How to Replace Wheel Bearing & Hub Assembly 2001-2007 Volvo V70

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@paulnielsen8528]

OMD. too much disassembly. remove the wheel. Remove the axle screw. Remove the ball joint nut. Pull the control arm down and pull the axle out. Pop the hub out (slide hammer) and install new. Easy.

[@JPShelton]

I’m an A&P and this is One of the best Car how-to videos I’ve seen. Great job! Thanks

[@jordrider1917]

Great tutorial. I should have just removed the entire hub/knuckle assembly when doing my ball joints and struts. Would have been 10x easier to replace the wheel bearings at the same time.

[@vanhopeoriginal.1555]

Perfect video , a job for me and my C70 next week 👍

[@wojciechb4637]

Great video - thank You !

[@yodmedaychar6034]

you are an excellent repair and maintenance.. thank you so much make me the best guideline for me I use done Volvo 850

[@waclawspeed]

Najlepsze wideo o wymianie piasty w V70

[@focus678]

Easier removal than the late models of volvo.

[@XC70_OVERLANDER]

Is it the same procedure for a 2006 XC70? Awesome Video. Cheers

[@Nice-g8j]

respect ✊

[@odinnm]

You did put some greasy fingerprints on the brake pads, otherwise a nice job.

[@elmis123123]

NEVER use antisieze between hub and rotor!!! It relies on the friction to not turn/twist and sheer of the wheelstuds.

[@andywarrington4738]

the pickup as you call it for the abs sensor ( proximity sensor ) it is not the bearing face it is the reluctor ring on the drive shaft , do not give wrong information

[@yara-4608]

Never reuse stretchbolts…

[@kimegekjr5971]

9:05 - Magic. Suddenly its loose ;-) I am sure it was a fight.... What out for the cut outs. This can be a challenge.

[@DURAK69]

bra kvinna tack

[@todd9391]

Your missing the the wheel bearing dust seal. SHAME ON YOU! THE BEARING WILL GET RUSTY FROM THE SEAL BEING MISSING. BEARING MIGHT LAST A FEW YEARS.

[@bmwm5bmw610]

I did the same job but you didn't remove drop link is pushing that shock absorber alot,,,, shock can't go back in the same position ,,,alot of pressure of that drop link ,,wrong informative video,,,wrong

[@mintyjhiphopvideos2239]

T of that is so unnecessary

[@SilverChief]

That is one trashy car undercarriage. . My 2005 s80 with 200k miles looks pristine new under carriage. Thats the advantage of arizona lifestyle...NO RUST NO GRIME ....looks almost factory new/.