How to reset the toner levels on a brother MFC9340CDW

[@victordelafuente5466]

I am so thankful for this very calm and instructive video, guiding through all the steps and explaining it all along the way, like talking/explains it all to a good friend with caring dedication. No teacher here who knows it better, just a caring fella! Thank you so much for sharing your findings and your thoughts. So much insight easily acquired. Thank you

[@RangieNZ]

Nice trick to find the * using fax. BTW, "STD" is standard, "STR" is starter (= ~40% of a standard).

[@vivaolay92]

So useful thorough those years. TY so much

[@laurelhill5109]

Saved my life today! i had tried everything and nothing worked. Tried your technique and boom magic! Thank you sooo much.

[@desereelanda8747]

Not all heroes wear capes. Thank you so much! This will save my office so much time and money. I was about to take a baseball bat to both of ours.

[@losguzman01]

I was getting frustrated with this printer until I found your video. Thank you 🙏🏼

[@twocatz01]

Thank you for this video, very helpful. I always thought the printer actually measured the amount of toner used, and not the number of sheets printed! This will definitely save money.

[@vekk1138]

Thank you for the Fantastic video! VERY IMPORTANT UPDATE, at least on mine I had to press * and # simultaneously in the same exact manner as shown in the video, but just pushing * did not work. Hope this helps people like me, it might be a different firmware version or something...

[@sarahlarson7367]

Thank you! This sneakiness of manufacturers is so environmentally and ethically unsound. I couldn't figure out where the asterix was and you provided the answer I needed. Love the brother printer but hate that they try to get customers to waste toner!

[@fritzbrause6332]

Thank you very much! Worked like a charm

[@ramdbzdude0_0]

Worked like a charm! Thank you.

[@yaseen2703]

Genius! Thanks man 🙏🏽

[@heppylifestyle]

AWESOME. I'm back up to 100% for the 3 colors. the low ink message made no sense -- i knew something was wrong -- thank you!

[@simonroberts3661]

Hi, many thanks for this, really helpful. Just one thing, I have just followed this procedure and if I believe you should select STD for a standard cartridge not STR. Thanks again..

[@TerryTurlek]

Clear, concise perfect instruction. Worked like a charm, first try. Thank you!

[@oldgoatgaming]

Amazing ! Actually a video with helpful information that works !! I've had this printer for years and would never had come across this video if it was for the printer not working with three new cartridges I had. I thought at first, what.. did I get sold empty cartridges since they weighed closed the the "empty" cartridge. So I thought there was something else wrong. So coming across this video was a $$$$ saver. I wish I found this video 5 years ago... no telling how much $$$ a wasted on cartridges that weren't really empty. I like Brother printers, this printer has been great for the most part. Better than Cannon, Epsons, and Samsungs that I had in the past... but Brother needs to fix this. Either have accurate toner readings OR don't hide the reset ability. Thanks again Charles !!!! Have to make sure I saved this video so I don't forget who to reset when this happens again.

[@DivinePurposeIntl]

FANTASIC HELP!! AND YOUR OTHER ONE, TOO; ABOUT BYPASSING THE COLOR TO USE ONLY BLACK AND WHITE!! Really saved my situation!

[@MarioSaccoccio]

Wow! This was a "life-saver" (not really, but you solved my problem!) I installed a new cartridge, but it still displayed empty. Thank you! (please excuse the lack of a closing parenthesis.

[@connieh2775]

Thank you so much! I thought that the cartridges that I was sending back still had significant toner in them because they didn't weigh much less than the newer ones. I always choose, "save ink and toner" on my print menu, but since the machine is only counting sheets, that means I'm sending back unused toner. I found your video clear, easy to follow, and most helpful.

[@chestervaldes7551]

Isn't STR starter, vs STD which I would think was standard? Not that it matters much, but it probably means the toner level indicator will go down faster.

[@jawbrekaa]

Thank you for explanation.

