How To: Resin 3D Print a Alpine A110 Scale Model kit

‪@Creality3D‬ #3dprinting ‪@AlpineCars‬ #a110
Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Creality Halot Mage S:
store.creality.com/eu/product...
UW-03:
store.creality.com/eu/product...
3D Files for The Alpine:
cults3d.com/en/users/3dvm/3d-...
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at [e-mail]
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by KZbin Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

[@richardstinchcomb5604]

I like learning more about the 3D printed kits. It’s something that I will end up trying. The details and the tips you discuss are very helpful to me as this is a very specific type of 3D printed project. 👍🏻

[@adamkwiatek318]

Awesome! I always wanted to see a resin-printed model kit put together. Thank you for this video and definitely build more of these!

[@Verygoodfeel01]

I like to see the car build like on your regular videos.

[@justinmurphy2227]

I've seen some of your other creations so, YES! We want to see this exact same model taken to high standards of quality! It is truly amazing how far these printers have came in the last 3 to 4 years along with their affordable pricing. I also love how the companies have take the cell phone approach when it comes to budgets and models offered. Most of us can find a printer that is able to worked into just about anyone's budget. Eventually, if you were purchasing models, you're gonna break even and then start saving money. Not to mention being able to adjust the scale and event print models that are no longer produced and make one's that never were. As I learn my FDM and resin printers better, I'm going to offer printing services for individuals that have their own files but do not want to get into the physical printing themselves. Just like I do not wish to paint the models for others. Like you, their are many others that excel in the finishing of these kits way better than I ever could! Sir, yours are outstanding! Do you offer start to finish services? If you do, I'd love to be able to list you as a contact for model finishing. I know I'd be honored to one completed by you! Thank you for this review and all of your other work. It help so many of us. Please know this as it's not mentioned enough. I've seen so many great "KZbinr's" vanish simply because they thought of their time here being a waste. I know time is money and you're not compensated near enough but please know, my skills (and others) are growing because of this channel. Thank you and I hope I get to see this beautiful car and model get brought to the next level. Depending on what scale you chose, I might have a light kit that I'd love to donate! It would be from an RC kit but I believe it would work with no problems. Sorry for the long reply! Thanks again.......Justin

[@TheScalemodelingChannel]

Hi justin, mine will eventually be done in 1/24. I do not offer custom build or painting services. Best of luck with your printing endeavors

[@KarlScaleModeling]

Very informative video Tom, especially to us all that still need to dig into the 3D printing world 😊 Thanks for sharing 👍🏼

[@munksgsr8060]

Yes more about 3d printing I would love to get into this. Been looking at different systems but there's so much out there and being a beginner is hard to tell what's good or decent for your first setup. Thank you and love this channel keep up the great work

[@ScaleModelExperiment]

This was a good video Tom, I also print kits using my 3d printer but didn’t think there was an audience for it on YT. I guess there is…

[@justinmurphy2227]

Oh there sure is! Especially Sci-Fi ship model builds. Even videos showing just how to print the model itself are highly sought after by the DIY community. Most have their own interpretation of how one would be painted so there's a DIY audience out there that simply wants to figure out the printing side of it.

[@user-tw9jg1wm6l]

Hello! Nice kit! I think you can use clear parts’ files to print the templates to drag windows etc using thick film or 0,7 mm plastic. Just templates need to be polished. Best regards, Alexander

[@verovieira1]

3d archive made in Brazil, excelent.

[@llsantosll12]

sério?

[@3Dsjk]

I would love to see a video that shows what it takes to smooth out the layer lines on a body like that.

[@byNades]

Would love to see a full build! I have a resin printer, do you think using these prints would be good practice for working up to the higher end model kits?

[@TheScalemodelingChannel]

Is every kit not good practice?

[@MartasZLA]

Please do full build :)

[@davegoose]

Cool build. I think it would be a good video to see you go balls to the wall on a 3d printed kit. Bring it to your normal very high quality.

