How to Replace Window Regulator 1997-2003 Ford F-150

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@davevillalobo9910]

Excellent video and very explained 👍

[@hippo-potamus]

How do you move the window up to access the lower bracket bolts when the motor is totally dead and window is 100% in the down position??

[@AraceaeFanatics]

These should be done assuming the regulator is being replaced because the original is no longer operable. So showing replacement instructions displaying how to get the glass screws out without being able to lower or raise the window to remove the bolts holding the glass.

[@jerryweatherman7468]

Appreciate the video , but you left out very important answers that was needed by several . Maybe next time someone will give ALL THE ACCURATE ways to do the job.

[@SpiritOfJesus777]

Awesome video. Thanks man! I had this changed out in a couple hours

[@gcorpus5558]

Thank you sir. Excellent job. 👊🏼👍🏼

[@davevillalobo9910]

Excellent video and very explained 👍

[@Perkyglee556]

Well thank god my motor works 🤣 imma have to rig up something else in place of the rivet. Some thick screw & washer maybe.

[@powerking73]

Does the new motor have to be "indexed"? I replaced mine and it just wants to keep going up once it's all the way closed.....same with rolling down

[@jonathanangles8844]

What size rivets are needed to do this job? All you said in the video was to use the correct size but never said the size that you used

[@levilloyd74]

Does it matter what rivet size you use?

[@edgarflores5898]

Excellent video I hope you share more videos

[@cassandranevarez4958]

Do you have a video replacing the motor for the windows on your truck it’s just like mine the other videos are different trucks

[@jgc113]

So u used the same window regulator? Cause on the video show a brand new one, but when trying to put the motor onto the new regulator. It looks like you put the motor on the old regulator. Can you explain us why?

[@2010dlewis]

Yeah mines stuck all the way up. The motor works. Just went to far.

[@djbiggzvendettasound7470]

So how can u do this is the widow isn't moving because the motor or switch isn't working 🤔

[@JoshuaPlaysMusic]

I’m replacing the motor because it’s not working. How do I do it when it’s all the way down and won’t raise?

[@perez9905]

Did you use new rivets?

[@foreverwood1963]

I've not seen any where rivets had to be grinded off.

[@jeffpatchell6413]

What will a shop charge for this?

[@SantiagoGarcia-hf7wf]

Bueno

[@djbiggzvendettasound7470]

This guys isn't replying to nobody because he doesn't have the answer for a installation of a dead motor

[@AntonioLopez-ql8zm]

Ok

[@VolvoGonzo]

That's fine if your motor works... lol..

[@williamwinterstein502]

Worthless. Why is he replacing it if it works?