How To Replace Your iPad Air 1 Screen Digitizer | AppleiPodParts.com

BUY THE PARTS & TOOLS WITH CONFIDENCE!
IMPORTANT choose digitizer colour at link below:
FOR iPad Air 1digitiser & tool kit BUY HERE: geni.us/iWqn0z
Buy at our amazon affiliate link above to support our channel and help us keep making these awesome guides for all of you, we receive a small fee if you make a purchase through one of our affiliate links.
Don't forget to SUBSCRIBE & LIKE - comment with what videos YOU want us to make next!
Do you have a broken iPad Air 1 screen that you want to replace? do you need a guide to show you how to fix your iPad Air 1 glass touch screen yourself?
Watch this excellent and detailed video guide tutorial on how to remove and replace the Apple iPad Air 1 glass digitizer touch screen assembly without damaging anything else, quick, efficiently and most importantly correctly!
Neil and Damien give you all of the details that nobody else does and helps you avoid all of those pitfalls that other video guides lead you straight into!
If the worst happens and you make a mistake then DO NOT FEAR! as you can get all of the iPhone spare parts at our website at the link below including all of the correct tools too.
BUY THE PARTS & TOOLS WITH CONFIDENCE!
IMPORTANT choose digitizer colour at link below:
FOR iPad Air 1digitiser & tool kit BUY HERE: geni.us/iWqn0z
Buy at our amazon affiliate link above to support our channel and help us keep making these awesome guides for all of you, we receive a small fee if you make a purchase through one of our affiliate links.

[@marklowe7431]

One of the better videos on the subject. Cheers.

[@sunley-tb5yt]

Thank you so much. I followed this step by step. Bought screen from amazon but if I need anything else I’ll use your place.

[@gap9992]

Thanks for the very helpful video. I bought the replacement screen via the link and it came with everything attached, including the adhesive. So the job was much easier than is shown in the video. All for £19.99. Couple of points. When you remove the little metal cover plate don't bother to unstick the connector from the back of the plate as it clicks back in exactly the same position. The flexible push in connector for the home button was a really tight fit width wise so was tricky to slot in. the tiny lift up locking clamp is not really a problem once you know it is there. A question - is it even possible to remove the digitizer without damaging it? If I had to get inside to change a battery I would get a new digitizer as well. But for an Air 1 that might make it a write off? PS - at 26:25 your man did not replace the small piece of tape over the connector - just saying so you know I was paying attention! LOL

[@newsvintage]

Hi great video, my wifes ipad air 1 battery was only lasting a few hours so I bought a new battery & digitizer changed them now it wont stay on battery wont charge above 67% turn it on and it dies in 1 minute showing battery 1% any idea?

[@Appleipodparts]

Hi Iain, thank you for the comment and well done for replacing those, it’s not easy. I would say either a faulty battery which can happen or possibly a power IC issue. If I were you then I would look into how to detect power IC issues and see if you can do it from outside of the iPad with an inline current reader, or possibly get another battery to try.

[@sharleneshatto1660]

How the heck do I get started with breaking the glue bond? I don't want to scratch the screen, but even with heating it up, I can't seem to get under the edge to start it.

[@Appleipodparts]

We recommend heat, but not too much as the heat softens the adhesive. We use small temperature controlled ovens or heat mats but a hair dryer would suffice.

[@madman2461]

Hello what is the name of adhésif

[@Appleipodparts]

Hi Mad Man thanks for the question! If you search amazon for “ipad red adhesive tape” the you will see the right stuff. Ideally, if you can then please click on the genius link in the videos description which will open amazon up and then search for it. That way we will get a small but valuable commission from the sale that helps support our channel :) Thank you!