How to reset factory data via RST on Android radio

[@idowutitilayo4755]

Which button will flashes three time cos I didn't see any light

[@PrzemysawRduch]

For Junsun and other Aliexpress units: Press RST and keep pressing 5 fingers on screen, until it going to the reset screen

[@khazen1234]

What if the touch isn't working? I'm persisting it's a software issue it was saving a setting before it stopped working

[@tylerboudreau9447]

Fuck you saved my day i was cleaning my screen while driving and i fucked the touche was all over the place thanks to you man i fixed it

[@sonono123]

I try but it just restart can you help me plz

[@kaumohlamonyane272]

​@@tylerboudreau9447 Commas are important brother 🤣

[@kaumohlamonyane272]

​@@tylerboudreau9447 How did you fix yours because I am having the same issue.

[@moeedashfaq1739]

Thanks a million for this. I've been trying so hard to reset it.

[@viabecsexpert5681]

When the LED light starts flashing, you can press it several times in time. Note: the different head units can't support the feature, So you can't enter recovery mode. Head units can only be rebooted using the RST button.

[@rocknrawls]

Tried this mine does not flash, even held RST 30-60 sec

[@RobertSaata]

Interesting colors of the screen I have px5 800x480 android 10 and it is calm (dark theme) but yours is elegant (no green?). Where to get one?

[@salvorustico1146]

Hi, I've had the same 10 and a half inch radio as yours on my Ford Fiesta 2008 car for two weeks, but since this morning when I connect my iPhone 12 pro and those of my brother which is the exact same carplay works a bit bag but never mind but I find the Maps icons not in production and the small one on the contrary and the bar on the left where there are the three applications plus also the touch button to go to the home page there is the bar on the left and moved to the right and surely I have to reset the radio or I'm wrong

[@raj.2bereal]

4

[@aleksanderstrzelecki7594]

What exactly kind of problems can solve hard reset? I suppose it will not be helpful for not working touch?

[@viabecsexpert5681]

1. Some software can't work well although you updated the system. 2. The panel button on the head unit lights up after booting, but it doesn't enter the interface. How Do Radio Touchscreens Work? For PX5/PX6 head unit, you can try to solve it via the solution below. If the touch stops working. so don't worry about that you can fix it by your self 😉 Follow these simple steps. 1. Please click setting > car > factory setting (password 126)> key study. 2) Reset the button panel first. and click "Touch Key Study". 3) Please click touch key study first. you need to click the "+1" and "+2" manually. And then you need to click the "+2" when the "+1" key will be changed to white colour. You need to choose "OK" 3. Choose the correct functions after you press the panel button. 4. Finally, you can click the "apply" button and "exit" button. Then the car radio will reboot automatically to save the setting.

In my case, the cameras don't work

[@marquesemelvin2425]

Quick question for u brother. I can’t enter my factory settings bc the screen is too zoomed in so the “ok” button after entering in the password isn’t popping up for me to go forward. How do i zoom out the screen so all the buttons show?

[@brettlyle8899]

I did the same thing I cannot touch anything to save my life!

[@taylorjess764]

Hello there, got one of these installed into my Vauxhall insignia and all works great apart from the fact that my head up display is now in Chinese, know how to fix this?

[@viabecsexpert5681]

How to change the languages. Please click Setting app -- System > Language & Input > Languages. You need to search for English and then add it. You need to press and hold the language name for 3 seconds, then move it to the top. I sent you video as reference. I sent you a video as a reference. kzbin.info/www/bejne/ZnSrimaKdsuGntE

[@fvigz10_]

Hello my friend! I have a problem with the junsun radio. My CarPlay stopped working after an update. It also has the reset button on the front, but as you say, it just resets. It does not go into factory recovery mode. can u help me please? im really tired with this issue.

[@gblargg]

Be sure it's a reset button and not a mic hole. Mine has some mic holes on the front which I wouldn't want to puncture.

