How to Reset CMOS, Resetting Bios, Clear Jumper

How to Reset CMOS, Resetting Bios, Clear Jumper
Subscribe to Channel: goo.gl/rNmU4k | Blog: t-soln.blogspo...
Ad. PIA VPN, Cheap and Best Award Winning VPN: www.privateint...
Fix Software: • Fix Software
Security & Update you must know: • Security & Update you ...
Fix Internet and Browser: • Fix Internet & Browser
Fix Android phone: • Fix Android Phone
Solution for your Fire TV and Android TV: • Solution for your Fire...

[@user-jv2cw9xi6z]

Which pixel is the jumper

[@aaroozz]

Ho ho ho

[@CabStarr007]

This worked for me yesterday. Thanks to the uploader for the help, I'd all but given up 👍 1. Turn off machine, disconect power lead, press power button to expell any residual power in the machine (and also did disconnect hard drive to simplify things). 2. Found CMOS Clear pins on motherboard. 3. Pulled off Jumper Cap off pins 1/2. (says Normal on the motherboard for pins 1/2). 4. Placed Jumper Cap onto pins 2/3. (which says CMOS Clear for pins 2/3). 5. I did power on the machine at this point (not sure if it helped or not, or necessary) 6. Turn off machine disconnect power again, put Jumper cap back onto pins 1/2 (normal position). 7. Power machine on (hard drive still disconnected). 8. Screen lit up and after about 30 secs the round swirl appeared and I'm able to get back into the Bios which is now reset to the default.

[@huhuproudparentakong12kids55]

my pc doesnt turn on if the jumper cap is on 2/3

[@CabStarr007]

@@huhuproudparentakong12kids55 don't worry about it. As long as you've disconnected the power lead and pressed the power button with the jumper cap on pins 2/3, just replace the jumper cap back on pins 1/2 and power up the machine. Power back up and bios will be hopefully reset to default.

[@drexter09]

What happens if you are plugged in and turned pc on while jumper is on pin 2/3?

[@CabStarr007]

@@drexter09 no idea. But the guys message above suggests his machine didn't turn on. Other than that, I don't know. I was down this rabbit hole almost a year ago, and I'm not a professional, so it's not something I tackle every week etc... Good luck 👍🏼

[@GORILLA_PIMP]

That's so ridiculous that we gotta do it that way It's 2023 for cryin out loud

[@aqeel3700]

Feels like this video was recorded in 1969

[@dunkuzi5695]

I'm so stressed rn but you made LMAO

[@jordanfisher3103]

Atleast he tried

[@prestonorrick4317]

You'd think by now the manufacturers or engineers would come up with a physical button to push, similar to a reset or power button. It can even be tiny so not to be pushed by accident.

[@judeghazaleh3457]

A button? I don't think so, maybe toggle switch, or a slider, it can't just short two pins, it has to disconnect 2 pins to defuse battety power to the board, and short 2 pins to discharge residual power from capacitors and auxiliary circuits.

[@micmacha]

You can technically fit a SPST switch to the jumper; but I don't think you want to be putting yourself in a position to reset your mobo that often!

[@micmacha]

Whoa. P4MDPT takes me back... that was what, 2003? Congratulations on keeping it working for so long!

[@Driskoll97]

Here on intel desktop board. Worked like charm! Switched the jumper position, turned back on and the mobo immediately recognised it and let me get into BIOS.

[@shubhamverma1407]

Make sure after placing the jumper on pin 2,3 you start your computer. Then you'll be prompted with bios setting. Reset the settings and than save. After that place the jumper back on 1,2 pin and restart.

[@OutlawedPoet]

Is it necessary to put the jumper back onto pins 1,2? I've had the cap on pins 2,3 for over a year now after a failed overclock. Pretty sure I tried to put the cap back on pins 1,2 before, but the computer would not boot even though the BIOS was at the default settings. Might have to try it again.

[@Saintathantwinpeaks]

I assume, from a safety point of view, any time you touch the jumper the computer must not be powered?

