HOW TO REPLACE YOUR FUEL, OIL AND AIR FILTER

[@peterreid6364]

Hey mate great videos. It's a good step by step for people doing it and I like how you show what you're doing as you go. Keep up the good work and great vids. Ps have you thought about installing a oil catchcan

[@ServiceMyRide]

Peter Reid thanks for the great review an support of my channel, glad to help out with my videos

[@ServiceMyRide]

Will be installing a catch can in a next few episode 👍stay tuned

[@patrickfountain198]

Any advice about cleaning air intakes? I just picked up a 140,000km old Triton and the talk about EGR build up is stressing me out! Cheers

[@ServiceMyRide]

Will be covering the intake manifold on removing an cleaning in a few episodes, also installing a good quality catch can an cleaning out the intercooler would be the first step, also block off the egr via cable or plate, get your hands on a workshop manual to remove an clean the intake as you will need the specs to install it.

[@bigden331]

Thoughts on additives like purge , injectors cleaners

[@danielbass09]

Hey. Just want to say did you know there is an access door inside the wheel well to get to the oil filter!!! Way easier than spilling it all over your hoses. Cheers.

[@cb3147]

Trying to get more mechanically handy. Thanks for taking the time to put this together. Saved me $100s of $$ and was great to learn.

[@alibahrami3119]

I have below 0 mechanical skills ....you are a bloody legend for uploading this videos ....will definitely keep my patrol in better shape with filter maintenance. Thanks and subbed to the channel by the way

[@XIXjlo]

I have just serviced my L200 After watching this video. Also watched the cabin filter video. New EBC disc and pads getting delivered soon from EBay. Will be fitting them also. The same model L200 is sold as Barbarian or Warrior in UK. Thanks to your video, I’m saving money. 👍👍👍💪🏼💪🏼

[@ServiceMyRide]

Thanks for the great feedback, good luck with the up coming jobs to the L200, happy to hear from viewers all over the world using my videos and saving a few $$$, Thanks for watching!

[@nathandayman7588]

On my 3.2 MN the oil filter is underneath which makes it easier to access. I was able to change my fuel filter (same type as the video) without removing everything which saved a heap of time! You do a very good job explaining things mate! Keep up the good work

[@zacfeno]

Cheers for the fuel filter part. Never done one on a diesel and wasn't sure of the process. Saved me a trip to the mechanic

[@tristan363]

Thanks. Have a 2010 challenger and wasn't too sure how to replace the fuel filter. You helped out big time. Subbed!

[@TheBentarm]

Great vid. Just a note to make sure the old oil filter seal does come off with the filter, otherwise she'll leak like a bugger.

[@jacobmyatt6228]

Thanks for the tutorial. I also have an MN and this helped a lot!

[@ServiceMyRide]

Cheers mate

[@destinationyeahya4404]

Sorted my MN today thanks to your tutorial. Thanks heaps mate and keep up the solid vids. 👍

[@broncsrule2]

Thanks mate for the video, changed my first fuel filter today in my ml Triton with the help of this video. Great stuff

[@timofperth]

Thank you for posting this. A great video that explains replacing the filters very easily!

[@tomoconnor6971]

Thanks, great work. Just finished doing this and watching your video made it so much easier to tackle.

[@ServiceMyRide]

Awesome work, thanks mate 👍

[@10guitars]

Thanks for that mate , just spent the arvo servicing the car and it went off beautifully! I was having big issues with the car chugging along and no power , sh s good as new now 😀

[@ServiceMyRide]

Awesome mate, love hearing feedback like this, glad the vid helped out!!!

[@mylesgeraghty6335]

Awesome video mate thanks a lot for putting this up. it was a very great video. And I I followed it today when I changed my fuel filter for the first time on my MN Triton. And I like the way you explain it all.

[@terrylewis1868]

Thanks for the vid saved me loads of cash by doing it myself

[@benschafer1660]

Thanks man was stuck on the fuel filter but that made it easy as buggery

[@mr.magsy_boy2113]

Watching at 2022. Great video.

[@ScottMuller-rt3hn]

best video ive seen, well explained and shown

[@oliviagalvin6256]

Great Video, more importantly, where is the beach your driving on?? Looks bloody beautiful. Ben

[@ServiceMyRide]

Thanks Ben, Its Stockton Beach in NSW, 1.5hrs north of Sydney.

[@SKESE789]

Thank you for a well presented tutorial.

[@ServiceMyRide]

Thanks steve really appreciate the feed back 👍

[@onyachamp]

Haha yeah those side mounted oil filters are buggers. I remove the front bash plate and wedge a small plastic disposable picnic bowl under the filter on the better halfs MN Triton. It catches 90-95% of the leakage.Removing the hoses above it also help and only takes a minute or two.Latex gloves also help grip the old filter, making it heaps easier to grip and you can turf them before you put the new filter on. That way you aren't getting grubby oil all over the new filter, making it slippery to grip next service. Rule of thumb is tighten the filter on tight with your left(non preferred) hand and then you know you can remove it with your right next service. Cheers for the torque numbers on your vids

[@ServiceMyRide]

hey mate, I now use the Flexi funnel from Ryco when removing a oil filtter, Check it out!

[@ServiceMyRide]

kzbin.info/www/bejne/hZKTnKCnj9GHha8

[@onyachamp]

Service My Ride bewdy. will have a look. cheers

[@danielbass09]

You guys know there is an access door for the oil filter on the inside of the wheel well. Access it from behind the front right wheel. 😉 cheers

[@hellohello8556]

Good no nonsense video. Thanks mate! 👍

[@3zerman]

Hi - really great videos!! - Could you explain what is the device attached to MAF sensor? It is shown in t=1:00 . Thx

[@robertgibson4494]

That's great. Probably the best video I have seen.

