How to Replace Wiper Motor 1994-2004 Chevy S-10

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@kezi7728]

Thanks for this video. I bought a new motor from you guys and decided to replace it myself

[@Brenda-nc7fq]

Great video, to the point and no goofy music or personal info. Thanks

[@kylefarrell2841]

Excellent video! Very informative and no bullshit filler. No unnecessary yap!

[@mymusic3354]

Another project on my list....You sure made this look easy!

[@TRQ]

+@mymusic3354 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@jamescarter6318]

Pro tip. If the screws seem stripped and wont come out. Gently pry back and forth on them with a flat tip screwdriver. They screw into replaceable plastic expansion clips.

[@scottsheppard4735]

Rumor has it, he's still looking for all those screws that jumped into the engine bay

[@rydob20]

Great video, thanks for posting!

[@YungAir]

So I have an issue - passenger side wiper blade doesn’t move on my 2000 Cadillac Escalade but the driver side does move. I would assume the motor is still good so my problem is probably with a linkage arm or something is stripped out. Any advice on what to check before I just replace the entire unit?

[@reyescr21]

How did you took off the screws for the plastic panels, are they plastic, thanks.

[@jcs_gaming_3118]

I pulled them out with two philip screw drivers. I wasted too much time trying to unscrew them 🤦

[@iridiumnight42]

I pulled em out with pliers.

[@tylerbyrum1921]

I used a hammer

[@JarSquats]

A little description of the bolt/nut sizes would be nice

[@HeatherSchlafke]

Cool I can see

[@heatherbarton1144]

Does 04 chevy blazer have 1 or 2 motor

[@luisarturogarciaarmijo9117]

Excelente 👍

[@driftingover]

Yeah, but how do you remove the plastic screws? You completely skipped that part. Mine just spin and spin.

[@harveyloveall7066]

Just pry up the screws and then pop out the plastic collars.

[@keithgraham8874]

Great video!

[@iridiumnight42]

Got as far as the bottom bolt on the motor and couldn't get it out. My wrench wouldn't fit so I had to put it all back together.

[@urgae1347]

10 mm socket works

[@SOLDOZER]

You made it look too easy.

[@lalo2641]

Thanks

[@YungAir]

Liked & Subscribed to support as well!