How to Replace Valve Cover Gaskets 2000-2007 Ford Focus

Buy Now!
New Valve Cover Gasket Set from 1AAuto.com 1aau.to/id/1AEG...
This video shows you how to install new valve cover gaskets from TRQ on your 2000-2007 Ford Focus. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Pry Bar 1aau.to/o5V/1AX...
• 13mm Wrench 1aau.to/o9S/1AX...
• 8mm Socket 1aau.to/obAo/1A...
• Ratchet 1aau.to/ob2p/1A...
• Socket Extensions 1aau.to/obXE/1A...
• Torque Wrench 1aau.to/oa4X/1A...
• Brake Parts Cleaner
• Gloves 1aau.to/oaRq/1A...
• Paper Towels 1aau.to/oLy/1AX...
• RTV
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@loc_g_thang]

thanks for this video,it's very helpful😀

[@TRQ]

+@loc_g_thang Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@lilboi8424]

what brand your using for torque wrench?

[@agsession7664]

I would not recommend using compressed air like that. I did that with a leaf blower on the same care and it blew tiny shavings on to the alternator at the back of the engine and shorted it out. I use a vacuum now. This video is great though. I don't know why the shaving where there but they blew up into the like a fine mist. I think the valve cover had something going on with the metal. This was on a 2.3 focus 2003