How to replace valve cover gasket on HYUNDAI TUCSON 2.7L 2005~ G6BA F4A42 AWD

[@chris2178741]

Dude did this job in under an hour 🤯

[@reyrey520]

Hard to learn this guy doesn’t talk good luck!

[@DevJB]

Don't forget about the HECU recall for this and Sportage.

[@CountryBlessingz]

Greetings and thanks for the video. Is the camshaft position sensor located in this area as well (2006 Kia Optima)???

[@pressureflipin1992]

It is, it's actually almost dead center of the motor. If you open your hood, take your right arm and point slightly down wards. You will see it. If that car is giving you a code for that sensor it's most likely not that sensor. I had a Hyundai sonata, it's exact same car and they have exact same problems.

[@CountryBlessingz]

@@pressureflipin1992 Thanks for the response and I changed one but still a code. I changed one on the outside of the motor to the right.

[@pressureflipin1992]

@@CountryBlessingz yeah that's exactly what I mean that code is actually for three or 4 different things, I really really wish I could help you but honestly I never got a chance to fix the car. I had three different mechanics look at it and they couldn't figure out why it kept giving me that code. I had to junk the car.

[@CountryBlessingz]

@@pressureflipin1992 Awww I'm sorry to hear that but I truly appreciate your advice. Thanks again and be safe.

[@pressureflipin1992]

@@CountryBlessingz no problem. Stay safe

[@emrewsemrews761]

hi sonata 2.7 valve cover gasket how many kg torque should be applied?

[@AdrenalineRushMX]

7 foot pounds

[@bonneykell7491]

Those bolts are supposed to be in a sequence and torche to spec .

[@paintbawler345]

It looks like he installed the intake plenum without replacing the gasket! I saw him remove the old one, but a new one was not put in!

[@pressureflipin1992]

@Mr305Maxxx you can't do that! The area has to be cleaned meticulously before you reinstall the gasket

[@your247support]

It’s a metal gasket you stupid. He doesn’t have to change it

[@antonjames8405]

@@your247support i did mine..it wasn't metal .... even so , the area has to be meticulously cleaned ,,,,this guy is too sloppy .... how can he use the top of the air filter as a place to lay his tools ..!!!?? also did not cover or protect the air intake ports till later in the video ...also you are so deep iinto the engine already ,,,why not do the spark plugs and the pvc valve ?..or at least in the video show that you checked them

[@firstchoicemotorsinc9043]

you have no close ups and speaking on your 05 tucson valve cover replacement not good video

[@shawn1472]

7 ads? No thanks, money hungry. Not helpful