How to RESTORE Your CORK HANDLE Fishing Rod | Make it Look NEW!

Here’s how to Restore your cork handle fishing rod with a little sanding and wood filler to make it look new again. In this "How I do it" video, I'll show you how to restore your old cork handle fishing rod in under 45 minutes.
1. The first step is to lightly sand the entire cork handle to remove surface grime, and any loose, or chipped, cork.
2. Then, clean the cork handle with a wet magic eraser, followed by a damp microfiber towel. Let the damp cork dry
3. Next, tape of any areas of the fishing rod handle that you don't want the wood filler to come in contact with.
4. Generously apply the wood filler, covering the entire surface of the cork handle. Let it dry. Directions say 15 - 20 minutes. I gave it 30 minutes.
5. Sand the surface smooth. Start with 80 grit to remove the rough stuff. Finish off with 120 for a smooth surface.
6. Finally, wipe it down and you're done.
Be sure to Like, Comment on, and Share this video for a chance to win the rod and reel featured in this video, plus a $100.00 gift certificate to www.cpflures.com - I'll announce the winner on October 31, 2020.
If you like my "How I do it" videos, please give me some suggestions as to what you'd like to see in the future. Thanks for watching!
Related Videos:
Humminbird MEGA 360 Imaging: • Humminbird MEGA 360 Im...
How to Fish a Fluke - • How To Fish a Fluke - ...
How to rig & fish a Texas-rig Worm - • How To Rig a Texas Rig...
Best Frog Lure for Bass fishing - • Best Frog Lure for Bas...
How to fish an Umbrella / Alabama Rig for Bass - • How To Fish an Alabama...
Best new TopWater Lures for Bass Fishing - • Best New Topwater Lure...
Please like, share, comment, and subscribe! I've been a full-time bass fishing guide & tournament angler for over 20 years. I'm on the water over 300 days a year. I've fished all over the country, and have fished with anglers from all over the world. I share fishing tips and techniques, and make videos for Bass fishermen of all skill levels. Let me know what you think of my videos, and feel free to give me some ideas for future content.
Lures we used in this video available at: www.cpflures.com
Check out Fishing Sim World! Available on PS4, Xbox One, & Steam: bit.ly/FSWProTour
Where to BUY THE PRODUCTS I use for my KZbin channel:
KZbin Channel: bit.ly/2xeuZxj
Website: www.chucksguideservice.com
My Other Website: www.guidefishing.com
Instagram: / chuckipippinfishing
Facebook: bit.ly/2vO7JIu
Chuck Pippin Jr.
Chuck Pippin Fishing, Inc.
#fishingrod #restore #howto

[@ChuckPippinBassFishing]

Sweet Giveaway at the end! Thanks for watching.🎣

[@chasintails2179]

Who got it

[@rickvoigt8720]

For those that don't like the look of the wood filler, try this. Take some old wine corks and either put them on a grinder with a collection tray underneath to catch the ground up cork. I don't have a grinder so I cut up pieces and put them in a mini food processor to grind them up to a fine mix. Mix with wood glue and fill your spaces with that compound. It looks much better and will absorb sealer. I like the u40 cork seal BTW.

[@redneckgirl3326]

Thank you. My father died when I was 12 years old, more than 40 years ago. I have not fished since because it was something we did together and I got too emotional. I recently found one of his old fishing rods and I thought I might try it again.

[@ChuckPippinBassFishing]

Wow! Are you planning to refinish that rod?

[@redneckgirl3326]

@@ChuckPippinBassFishing In all honesty, I have no idea because I'm not well-versed in it. But you've given me inspiration.

[@drivesideways6550]

Love a Guy who works on his Wife's kitchen table, that's how I roll too.

[@ChuckPippinBassFishing]

😂

[@bowagoner9877]

I never knew you could fix the cork on a rod. I have some falcon rods that i've hade for 30 years and now looking forward to bring them back from the dead. Thanks Chuck.

[@ChuckPippinBassFishing]

Cool. Let me know how they turn out!

[@donaldmonk4346]

Looks great. I have a rod that’s in worst condition. I will use your technique. I heading to store to get the supplies needed on Monday. Thanks a million. Don

[@kao6095]

Great restoration video for those who have older worned out cork handle rods.

[@ChuckPippinBassFishing]

Thanks! I appreciate that. 👊🏻

[@user-mi9gy7iw8c]

Great video, will use it for sure !!

