How to reset

[@AlistairErskineMD]

Finally - someone with the RIGHT information about how to reset a Liftmaster. It took hours to find it, but saved me days of frustration. Thanks for sharing!

[@markpatrick3047]

I've tried 5 different reset sequences and this is the only one that work. Thank you lil lady.

[@ElleeGirl]

I am forever grateful! We moved into our house 8 months ago and we are finally able to master reset the garage door opener! We can actually use the MyQ app to open and close now!!! Thank you for posting!!!!

[@tasloc]

Over a year not being able to use the app and I finally find a video that actually worked for me Thank you much!!!

[@Cheremieful]

Same!!

[@gl35]

Thank you. This was the most accurate, clear, and to-the-point instructional video on how to re-program the wifi on garage door openers. It worked for me.

[@chitosesenri7087]

To just reset wifi, you hold the green rectangular button for about 6 seconds until the green light is off. The green light itself is for wifi connectivity. If off what means that means wifi is no longer connected. And you do the setup again. No need to fully reset.

[@compxx3971]

BOOM! This is exactly what I needed.. Glad I read through the comments, I did not need the hard reset, the green button worked and had the garage working on the app in 1min. Thank you!

[@hughmungus3415]

This helped. Thank you!

[@farmallhfan]

You have the most informative that I’ve seen so far. This new garage door opener has had me pulling my hair out today.

[@warrenmeyer880]

MyQ app would not connect to internet until I used your reset, then setting up myQ worked fine. I think my problem started when I upgraded my router/modem (for faster speed), then the myQ app stop working and could not be reset (learn) to the garage door opener. Thanks for the tip.

[@Cheremieful]

Thank you!!!!! It only took me 206 days to find this video 🤣😂…but wow yours was spot on!!! Thank you I am back in business!

[@GuitaristJLN]

Awesome video, worked for me and was finally able to set up my garage door opener to work with the app after 6 months of moving into my new house.

[@SpencerL01]

This helped me a lot. I got it connected after the hard reset!

[@ObiWanaSmoki]

This worked for me! Thank you for posting, the manual for device doesn’t say this!

[@ucukaoma4551]

Great information! Please latch the safety on that ladder before getting on it... Please...please

[@sadrettincali2144]

Omg! Thank you so much, I was loosing my mind. Great help, appreciate you!

[@Tikadz]

I love you I am doing this in chicago it's freezing 🥶 and I was frustrated and determined thank you soon much

[@officialnotonlyjames]

hey! im in the houston area, do you do baytown? I know some parts are considered houston and some arent but I need service for my liftmaster and I want to replace my garage opener. Thank you!

[@rubenrivera1010]

Thank you so much I spend 1 hour trying to reset and finally decided to look up for a video and found yours 💯

[@srinikvs]

Does it works for Wi-Fi reset as well? And remove the old owner account from device?

[@AmericaOverheadDoorsLLC]

yes!

[@srinikvs]

It did not work. May be this model is different

[@qihaoyun3643]

@@srinikvsany help with how to remove old owners and reset for new one

[@ricoburgos5465]

Mine says I have to log in to alarm company Wich I don’t have anymore . But I bought my house and door opener was new before I got a alarm system I have a different one now will this work to reset the whole thing

[@roberttalbot313]

Thanks so much for the information.

[@darrylpolite8722]

After following these steps to clear out the wifi password, what do we do next to connect to the new WiFi?

[@thinkaboutit1439]

Good video ! My Liftmaster has the MyQ symbol, but not the WIFI symbol. What does the MyQ mean without WIFI?

[@jake90770]

Means that your motor is not wi-fi ready is just compatible with myq so you'll need to have a lifmaster internet gateway connected to your router and added in your myq app

[@Joe-id2ns]

Worked to reset. Now to program.