[@herculesgaming9708]

I have asus p8h61 motherboard and I don't know where to put jumper back

[@Saintathantwinpeaks]

What a fantastic tutorial. Thank you from Scotland. 🏴󠁧󠁢󠁳󠁣󠁴󠁿🥃

[@hannahjung112]

Admit it, we're all here because we got too greedy overclocking

[@sheesh8757]

No my parrents put an bios on my pc because i game to much

[@Android25K]

Maybe hehe

[@chickenmag1657]

Nope, pc just fucking hates its self

[@bobzybob]

No I'm here to find out what's wrong with my motherboard.

[@Android25K]

@@chickenmag1657 oh, your PC has depression I see

[@oliverdomingo4661]

i followed the instructions and it worked! Thank you so much!

[@kampungan20an87]

How about if all usb port not detect can i do resetting i mean can also solve that problem?

[@vivianastridge2167]

Thia is what i was searching for. Thank you very very much

[@MuhammadRafikBakhtshiren]

This video not helping me. But I got a clue. I do my own way. I put jumper on 1-2.. Then turn on PC.. It starts and i clear the password.. Then i put back jumper on 2-3.. All things are good to go..

[@njasra]

My Pc is not Starting up, even i tried removing and reinserting CMOS battery and and ram, Couldn't the jumper in my motherboard. Fans are working fine, HDD is also fine as there is spinning sound is over there. but PC is not starting up

[@manishm.s9666]

Problem in Processor

[@Flying244]

When did this start?

[@bencemeszaros3666]

Try to select the proper boot drive.

[@snehashissaha4382]

I have same problem all are saying bios corrupt

[@AlejandroCab98]

I also have power pins, should i switch those too?

[@venkateshbalakumar1610]

Bro, should I turn on the power supply after changing the pin. In this video you haven't remove any components from the motherboard like ram, processor can I follow the same

[@jcopp2031]

I'm trying to figure out what language he's speaking? He sounds suspiciously like the tech help guy from Dell I talked to on the phone a couple of years ago.

[@gregt1592]

hahah

[@haneefbabu9843]

CMOS rest Should the device be powered on (mother board)?

[@AmonTran-kz4ri]

Thanks appreciate your sharing knowledges

[@edgarbeatbox]

Hermano!!!! Muchas muchas gracias! 🙏🏾 Enserio que me salvaste el día

[@drexter09]

What happens if you forget to turn back the jumpers to pin 1-2 whenn pressing the power button?

[@washingtonsboresme]

Will reset to default every boot.

[@pook3525]

What happens is I turn on the pc with the jumper on?

[@saurabhgawari5732]

After putting it into another 2 we have to on the pc

[@mkmoni588]

There is no jumper on my motherboard, how can I clean it, please tell me

[@sanidhyarajvocalist5001]

Do we have to keep the pc switched on??

[@atulsarode333]

Thanks Sir for sloved my Problem

[@EnriqueGarcia-vg3bl]

Thank you very much, you help me a lot !!!!

[@noel888]

why does it sound like most utube demo's have India voices...i have problem with accents...like they say 'lost in translation'

[@RaviKumar-lq9vu]

sir ek dell vostro 3471 desktop me windows dalne se pura install ho jata par last me finish hokar jaise hi restart hota hai to system fir se windows install hone lagta hai sir maine try kiya 1 bios settinch change 2 windows change 3. pendrive se boot kiya dvd wirter se cheak kiya fir bhi windows install nahi hua sir kya bios update se problam solve ho jayega

[@ShabdTechSupport]

check it by updating bios; it might fix; without seeing very difficult to figure it out; i hope bios update help

[@silverlight1837]

Thank you very much Sir

[@user-uv4xe3cq2y]

Suggestions: Use a pointer. Your finger is just too damned big. Next, use a tripod. All that shaking is too distracting and makes us seasick. Third, focus the camera. An unfocused picture is worth nothing. We can manage the accent if you will do the other suggestions. Thanks for the video.

