Thanks for doing this. Liked how you indicated the bolt sizes so I know what to expect in advance.
@newyorkerinct28216 жыл бұрын
Cool, thanks for watching
@salvadorllamas8726 жыл бұрын
great video
@perlaym24 жыл бұрын
Thanks for the vídeo, it was very helpful. Also, I noticed that cool ratchet you showed towards the end, the SK stubby ratchet, by far my tools of choice.
@chuckvo615 жыл бұрын
On my son's 2010, the 2 starter bolts were facing the front of the car at a right angle to the starter. 14 mm, had to use an universal joint for the lower bolt. PITA.
@newyorkerinct28215 жыл бұрын
K
@michellesmith777775 жыл бұрын
Great video did you have to enter in any special vehicle codes to get it to start back up?
@newyorkerinct28215 жыл бұрын
No
@springercobra2 жыл бұрын
Not a bad video but just wanted to add that I have a 2010 one but it has a starter that is an exact to a 2011. So just know they are a pretty big difference and harder to do.
@newyorkerinct28212 жыл бұрын
Okay
@uphill2484 жыл бұрын
Hi, After giving my Honda Odyssey 2006 a jumpstart it started fine. But the dashboard had no light. The only lights were on was the brake lights the seatbelts and the VSA light on the dashboard. The gas gauge was on E while it was running even though I have a full tank. I ran it for about five minutes. I put it in reverse the engine shut off on me. It wouldn’t start back on. And now I have No headlights. What could be the problem? Maybe the alternator Not the starter?
@newyorkerinct28214 жыл бұрын
Yes,maybe.
@VaderYouSeekVader7 жыл бұрын
Where did you get this starter from? I heard that the ones from Auto Parts stores are trash.
@newyorkerinct28217 жыл бұрын
I think it was from Arch, don't buy aftermarket or rebuild starters.It won't last more than a year, this was the second starter i put in.But i had lifetime warranty on it.
@bigjun9134 жыл бұрын
2007-2010 starter faces toward radiator it is different
@cassiebyrd80294 жыл бұрын
Good video thanks for the help.
@newyorkerinct28214 жыл бұрын
Glad it helped
@nathank54906 жыл бұрын
Do NOT trust this video to show you all the steps!! He completely neglects to mention the two 12mm bolts underneath the tray that are a HUGE pain in the butt. There are other, better vids that mention this but so far none I can find show you how to get them. Plan on using a 10-12 inch socket extention with a universal joint to get the one in the front right corner of the tray.
@newyorkerinct28215 жыл бұрын
K
@sawdoff725 жыл бұрын
Was your starter making a noise before it went out?
@newyorkerinct28214 жыл бұрын
Can't remember, i don't think so.
@stunnaoferrthang7 жыл бұрын
what year is this honda
@newyorkerinct28216 жыл бұрын
2005
@jfpinkston15 жыл бұрын
2007 is different
@maxjacobs72494 жыл бұрын
jfpinkston 2008 bolts are in different location. Look up part and you can see where the starter bolting flange in different. That’s because it’s a Honda😡
@juliocardona48334 жыл бұрын
Why you change the star
@newyorkerinct28214 жыл бұрын
Because the car wasn't starting.
@j4ee5ps8 жыл бұрын
The 2007-2010 models are different in location and style of Starter
@newyorkerinct28218 жыл бұрын
Okay..
@ceciliaedingfield22555 жыл бұрын
Yes 2009 way different, way left of those 2 hoses
@wenzdayjane3 жыл бұрын
I'm doing this on my 2010 right now. Seems like I might have to remove the hoses in order to access the starter mount bolts?