[@frankbonet8101]

How can I do a factory reset? I rather that than going through the whole process of pressing buttons that led don't turned on, or not even getting the beep sound out of it. Is aggravating. Thank you,

[@sammieseoul5544]

been struggling on this for a few days now.. I will try this suggesting.. wish me luck

[@user-ng1ol2ny7o]

Luck

[@carolgirard3158]

So after you reset the opener, how do you reprogram it?

[@Sami-rp7mf]

Thank you. I gave reset the controllers. My garage still keeps opening randomly. Any ideas

[@kumarp5740]

Thank you it worked 💪

[@eduardosalinas5318]

Buenas tengo un control clicker. Pero no lo puedo programar con mi Gate. Espero me puedas desir como asérlo. Grasias.

[@junp4036]

I still have hard time to connect to wifi from the opener, i have two beeps but it won't connect to myQ app

[@Gymjb5]

Thank you

[@frankbonet8101]

I'm having problems with mine, I followed the recommended steps but it does not make the beep sound. I have not been able to have the garage door open with our remote controls neither from the one outside of the garage. WiFi in the house is running perfectly, the app was doing ok, but now nothing is working properly with the garage opener.

[@BigDogRoy]

Will the wires contractor still work after the reset?

[@juanmarcos661]

Buen día me pudieras orientar que clase de grasa puedo usar en los engranes de plastico del motor chamberlain quiero hacer mantenimiento y quiero saber cuál grasa utilizar te agradecería tu asesoria

[@baomichael]

Still didn’t help you skipped all the processes

[@ojayojeda2846]

Lifesaver

[@wadafruit]

The problem I'm having is that my LiftMaster is still connected to the previous owner's email. So when I download the MyQ app it doesn't let me go any further so how can I do a complete full reset of the whole LiftMaster.?

[@ucukaoma4551]

This is exactly the same problem am having. Have you found a solution?

[@wadafruit]

@@ucukaoma4551 Nope, I quit. If I feel inspired I'll try to invest time to figure it out or just hire a garage person...

[@ucukaoma4551]

@@wadafruit kzbin.info/www/bejne/aIqnY6RjYraieK8si=U9qoh-K1DHodh-GJ

[@patrickpierret2903]

What happens to my link connections in my car.

[@berniesemark6271]

I tried this 6 times in 2 days and it never worked while other devices found my wifi immediatley but my mq app on my phone will not

[@shawnrossi6364]

Make sure you don’t have a auto vpn on. Disable it during setup

[@bethr1468]

Help, I did it and now my app doesn't detect the motor😢

[@CharlesNolanArt]

Ahhh but what if the wall opener goes dead? I have done everything I could find still nothing.

[@elfronterizo219]

Esa escalera estaba mal armada

[@markchavez7707]

Y si. Que peligro

[@mapexmac]

Thank you for the reset info, but for the sake of your own safety - PLEASE - learn how to properly set your ladder!! Your hinges weren't safely fully extended, and that could potentially lead to the ladder's instability - and you falling (injury likely).

[@tikman317]

🤣😂🤣😂🤣😂🤣😂let's make it short pls....Press & Hold the ""GREEN SQUARE"" button for 5 secs to reset

[@susancross5770]

Don’t need history. Just facts.

[@thegoods9317]

Bro, your ladder wasn’t locked out

[@Bbbuddy]

Says nothing about wifi

[@MrZonaave]

Tried thoughs steps, yeah didn't work. Back to the web for help

[@AmericaOverheadDoorsLLC]

Hi, this is Lilly! Try again. If you have this opener it should work! This is not a tip, it's the official instructions for the opener.

[@tonydebusk1211]

??? You didn’t use WiFi to open door. You used wall controller to open door…

[@adventureking6324]

Didn’t work for me

[@leelucas690]

Didn’t help at all

[@spanky08001]

Incomplete video. No help

[@mikebroom1866]

For anybody who wants the real answer: kzbin.info/www/bejne/gV7SpqSmlseoi9k

[@fabian70890]

Thanks a lot for helping out!!! Thanks a lot