How To Reset HP Officejet 4620 Printer 4610

[@Josiekms]

Hi there I just changed my Wi-Fi password and after that I can’t connect to my printer if you can help me. To reconnect to Wi-Fi .

[@rainerrenner8160]

You are my hero. Thank you so much

[@patriayvida4209]

Very interesting information . Thanks for sharing. But my problem is different: I can't connect it to the home network. I've seen several videos, followed steps and nothing. Very disappointing 😢. I'm very frustrated actually. Mine is same model as yours. Could you Help Me? Please? Thanks In advance and Happy New Year 2024🎉!

[@303electronics]

Thank you! Happy 2024 to you too! Does the printer find a wireless router when you are trying to connect? Also, if you previously had this or similar printer installed on your PC or phone, make sure you are selecting the correct printer to send the job to.

[@gmailer774]

SAME PROBLEM I CANT CONNET TO WIFFI@@303electronics

[@hukilaulau]

I went through your process. It says alignment completed. I pressed ok. Then it says to "insert HP software CD and follow instructions on my computer", but I don't have any software CD. What can I do to reconnect my printer to my computer to print?

[@sunilj10]

I am at the stage - Install Cartridges and even after I put in brand new cartridges it’s not moved from that screen.

[@303electronics]

Try cleaning the contact areas on the cartridge and on the carrier. Also, make sure you remove protective tape on cartridge.

[@AbiAble]

Can you help. How do I reset when display does not light up, hp does no boot, only signs of electric to this unit is the power button, which lights up, but does not turn off or turn on>> I replayed power block for a new on, but no change.

[@303electronics]

Hello. There is a wire that connects the control panel to the main board. Make sure that is connected properly. It will need you to remove the control panel, which is not hard really, you will need a T10 size torque screw driver.

[@dsglobalboutique4418]

@@303electronics Where do you find this wire on the printer

[@sunilj10]

I am stuck at install cartridges display message after partial reset and it’s stuck at that position. What do I do next ?

[@LetsPlayKeldeo]

I am stuck at an error message how can I get into the menu without getting into the home screen ?

[@aakissi]

I’m stuck at printing alignment page, please help

[@303electronics]

Hi. Is it printing alignment page or not? The alignment page needs black and cyan colors to be good. That's when the scan is going to take the alignment page. If you want to skip alignment, you can press "OK" on the message that tells you to do alignement.

[@aakissi]

It’s not printing alignment page and I can’t skip it

[@aakissi]

Even if I turn it off and back on, it still goes to printing alignment page

[@chela242]

same here *now even after I turn it off at the main and come back on it stays stuck flashing on 'printing alignment page' @3:33

[@ishiemoreno]

I cant scan.😅

[@laurachelaru6201]

Me to. 😢

[@AbiAble]

Can you help. How do I reset when display does not light up, hp does no boot, only signs of electric to this unit is the power button, which lights up, but does not turn off or turn on>> I replayed power block for a new on, but no change.