How to Restore Faded or Oxidized ATV Plastic - Fast & Cheap

  Рет қаралды 25,564

TopTier Garage

TopTier Garage

Күн бұрын

Пікірлер
@ChrisM0505
@ChrisM0505 3 жыл бұрын
Is there any no abrasive alternative to the 0000 steel wool your using? Thinking about my Honda’s red plastic with the stickers on it and how any grit of abrasion would ruin the stickers.
@dmo848
@dmo848 2 жыл бұрын
Wet sand and polish like a real man. This just makes it dull 🤣
@slickricktheruler
@slickricktheruler 4 жыл бұрын
Thanks for sharing. Here’s a tip that I’ve been using for years. SOS pads the kind with soap in-bedded in them. Scrub in a tub of water until clean. Then heat them up with a propane torch or heat gun then dowse them with water immediately. The result will be shiny new looking plastics.
@toptiergarage7378
@toptiergarage7378 4 жыл бұрын
Thanks for the tip i will have to try that out.
@MichaelKeating-un7vx
@MichaelKeating-un7vx 27 күн бұрын
just get your buffer high-speed buffer or something of that sort get you some micro finishing compound go ahead and take the oxidation off in seconds and buff that thing and Shine the actual plastic . then go ahead and do the same thing with some wax afterwards it look like it came out of a showroom simple or you can use a DA sander with 220 on it either way
@craigrichardson8096
@craigrichardson8096 3 жыл бұрын
Using steel wool mars the surface "nubs" of the textured finish on the plastic. Making it less shiny. I use a microfiber towel....it gets the same result and retains the natural surface texture.
@donniemurley8812
@donniemurley8812 Жыл бұрын
I did this treatment but got some thick spots like runs and it's tacky to the touch is the anyway to strip the linseed and thinner off to start over
@JustAGuy781
@JustAGuy781 4 жыл бұрын
Guy you are suppose to press down as you turn the lid on the containers. Same as with a pill bottle.
@duanethieme4186
@duanethieme4186 2 жыл бұрын
Sometimes they put those caps on real tight, it also looks like some dried residue on the threads,.... and those safety caps don't have much gripping power.
@putranamr8662
@putranamr8662 4 жыл бұрын
That linseed oil sometimes doesn't mix with thinner after we combine it and shake it, any sugestion sir?
@toptiergarage7378
@toptiergarage7378 4 жыл бұрын
Is it Boiled linseed oil. That's very important. Just regular linseed oil won't work.
@paulrichards1011
@paulrichards1011 3 жыл бұрын
Wont the steel wool leave scratches?
@toptiergarage7378
@toptiergarage7378 3 жыл бұрын
Not if you use 0000 ultra fine steel wool. Any other type will.
@mrstevek118
@mrstevek118 7 ай бұрын
I have to do the hood of my side by side. It’s going to take a long time
@veggiepowered
@veggiepowered 3 жыл бұрын
I'am Your Newest Subscriber Great Videos. Other Videos Say 60/40 ?
@LeafpileTV
@LeafpileTV 3 жыл бұрын
Ever have an issue where when you're done it feels all gritty and sticky. I've even washed my quad with dawn and still gritty and sticky. :( lol
@austint5672
@austint5672 3 жыл бұрын
Try carb cleaner
@roadstar499
@roadstar499 3 жыл бұрын
i wish you had a side by side picture of after one treatment compared to after 3...it seems the same frome your video and you never mentioned after 3 looked much better than after one.... its hard to tell from video verses being there seeing it...thanks
@toptiergarage7378
@toptiergarage7378 3 жыл бұрын
After 3 was much better. Took almost all of the embedded dirt and minor superficial scratches out. I will be posting a video of the complete rack restoration and you can see the difference compared to my video when I first got it
@roadstar499
@roadstar499 3 жыл бұрын
@@toptiergarage7378 i just did my truck and car i just bought... just used a cotton rag and rubbed...my truck is 20 years old outside in sw florida its entire life and all the rubber and plastic looks new,,,amazing i wonder how long it will last and if water washes it off... ??? even if its a month its a huge win... what i think happens the rubber and plastic soaks it up like a sponge... since rubber and plastic are oil based products..
@toptiergarage7378
@toptiergarage7378 3 жыл бұрын
@roadstar499 Glad it could work for you. Mine has been holding up for a while now. I would assume if you do it once a year it will stay looking brand new.
@billyralston5291
@billyralston5291 2 жыл бұрын
thats what i was trying to see
@roypeterson5430
@roypeterson5430 2 жыл бұрын
Put a coat of transmission fluid on the plastic, let sit an hour or so then wipe off with a clean rag. works great and will last up to a year.
@roadstar499
@roadstar499 3 жыл бұрын
what about linseed and laquer thinner ?or linseed and acetone? or linseed and mineral spirts??? anyone try these mixes??? thanks
@jeffnations6649
@jeffnations6649 3 жыл бұрын
I heard 60/40??
@wackadakka3134
@wackadakka3134 Ай бұрын
the wire wool is a BIG mistake
@jeffnations6649
@jeffnations6649 3 жыл бұрын
Still looks dull
@nandansho
@nandansho 3 жыл бұрын
Hey kids don't do what this guy does, wear gloves.
400ex/416ex Budget ATV Build. How To Refurbish Plastics
20:40
GarageMC
Рет қаралды 2,9 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
How to repair damaged clear coat AT HOME! with SPRAY CANS!
13:36
⚙️Homie Hektor⚙️
Рет қаралды 6 МЛН
Restore Faded Plastic Trim Penetrol Vs Boiled Linseed Oil
7:23
PeanutButterMan
Рет қаралды 230 М.
How to Restore Faded or Oxidized ATV Plastic - Fast & Easy
9:01
kessingm
Рет қаралды 1,5 МЛН
How to Repair Driver Seat Foam using kitchen knife and Tapered Grater Home-made DIY.
22:57
Permanently Restore Faded Plastic and Make it look NEW AGAIN! E.3
8:23
When to Polish vs Compound vs Wetsand
19:08
AMMO NYC
Рет қаралды 4,6 МЛН
Like-New!? RESTORING ATV & DIRTBIKE PLASTICS
12:48
NOURSEPOWER
Рет қаралды 15 М.