[@giampablanca]

hi. I have the same radio on my Hyundai but I have a problem: the Android version is 10.0, but if I insert the 4g SIM it doesn't let me change the APN to adapt it to my personal card. it only gives me a list of compatible SIMs. Is there a procedure to unlock Android and allow a system update? Thank you

[@alexfranco1040]

when i connect to carplay the screen goes blank, and works when i leave the carplay screen, can rebooting fix the carplay issue, it only happens when i connect to the apple carplay

[@kachankachan389]

what to do if a long press of the reset does not work, the sensor does not work and usb does not work?

[@RusticWriterHD]

Hello after I restarted my unit in factory settings my panel light dosnt light up anymore is there anyway to turn it back on ?

[@viabecsexpert5681]

# Adjust the panel LED color 1. You can adjust the colour of the panel button. Please click the setting > Display > element. you can change it to your favourite colour. 2. If the panel button LED can't work, please change the option of "panel LED control" to "By Power". Please click the setting > car( driving, navigation some setting) > factory setting, password is 126 > other. You need to choose the By power option for Panel LED control. Finally, you need to click the "apply" button and "exit" button. Then the car radio will reboot automatically to save the setting.

[@POPOYVLOG]

Can I do reset while connected in the car?

[@sharkxraptor6814]

Thanks this video really help solve my problem

[@Elmostro21]

How can I do it for Podofo android car stereo?

[@JohnSmith-wd5ml]

Having a problem with this unit. It keeps factory resetting on its own. I keep reinstalling navigation app, DVR app and a launcher a few times now. Anyone have a solution to this?

[@omarmostafa.8352]

I hold it for too long and my head unit got exploded 😂

[@Jay_will1988]

Does this reset works on the android screen for the honda civic 8gen?

[@viabecsexpert5681]

If your android radio is PX6 version, I think the rest can work.

[@308shy]

Any advice Touch screen not responding , I might have accidentally turned it off in the settings and now I can't get into settings, only the right side panel is working

[@edinfific2576]

Hook up a USB mouse to navigate settings.

[@nickicenroad484]

I have an eonon M3BLA12 and stupidly changed the resolution to 1280. Now I cannot hit the keys right on the touch screen and cannot get to the confirm button to change it back. Does a hard reset erase resolution settings? Im struggling here

[@viabecsexpert5681]

video: How To Fix Android Car Radio touch screen not working kzbin.info/www/bejne/el6vo6Spd7mWhZY you can Calibrate the touch screen and then try to change it back.

[@aykutoncu]

Hello my dear friend. I did a firmware update. But I need to change IMEI. I am currently using v1.68. When I click on the android version, the text SN appears. How can I fix?

[@viabecsstereo1632]

Hi, if your system is different from our car radio, Our system file doesn't suitable for your radio. otherwise, your radio will be flashing or freeze.

[@inglpz]

I have a kunfine android 10 screen, but when starting up the logo appears fine, after that there are stripes in the middle of the screen and the message fastboot mode and it no longer starts, how can I access recovery mode to install the software?

[@rainav1885]

Did you ever get this fixed? I'm having a similar problem with my Kunfine 10 screen. It won't turn on and won't react at all when pressing the RST button

[@zaf1733]

Hi I’m having an issue where it says “car info program exception exit now”. The screen itself works fine but non of the buttons in the car work and I can no longer open the canbus settings or car info as it crashes. Any idea what to do ?

[@filipspacek5196]

Do you fix it ?

[@darekb.5532]

This method doesn't work for me. Should I try pressing the RST button with the ignition off and holding it down to turn the ignition on?

[@giallo.]

Inserisci un mouse nella usb, ti compare un cursore e puoi accedere alle impostazioni di fabbrica

[@darekb.5532]

@@giallo. This method doesn't work for me either. Not all settings are reset to factory settings. The color settings don't come back and that's my problem

[@zana5711]

@@darekb.5532 any solution? Same with my problem also

[@rubenmoncada5751]

Para Android 7.1 Car , funciona o hay otro metod? muchas gracias.