[@chaturbhujbhojwani6117]

Thank you Thank you so much for this video it helped me lot and fixed my issue. Thanks from Washington DC usa.

[@JimiCSt]

Thanks so much. This saved me a lot of time. And it will likely save my employer a lot of money. Greatly appreciated!

[@yadwindersingh9606]

Nice I did on my printer save me some money that all on half when I did reset all come on full thanks for video and thanks for save me money god bless you brother

[@shirleyyong5136]

I get a message “put the yellow toner cartridge back in” it was already in. What should I do now?

[@Claudie-y3e]

J’aurais aimer tomber sur ce vidéo avant d’avoir acheter une tonne de cartouches 🤦🏽‍♀️🤦🏽‍♀️

[@karachipropertyinvestment]

Thanks it works

[@olentine1]

I had just put in a new cyan toner cartridge that wasn’t registering. Thank you!!

[@sistolepi]

For it to work, it is important (ESSENTIAL!) that the 5-second press on the asterisk button place (*) is done while the red light on the cancel button (X) is still on.

[@leilacorpuz6312]

IT WORKS, THANK YOU

[@vijaymavji3043]

so what does the reset actually mean ? does your toner catridges need replacing or not ? and if there is a bit of toner left then how do we know its run out?

[@BobOnTheJob1]

How do I know when they really are empty ? I am partially color blind so while I will notice the black getting dim, combinations of other colors changing may not be apparent to me and even if I do detect a change, I may not know which toner is causing the deficiency.

[@Boom-dd8th]

Very helpful worked perfect thanks

[@gtopag]

Thanks brother!! You're a legend!!

[@aptpupil]

doesn't work if display says to replace toner already

[@AndrewBetts]

Thank you so much! I had a new cartridge that worked fine but still said it was empty (brand new out of the box) and this trick fixed it.

[@kisiekat]

THANK YOU SO MUCH!!!! :)

[@markr6754]

Thanks for sharing this. I read other sites that said to hit the * key...but I could never find it. I purchased a new toner set from Amazon and it wouldn't recognize the replacement. Followed your instructions, reset the Black (need to re-insert my original and just reset it for longer life). I'll keep my replacement toner cartridges and cancel my return. Save me big $$$. Thanks.

[@nammai3031]

Thank you so much You help me very good You continue God bless you

[@abdulkareebaka3501]

DCP-L3551CDW reset Waste toner T-223CL ?

[@svetlanas688]

Thank you very much! It works!!!⭐

[@anitathomas8208]

Worked perfectly!!! Now it doesn't feel like we're getting ripped off by changing toner when there's still life left in them!!

[@TeresaTurnerSoWalRealEstate]

It worked! Thank you so much!

[@adriankaiser1960]

Super Anleitung, hat sehr geholfen,....danke sehr

[@tompetty3742]

I just bought this printer for 25.00. Followed your instructions. Did a test print, and now ready have a printing party. Thank you! Signed new subscriber

[@MarioSaccoccio]

You sir, got a great deal on a great MFC printer. I've had mine for about 10 years & it works great!

[@tompetty3742]

@@MarioSaccoccio I've had to invest quite a bit since then, but still worth it! I've done all the work myself. Replace the fuser and eject sensor, new drum units in route as I write this. love the printer

[@b90wm8994]

I think you may have mispoken on the cartridge designations. I believe it goes more like this.... STD= Standard HC= High Capacity STR= Starter

[@zamadunia7846]

Thanks it was an Easy solution

[@andrewfreeman88]

I think STR is for Starter Cartridge and STD is Standard.

[@jaapdebeer2528]

Thank you!

[@vaclavkydlicek3011]

Thx a lot!!!

[@AvnerMoisBenMoshe]

תודה רבה על הסרטון❤️

[@nicolasperez9353]

I had a new toner stored a year ago, and the printer forced me to change it because it was empty, apparently it is stuck in "no toner" or "replace with new". I put in the new toner, and it didn't work, nothing. I turned the printer off and on nothing. Perform this operation and voila! Thanks Sir !!

