How To Replace VVT Solenoid 2003-08 Nissan Maxima

Buy Now!
New Variable Valve Timing Solenoid from 1AAuto.com 1aau.to/ia/SPVV...
If the variable valve timing solenoid in your vehicle is stuck or clogged, causing your engine to not run properly, you may notice reduced fuel efficiency, sputtering, rough running or stalling in your engine. Solenoids usually need to be replaced once they begin to fail. This video shows you how to install a new variable valve timing solenoid in your 2004-2008 Nissan Maxima.
• Check here for more videos on the 2004-08 Nissan Maxima: • Nissan Maxima 6th Gene...
This process should be similar on the following vehicles:
2004 Nissan Maxima
2005 Nissan Maxima
2006 Nissan Maxima
2007 Nissan Maxima
2008 Nissan Maxima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 10mm Wrench 1aau.to/oa/1AXA...
• 12mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 12mm Socket 1aau.to/oa/1AXA...
• 5mm Socket 1aau.to/oa/1AXA...
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Marker / Writing Utensil
• Paper Towels 1aau.to/oa/1AXS...
• 5mm Hex Socket
• 5mm Hex Wrench
• Pick 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Maxima 6th Generation 2004-2008: • Nissan Maxima 6th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@nicholastownsend1393]

Amazing video hardest part is the manifold removal. This is my 2nd time doing it; let’s just say the 2nd time went a lot smoother than the first!

[@terrancegrant1664]

And if you are doing the firewall VVT on the VQ35, then while you have everything apart (1) check your spark plug tubes for oil and (2) replace your spark plugs as well.

[@oSTYNCLSYo]

Is bank 2 the rear vvt solenoid?

[@crossfaded8432]

Forgot to mention it loses power in the midst of driving

[@syirdabarh.4516]

(HELP) would a bad VVT throw a code p0021? I recently replaced bank 1 and 2 camshaft sensors but my car still stalls at red lights. I’ve replaced the fuel pump, vias solenoid, 6 coil packs and plugs, crankshaft sensor (underneath the car), and valve cover gaskets. I’m stomped any advice for a DIY mechanic 😂

[@john1120]

So we're not gonna replace both?😄

[@fricardoflores1977]

Como saber que está malo cuales son las fallas

[@floridaboi3059]

Do you need gasket sealer for that gasket?

[@juansantiago5375]

How you know is working

[@john1120]

Voltage meter

[@fricardoflores1977]

Me interesa el video pero solo los quito y puso por que razón ocúales eran las causas de cambiarlos

[@DARKKSHADOW]

What part and where to get for a 2007 Nissan Altima

[@perezgiselle]

Will this work for an infinity i35 2003???????

[@tylercarlton8544]

The part you have listed is the front solenoid so is the front considered closest to fire wall? In the video you say front is closest to radiator.

[@TRQ]

+tyler carlton Thanks for watching! It will be the one towards the front of the engine.

[@tylercarlton8544]

@@TRQ thanks, after further watching the video is realized that. Thanks for the video!

[@jgailey916]

Perfect video

[@anthonylopez6786]

is this the solution for code p1800

[@trizalex5168]

Is there a specific torque spec for the vvt bolts?

[@mikeadler8239]

8 ft lbs

[@slimmmslimm8692]

Is this the same for a 2014 maxima... dealer trying charge me 2600 to replace them

[@kamaster1011]

Nope it’s completely different and more of a pain

[@mikeadler8239]

Dealers charge crazy prices. That whole job on your car takes less than an hour for anyone who knows what they are doing. I suggest you always look for a good local shop. If it's ever something that has to go to dealer, they will let you know that.

[@crossfaded8432]

I broke my connector now my car drips oil