[@NYSMODELING]

Vacuum Forming Machine Power Former Heat Molding Tool w/Steel Balls Lab Equipment Is a good vacuum forming machine. I did the video on my Channel about it a while back. And it's really affordable as well!

[@fjucsorfrenky852]

link? :)

[@joshuadeaver05]

I would like to see you make a 3d printed model up to your normal standards.

[@JuanManuelTastzian]

Would love to see a more detailed print of this, with finishing, etc. I have a question though that I might have missed. If you want to build it in full (like with clear plastic for glass, and probably head/tail lights), is this something you can do with the 3D printer as well? Is it just with another resin? And also, did you print the wheels with the "rubber" resin or all the same hard one? Would really love to buy a 3D printer to do some cars, but I have so many doubts that I don't know where to begin to see what's good for me, resin, extrusion, etc? (eg, I would love to print custom 3D parts for Hot Wheels customising) And also safety concerns, ease of use... I really don't know where to start, so I just don't haha! BTW, I've been following for a while but just now noticed... are you Dutch? (because of your language settings in the computer haha). Wouldn't have noticed before, but I moved to NL a bit over 2 years ago :D

[@TheScalemodelingChannel]

You can print clear parts. But they will never be as clear as one would like them to be. So for those parts vacuforming would be a better solution. All parts were printed in the same hard resin. I indeed am Dutch

[@JuanManuelTastzian]

@@TheScalemodelingChannel thanks a lot for the insight!

[@madmel8t6]

Found a hobbyist vacuformer on Amazon. It’s small, area is small, but seems it would work for the “glass.” It’s called “We R Memory Keepers Mold Press Machine.” Only $83, forty sheets of thermoplastic is roughly $40. You supply the vacuum. I input a link, but then my comment got deleted. I ordered one, hasn’t arrived as yet.

[@orlandocalrissian9654]

Same here, I commented with a link to that same vacuformer, but it got deleted. I’ve had it for a couple of weeks and it works for my customizing needs.

[@madmel8t6]

@@orlandocalrissian9654 yes, looks handy for what I need. When I began searching for a vacuformer, was shocked at how expensive they are. Saw one about the size of the “We R Memory” one and it was priced at $500. Others ranged from $1100-$2000. I’m hoping it works well for a hobbyist.

[@wadelangille2558]

Hi. I have the Halot Mage (the 8k one), I like the printer and it does print well but I feel like its not printing at its full capability. So was wondering if you could share your printer settings/chitubox settings so I can try them?

[@TheScalemodelingChannel]

I used the standard settings. Nothing was adjusted besides the layer height

[@zetabola1]

very good video, thank you very much, I am looking to buy one, but I can't decide between buying the pro or the s, what is holding me back is the fact that neither has power loss recovery

[@TheScalemodelingChannel]

@@zetabola1 do any resin printers have that?

[@wadelangille2558]

@@TheScalemodelingChannel its that done on the printer or in chitubox?

[@zetabola1]

@@TheScalemodelingChannel aaagh, I have an fdm that has it (and works well) and I normalized that a resin one would have it🤦🏻‍♂️

[@pierrededinard1957]

Great job! I'm enjoying making 3D models myself more and more and I'm glad you're enjoying it. I have a few built and to be built models from Andrey Berozdny. The biggest problem in fact concerns the glass parts. I hope you have some ideas on how to do this. I just tried the hot air torch... Not great!😁

[@CounterStriker013009]

Why not share to other youtuber to make the video for MF GHOST

[@TheScalemodelingChannel]

Sorry, what?

[@MotoMUSEUM]

doing it wrong. You should have: 1-better washed the resin (one dirty wash + one clean wash), 2-remove the supports while dunking the parts in very hot water, 3-dry the parts, 4-remove the supports.

[@TheScalemodelingChannel]

You’re commenting wrong. 1. Watch the video before you comment 2. When trying to give “tips” check if this was not shown and discussed in the video I explained all of these points in the video

[@Jimmy-zg3xp]

Yeah honestly the video is quite good, no need for additional “tips”