[@ayanafsar9042]

How to enter recovery mode in mytvs Android car stereo?

[@kennalezandrosmiguelsoleda9940]

Can you help me with my Acodo t10 android 12. It keeps on rebooting. Asks for password. Pls thanks

[@mohammedsaleh81]

Hi, Appreciate if you can help me.. I have android 11 headunit in my Pajer 2011, and I'm having an issue with the echo during phone calls ( other side hears his voice repeated ) when I use bluetooth conection. How can I stop this please

[@viabecsexpert5681]

There are several things you can try to stop the echo during phone calls on your Android 11 head unit: Adjust the microphone volume: Sometimes, the microphone volume on your head unit may be set too high, causing feedback and echo. Try lowering the microphone volume in the settings to see if that helps. Move the microphone: If the microphone is too close to the speakers, it can cause feedback and echo. Try moving the microphone to a different location in your vehicle to see if that helps. Check for interference: Make sure there are no other devices in the car that could be causing interference with the Bluetooth connection, such as a Wi-Fi hotspot or another Bluetooth device. Update the firmware: Check if there are any firmware updates available for your head unit. If there are, update the firmware to see if that resolves the issue. Restart the head unit: Sometimes, simply restarting the head unit can help resolve issues with Bluetooth connections and echo.

[@mohammedsaleh81]

@@viabecsexpert5681 Thanks so much

[@techyvloger4162]

Doest work for me it just restarted what can i do

[@samosotchi9699]

Hey i can't find sleep mode on my car android so i cn turn it off wut i cn do ?!

[@vanoushbrown4642]

Je n'arrive pas à faire hard reset sur mon autoradio android. Pouvez vous m'aider svp

[@giallo.]

Inserisci un mouse nella usb, ti compare un cursore e puoi andare nelle impostazioni di fabbrica per la modifica

[@ViacheslavShamal]

Это сброс до заводских ?

[@raihanraza5562]

Sir i pressd rst bottn d'trek system will off but not apear now anything how it on

[@Jenishgandhi86]

Do you have updated for Android: YT9216B_00002 V004_20190801 Android os: Android 8.1 XY AUTO: 3.0 (8227L) CAN BUS: 3.0 (8227L) DDR: 1G FLASH: 16G cpu: A7 1.3GHz x 4 display: 1024*600 MCU: 3.1 (8227L)

[@viabecsexpert5681]

sorry, i don't have the proper system file for YT9216B. I suggest you contact your radio's seller for help.

[@prototype7232]

Where can I get the reset (RST) presser (small stick)?

[@reinertkuras351]

Nimm ein Büroklammer biege sie auf oder Von Handy bei den Neuen da ist so was dabei wo man die Mikro karte wieder entfernen kann

[@arielljalil9201]

Hye my player fm radio is missing.. Can you teach me how to get back fm radio

[@viabecsexpert5681]

You can try to reset factory data. I think the app will recover.

[@Rabio977]

Svp .Est-ce que ça marche pour tout autoradio androïde ?

[@ethelcaldwell5278]

It blinked so what button are you pressing afterwards because I pressed the home button and it didn't work so I did it again and pressed the arrow and still nothing

[@giallo.]

Inserisci un mouse nella usb. Con il cursore puoi andare nelle impostazioni di fabbrica e risolvere il problema

[@HowlParanormal]

Will this re-install Z Link?

[@viabecsexpert5681]

Will this re-install Z Link? If you uninstall the Zlink app before reset it, it will re-install the Zlink app. you can click "check for update" to update the version. photos.google.com/u/1/search/_tra_/photo/AF1QipN6f-HxTVSI124xw61T6n4Olg48cN1ubl5C2Doa

[@hazemnaeem601]

Whats the enginnering development passward

[@rainav1885]

It's usually 0000 or 1234

[@nhckphipps]

8888

[@rc6696]

E quando nem inicia, fica em loop infinito do Android?