[@mishisme12]

great video thank you!!!

[@Deal-withit]

Legend!😃

[@lawrie9959]

100% worked for me - good video, short and to the point No BS, Thanks great Job. re Brother MFC-9330CDW

[@andykerr5368]

This is my first ever post re a youtube video, so the fact that i am giving a response is praise in itself. Before finding this video i tried user guides and lots of other suggestions found online. I find it almost criminal that brother try and force users to replace the cartridges before they have really run out. Whe i did replace the toner it would not acknowledge the new cartridge. reset toner levels did the trick. many thanks.

[@sarahsmith2387]

Oh my god! I was going to throw my printer in the garbage!!!!

[@smokva62]

Thank you !!!!!!! *****

[@patrickheld2217]

We've had this printer for 4 years now and are still on our starter cartridges for all colors except the Black. I just reset them for the third time last night, and I've been resetting it for High Capacity setting every time. Granted, we don't use much color, but this goes to show how useless the aspects on the machine are. And a major Kudo's to Charles for discovering and creating this video. The video is accurate, easy to follow, and Charles doesn't make any assumptions that a viewer might not understand.

[@robertmcneill5239]

Great, thanks!

[@ollywhittington804]

This is amazing. It will save my business about a thousand £ a year. Thanks so much

[@tinad6682]

Thank you!!!

[@agentchadillac]

Pure Gold! 🏆

[@beatriizsoto]

Thankkkkkkkkkk youuuuuuuu!!!! ❤️

[@jessicaann4374]

THank you!

[@margaretritenour4664]

Great video. resetting the toner worked just like the video steps. Thank you

[@hikerdude7578]

Thank you!!!!!! Was SO annoying getting that message every 2 minutes. Worked perfectly on my 9330

[@HeyMsVal]

Thank you!

[@kirktarver4176]

THANK YOU!!!

[@leimdog]

Absolutely amazing Charles B! I'd heard this was the case, but couldn't find out how to reset it until I found your video. Thanks!!!

[@LuisFlores-yc2oi]

thanks i did same thing on the brother 3180cwd thanks for the helping

[@tarickmullin721]

Thanks alot sir, this helped so much. Thank GOD for you sharing this video.

[@bluepawn]

Works great ! thanks... I did for all STD toners... done.

[@vernandor759]

Great

[@normhardy]

Thanks for the helpful instructions. Much appreciated.

[@kelw919]

This is the only reset that actually worked. Thank you!

[@yevgeniyosipov8917]

Thank you!

[@miapalo4540]

Hello, MFC-9330cdw 'cover is open. close the top cover...I know i have closed it but it still doesent work. What is the problem? Thanks.

[@patricehache7088]

merci

[@darren-harmon]

Thank you for this video, saved me in a jam!!

[@drewz523]

Thank you! This was so helpful. I had to fix it so that my son could copy something he could have rewritten in this 5 me minutes!😡😎

[@donnadavidrealtor9523]

This was a life saver just now! Thank u!!!!

[@drysdada]

Awesome my friend! Thank you!

[@GeniesfavproductsBlogspothk]

Thanks so much!

[@6andrew2]

Brilliant. Thank you

[@stevenl3945]

Thank you so much! You made my day!

[@jaclynconstant6158]

Cannot say thank you enough!!!

[@jimmytai1915]

Thanks 🙏🏻

[@martindoak4574]

thanks mate, worked a treat

[@cycloxalotl8015]

Worked great, thank you!

[@raystallings3432]

STR is NOT Standard size. STR is for the STARTER cartridges that come with the unit when it is new. STD is for the Standard size.

[@empresschanelle2718]

UNFORTUNATELY didn't work for MFC L8900CDW But it is a different model

[@carpintero102]

You rock 🤘🏽👊🏽