[@fadilxheka1232]

Just wondering would you add engine flush before changing the oil.

[@DaveyDave668]

Perfect tutorial video, did all three last night and I'll be whacking in a cabin filter next week. Any plans on doing a radiator/ engine flush?

[@chrisgerrard2381]

That prime pump plunger does that always stay stiff? Or does it go back to soft

[@joshuaedwards7931]

Love this videos mate great help thank you

[@shereejeffreys3250]

Awesome video.. love the new introduction!!

[@zhr4121]

you can reach the oil filter by the side ,by the mudward near the tire easily and less burning risk by the turbo or exhaust pipes

[@ServiceMyRide]

yes you can remove the oil filter through the wheel arch, but you might not get enough force to turn it plus let the engine cool down to warm when draining the oil, doesnt need to be hot!

[@zhr4121]

@@ServiceMyRide i work changing oil and cannot wait for cool down, 20 min. and change is done,,just use an oil filter wrench and go on.... casually id change one of those today.... however nice video and explanation..

[@peterkabba7573]

Fantastic clear instructions

[@johnkaup6382]

Fantastic video mate

[@tinatawhai7]

I had someone add some oil in the filter before connecting it to motor will this damage the motor.

[@bushcraftbrotherhood9621]

Great video! Very informative and detailed! Thankyou!

[@rodywinmawroe1939]

Thank you so much mate

[@paulduncanson1342]

Extremely helpful video thanks ver much

[@rendooka]

Great video!!

[@TehTrixxable]

Another great video, keep em coming

[@ServiceMyRide]

Thanks mate, have lots of awesome videos still to come!

[@DrMbulisi]

Great video. Very educative!

[@Live4Style]

Hi mate. Just a question. I have a Mitsi Triton 2004 that runs on petrol. Is it a must to top the filter up with petrol before installing? Cheers

[@ServiceMyRide]

No but you will just have to prime it for longer to start it.

[@snifferj]

Great video mate

[@alexalfaro5125]

Thanks I’m new in diesel motors 😅😊

[@MegaPatients]

Really good vid bro...

[@pa1264]

Can you please do a video on how to clean carbon build up and oil silt from the turbo.

[@ServiceMyRide]

Hey mate, Are you talking about the carbon build up in the manifold?

[@pa1264]

@@ServiceMyRide yes

[@ServiceMyRide]

@HOBIE KAYAK video on Tuesday will have a quick walk through of the procedure, more detailed video will follow in a few weeks.

[@pa1264]

@@ServiceMyRide awesome thank you so much for your help very much appreciated

[@dannychristie5628]

AWESOME maaaate! so good!

[@amirbenjeddou7479]

well done mate 👏

[@randomnomad2490]

what year is your triton mate?

[@mustbejon3980]

Thanks heaps mate!!! Great video!!!

[@oscarthefunnyboxer]

Awesome video!! Cheers

[@tysonmodestus8520]

My colt speedometer freeway side isn't working with my mileage

[@trulymeparker]

What size bolts hold the fuel filter on? 12mm?

[@trulymeparker]

To answer my own question, yep it's 12mm

[@stevenlaube7535]

& don't forget to respect the Australian environment its the only one we have . in low low

[@ernestra57]

How to reset water in fuel light indicator. I washed the engine and start it. All of a sudden yhe water light indicator in Mitsubishi triton came on. Engine does not start. I removed the disel filters

[@musungchoi]

Hi, Should I change the fuel filter every engine oil changing? thanks.

[@ServiceMyRide]

Choi Musung depends how often you change the oil, I replace oil filter every 7500k an fuel filter 15k

[@Mike_P646]

Great vid👍

[@derrickabizy6074]

thanks mate

[@jefflangdon3540]

Good vid bro.

[@ercanonline7073]

Very good joob good videos i love you bro 💓

[@JamesNorton-n7k]

Your air intake is different to mine. Maybe that’s why you don’t have to take it off.

[@DiHandley]

I’m pretty sure I’ve seen this guy selling ladies lingerie at Myer. 😳. Well maybe not. But he’s certainly good with his hands and advice! 😂😂😂

[@ServiceMyRide]

definitely never worked at Myer but if this youtube doesnt take off i will give it a crack 🤣🤣

[@haydenriley5063]

Your using the wrong oil man nulon and penrite are the way to go shell helix always stuffed up my mn triton I switched penrite and nulon

[@bugoynatural8159]

👍

[@andrewatley364]

You won’t be able to access the oil filter without removing air intake. Yours has a snorkel which removes the air intake.

[@ServiceMyRide]

Andrew Atley, not true mate, I've only had the snorkel on for 12 months, done the oil change the same way since new,

[@andrewatley364]

Fair call. I removed the air box for ease of access. Ps great vid.

[@mmann6701]

Andrew Atley there is a flap with scrivits in the right hand side wheel well where you can access the oil filter from to save removing the air box

[@johntighe9895]

@@mmann6701 Thanks MMann, I will do that. Do you take the wheel off or just turn it and jack it up ?

[@mmann6701]

@@johntighe9895 No need to jack up the car, Just turn the wheel to full right lock and you will see a soft plastic flap with scrivits in it. Take them out and you can access the filter through there.

[@msoodaldossari7745]

🤙🏻🤙🏻🤙🏻

[@Mat-rs8yw]

Here's a novel idea. Why don't you put the type of Triton you have in the title... There's more that one, ya know. And guess what!! They ain't the same!