[@HodžaVelikiImam]

Hello my friend, I have a problem with a similar radio. I wanted to do a factory reset, and it started to erase the data, then it reboot itself and now its stuck with just a black screen. After manual reset its just shows the Logo and after that again just a black screen. Please give any info to fix this.

[@viabecsexpert5681]

You can check the radio fuse first. if the radio fuse is ok, Please test the three solutions below. Solution 1: Please DISCONNECT YOUR BATTERY. then connect the negative cable and positive cable after 10 minutes. and test whether the car radio could be turned on. For safety purposes, always disconnect the negative cable first. Solution2: 1) Please find a pin to press the RST button (long press) until you see the light button flashes three times. 2) Then press the RST button 3-4 times in time unit the panel LED light on all the time 3) you will enter the radio recovery interface. If you can enter the recovery interface, please try to test whether the screen can work well after resetting factory data. here is the video on how to enter the radio recovery interface. kzbin.info/www/bejne/nJXOlGePd9uGZpY Solution3: If solution1 and solution2 can't solve it, please unplug and unplug the PX6 chip and screen cable. How to remove the PX6 chip: kzbin.info/www/bejne/jpTNdZaiiKqNbdU kzbin.info/www/bejne/pHPHcoSMf72nnrc

[@bjmurali3908]

Gomechanic 9 inch android screen having heat. how can resolve..

[@leowjc]

mine doesn't flash for 3 times.

[@ahmedhamdy4633]

same to me " ankeway 7 inch , V10.1 "

[@anilsoy4]

My Autocrank unit too doesn't blink.

[@grahamcorran4509]

​@@giallo. that didn't work for me?

[@giallo.]

@@grahamcorran4509 but if you insert the mouse in the usb, you can move and replace factory settings.. try ( sorry 4 my English)

[@louiedee279]

Can't get into recovery mode

[@The18eves]

What is this song?

[@anasoft2002]

mine won't get that menu

[@tylerboudreau9447]

Dosent work for me

[@MrDanib1978]

I didn't know how long I had to press the reset button! I held the reset button for about 40 seconds (the 5 touch buttons blinked about 3 times) and now the navigation doesn't open at all. The 5 touch buttons light up, but I have no image at all. I don't know how to restart it, the reset button DOESN'T WORK. I look forward to an answer. Thanks a lot!

[@viabecsexpert5681]

Normally, it needs to press the RST button for 20-30 seconds. If you can't enter recovery mode, please check whether your radio version can support it. Because some radio versions can't support the function. only reboot the car radio, thanks

[@MrDanib1978]

@@viabecsexpert5681 thank you

[@andreadestino7370]

i don't have the coloured icons

[@viabecsexpert5681]

# Adjust the panel LED color 1. You can adjust the colour of the panel button. Please click the setting > Display > element. you can change it to your favorite color. 2. If the panel button LED can't work, please change the option of "panel LED control" to "By Power". Please click the setting > car( driving, navigation some setting) > factory setting, password is 126 > other. You need to choose the By power option for Panel LED control. Finally, you need to click the "apply" button and the "exit" button. Then the car radio will reboot automatically to save the setting.

[@louiedee279]

Does not work

[@ericcandido2824]

DONT WORK!!!!!!!!

[@cherlieliang1624]

hi

[@sylarfsa]

It didn't work on mine, I already have you all.

[@awarabagpacker]

Can you share your WhatsApp or Instagram? I wanna share a video of my car Android. My car Android stuck in a loop. I contact with the manufacturer but they replied they doesn't have software of this unit. The unit is run on Android 6. I purchased 2 years ago. I really need help.

[@viabecsexpert5681]

I'm sorry, we don't have the correct update files for your Android 6 radio.