Рет қаралды 21,569
Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00235
This video shows you how to install a water pump on your 2008-2010 Ford F-250 (6.4L Diesel). The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obbj/1AXAA00013
• 10mm Socket 1aau.to/oaW6/1AXAA00017
• 11mm Socket 1aau.to/obfD/1AXAA00015
• 13mm Socket 1aau.to/obfD/1AXAA00015
• 8mm Socket 1aau.to/oaW6/1AXAA00017
• Fan Clutch Wrench
• Air Chisel 1aau.to/obg/1AXAA00270
• 3/8 Inch Drive Ratchet 1aau.to/obfD/1AXAA00015
• Socket Extensions 1aau.to/obfD/1AXAA00015
• Torque Wrench 1aau.to/oauI/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oLI/1AXSS00048
• Safety Glasses 1aau.to/oFe/1AXAA00343
• Drain Pan 1aau.to/ovW/1AXAA00320
• Pick 1aau.to/oJc/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/oh7/1AXAA00280
• Rubber Mallet 1aau.to/of5/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.