[@michaelljimenez8331]

Gracias amigo por tu vídeo nada más con ver me ayudo

[@jacksrini2088]

Thank you

[@Raja-oi7xv]

Life saver . ❤️❤️❤️

[@romildoca7790]

Thank bro

[@amanjha461]

It's helped. Thanks

[@Arts_by_Ruchika.]

Secure Boot enabled and after not Boot

[@lollul2508]

This is legit y'all it worked!

[@drjacobsmith]

Thanks a lot bro

[@arshamghafari4906]

Thanks

[@muskansain876]

Bhai mere cpu ka jumpher tut gya can u help me ...m kya kry

[@ROOKTABULA]

Doesn't work. I've pulled the cmos batt, left system unplugged for 1/2 hour, moved jumper: @#%$&@$ password is still there

[@GORILLA_PIMP]

Right exactly me too

[@rageprince927]

@@GORILLA_PIMP did you find any solutions? ?? Because I'm facing this problem after I failed my ram overclock

[@GORILLA_PIMP]

@@rageprince927 Yes i pulled the jumpers And it reset the bios

[@rageprince927]

@@GORILLA_PIMPalready tyred but not working:((

[@GORILLA_PIMP]

@@rageprince927 I see hmmm what exact model pc/motherboard you got?

[@vivrasse]

Thanks man. should the power stays on while you dovthis reset?

[@ShabdTechSupport]

no

[@sosmicpw9145]

Bro my memory is at 60% just watching youtube

[@judeghazaleh3457]

5 minutes? Did you make that nonsense up your self? You don't have to wait. It disconnects the battery and shorts the system so any capacitors are drained of residual power, It's instant.

[@JustGotALife]

Do u have to remove the complete motherboard detaching all the cables or I can keep them as is and do this reset?

[@judeghazaleh3457]

@@JustGotALife No. You just have to turn the power switch off from the back of the power supply, or unplug the power cable from the power supply

How to reset RedmiBook 14 Bios password this way?

[@Shrie]

you can do it just by removing battery

[@GORILLA_PIMP]

Wrong

[@nazran91]

Thanks, it works

[@techguide57]

I don't have one

[@manfrommercury]

I don't understand Hindu ! Can you talk in clear English please ?

[@amaankhan1800]

Sir when I put CMOS jumper at first two pin my pc did not start and fan is off and when I put CMOS jumper my pc start but not open bios.my pc shows that CMOS CLEAR press F1 to boot and enter but I press the button and my keyboard is not working.please help me

[@abhishekshrivastav6162]

Maybe you have missd some steps try again

[@sushilyadav7369]

TECHNICAL AMAAN nice

[@loco2loudhoodrichbctrill265]

I know this is old but if anyone else is experiencing this issue and you have a PS2 port on your motherboard, you MUST use a PS2 keyboard (purple port) instead of USB while on the boot screen, since older PC's dont utilize the use of USB in the boot loader screen

[@automobileiti1076]

Sir mere desktop computer mai user login password bhul gya hu login nhi ho rha hai bios ki madad se password kaise delete kro plz help me😭😭😭😭😭

[@xoop890]

bhai mujhe bhi batade kaise kiya 2 mahine hogye pleasse papa boht maarenge 😭😭😭

[@ramishahmed2455]

I have 4 jumpers why

[@qouteler6092]

There should be 1 that shows next to it 1 - 2:normal 2 - 3:cmos reset

[@progressivevision999]

keyboard error or no keyboard present. Pls solve the problem

[@notachu]

Same

[@loco2loudhoodrichbctrill265]

In the boot screen?

[@loco2loudhoodrichbctrill265]

I had to use a ps/2 keyboard, then set USB config for booting, then I could use my USB keyboard.

[@abdullahijaz7104]

Maray ma jumper nahi ha

[@BetterThanYesterda]

Thx you savez me bro ...

[@ahmedrlachainepoubellelesd4879]

Parle anglais

[@sunilshinde3559]

It work

[@muhamadikmal6206]

Ni Thomas ma

[@WaveFunctionCollapsed]

oo position change karke start nai karneka na pc

[@donovanatkinson2480]

Ddr1 ram dam

[@pollydor07]

THANKS