Thank you for sharing the product and instructions. I’m buying a used top and hope this helps.
@RonRicco Жыл бұрын
Countach causally in the garage 😅
@OceanDriveSpeeder2 жыл бұрын
Helps to use on inside glass too.
@BruceHanson-h3c11 күн бұрын
How about a review of Mopar’s plastic glass cleaner?
@TravelerBrad4 ай бұрын
Should I remove the windows and do both sides?
@PhillipsVision4 ай бұрын
@@TravelerBrad you can, but usually it’s the exterior that gets messed up
@CasperTheFriendlyGhost7779 ай бұрын
Need to try this can you ploish using a machine low speed ?
@lorrainesands23642 жыл бұрын
How often should you restore the windows
@PhillipsVision2 жыл бұрын
Whenever you start to see the clarity fading
@DerekGH Жыл бұрын
How about cleaning the inside of the windows, same procedure?
@PhillipsVision Жыл бұрын
That would also work
@kvsmile2 Жыл бұрын
Is it safe for dark tinted plastic windows?
@PhillipsVision Жыл бұрын
This is safe on any soft top windows. If the dark tint is due to applying aftermarket tint to the factory plastic windows, I’m not sure what effect it could have. You probably want to reach out to the manufacturer of the polish.
@byd3k1572 жыл бұрын
Hi, I tried this but…. I can’t seem to get the windows clean. It’s as if the dirt is baked onto the plastic. I tried chemicals for vinyl window cleaning, natural dish detergent (tiny amount), car wash, and still no avail. I’m guessing carbon, tar, and dirt is baked on. Thank you in advance for any tips.
@PhillipsVision2 жыл бұрын
If it’s too bad you may need to replace them
@nseneliso2 жыл бұрын
Philips I am in South Africa where can i find this product, please please i need it, how long does it take to clear my plastic after after application
@PhillipsVision2 жыл бұрын
Check eBay or Amazon
@nseneliso2 жыл бұрын
@@PhillipsVision thanks my leader
@cattoymaker19 ай бұрын
What happens if its applied in sun light
@nseneliso2 жыл бұрын
Can it work for audi vnyl roof 1995
@PhillipsVision2 жыл бұрын
If it has plastic windows...yes
@MrBoomStick Жыл бұрын
That product is crap. Use Meguiars plastic polish first. It uses micro abrasives and is designed for optical plastic. It will do to the windows what a clay bar and polishing compound do to paint. Then apply your preferred ‘armor all’ type protectant. Use a microfiber towel to buff away all the excess protectant. It takes a little effort and a few passes using a clean section of towel each time. When all the smears and smudges are polished away there will be an invisible layer of protectant that acts like wax on paint. The results will make you throw away the bestop stuff.