Mr_Goody]

It is a 50-50 chance but it is possible that it needs a new side plate on The valve body. If you don’t want to order just decide play you can order the entire valve body like I did. But remember this is a 50-50 chance that it will fix your particular problem. Whatever you choose I wish you the best of luck my friend. ✌️👍

[@vandiverb]

@@Mr_Goody I'm just gonna order the whole body, pan, gaskets, filters, and pack. I hope it works! Thanks for the help!

[@Mr_Goody]

@@vandiverb Your Welcome

[@davereed7308]

Did you have to reset computer

[@Mr_Goody]

No, no need to reset the computer. Only to clear the obd2 codes with a regular scanner.

[@davereed7308]

Did not think i would get a response, i call for part but they are asking if its a deep or shallow pan. Was thinking of doing n oil change. It's calling for shift selinoid (C) . Or am I wasting my time on oil and filter change

[@Mr_Goody]

You’re not wasting your time. You can check by your Vin number and call the dealer and they will tell you if it’s a shallow or deep pan they should tell you that for free. Mine was a deep pan. It’s really not that hard of a job. You just have to have patience and believe in yourself. 👍

[@StevenHanover]

Cant see any replies

[@jasonharlow3910]

What gasket kit do I need for the 545rfe

[@wilfredotorres6958]

is that 545rfe?

[@Mr_Goody]

Yes sir.

[@dzmorgan11]

Hi I have 06 Dodge Dakota and all bolts are out on valve body but won’t come down.

[@Mr_Goody]

Did you make sure that you unplugged the wiring harness that plugs into the valve body? If that is not unplugged it will not come down.

[@dzmorgan11]

Yes the parking rod is stuck

[@Mr_Goody]

Thank you for the update I hope that you got it all fixed?

[@dzmorgan11]

Well I haven’t got valve body out yet because of the rod. I tried everything

[@BD-ts7bz]

mine aint coming down as well everything is loose do you know a tip?