[@Tx1113]

Thanks for the information chuck I had a handle on one of my musky rod that was all chewed up so I did what you said I altered it just slightly I used Elmers golden Oak wood filler after it was all sanded and done like you showed it looks excellent What a difference the only thing I did after that was I took kiiwi shoe protectant like a silicone sprayed the handles to protect it from the water a little bit. Thank you for all the info.!!

[@ChuckPippinBassFishing]

Great info. Glad it turned out.

[@glennmcleod4751]

I'm 2 yrs late on this video...but it sure came in handy today ....Great video..

[@ChuckPippinBassFishing]

Thanks! I’ll still reply. Even to 2 year old videos! 👍🏻

[@fishinfanatic1]

Clever way to keep handles looking new.

[@ChuckPippinBassFishing]

Thanks Chris!

[@barclaysauers255]

I'm going to try this treatment on my St. Croix 'Tidemaster'. Your old cork handle looks great. Wife's favorite heirloom tablecloth from her grandmother, not so much! I

[@ChuckPippinBassFishing]

Lol. Let me know how it turns out. 🙌🏼

[@racerxv6valvoline424]

Chuck, I am a big fan of cork handle rods. Been using them for darn near 30 years. I like what you did and I will go home and restore my Berkley Lighting Rod. It does tend to get a little slippery when it's raining. Thanks for the video and thanks for what you do.

[@ChuckPippinBassFishing]

Racerxv6 Valvoline sweet. Let me know how it turns out.

[@fishermanferrara3697]

Never even thought about doing this . Well I got a new project for all my fly rods now

[@ChuckPippinBassFishing]

Thanks! Let me see how they turn out.

[@nickrosefishing.8992]

Love 13 fishing gear too! Have 4 set ups now, 2 casting, 2 spinning👍

[@1961fireguy]

Nice video and good info on keeping your cork handles looking new! I use cork sealer on mine and clean them at least a few times a year. It really seems to help keep them looking new. Thanks again!

[@chrisunderwood2119]

Good stuff Chuck. Never crossed my mind to refinish my cork handles. You have to stay looking good for your sponsors!!

[@joeperez8537]

Great job, my rod really needs it, I am going to give it a try, thanks.

[@markmuchetti494]

Thanks! Great video. Wondered how to restore the poles we have with cork handles. thumbs up.

[@c.w.1956]

Pretty Nifty! Thanks, I'll have to share it with my fb fishing friends.

[@robertmaloney567]

Thank you I have two rods I will be salvaging with your help.

[@ChuckPippinBassFishing]

Thanks for watching! Glad I could help 👊🏻

[@ronforeman5317]

That's how I roll.🙂 Going to seal some with U40 cork sealer and use that frog tape. 🎣

[@FLAGATOR49]

Tricks of the trade make for great videos!

[@benjaminyang5872]

Amazing! Thought it be harded but you explain it perfectly.

[@bassnbrim]

A well done video. Many thanks for it!

[@petersuddath6477]

Great video, very informative!

[@Eyesofthasouth]

Good info brother. Sweet rod, I usually clean and put a light coat of mineral oil on my rods. Will definitely check this out! Thanks

[@ChuckPippinBassFishing]

I appreciate it. 👊🏻

[@sixgrigsby8615]

Almost no one does this how I do it type of series or tutorials so they are great this one was just on time I have a pole that I was working on already so now I can apply this to the cork handles

[@ChuckPippinBassFishing]

Thanks! Maybe I need to do some more, “how I do it’s”.

[@tjnorton100]

Nice video chuck, be good to see a reel service video next perhaps?

[@ChuckPippinBassFishing]

Ooh, I’m sure a lot of people would have some opinions on how I clean & service my reels. Lol

[@Muzzup]

Great videos thanks chuck

[@toddbullin7344]

Good info Chuck, do more videos like this. Maybe reel, boat & trailer maintenance as well.

[@ChuckPippinBassFishing]

Thanks Todd. I’ll have a lot of boat videos coming out, especially next year.

[@brandonbonnell3691]

Great video Chuck! This video inspires me to do this to my rods this winter up in Indiana. Let’s see under water video footage of your new soft plastic baits.

[@ChuckPippinBassFishing]

Brandon Bonnell thanks. We’re getting some new baits in this week. I’ll definitely be posting

[@firebird4548]

Going to have to try this , looks good and pretty simple.

[@ChuckPippinBassFishing]

It was pretty easy, and not too messy. Let me know how it turns out.

[@kennethboydsr3966]

Great information !!!!

[@duaneimlay5680]

Liking the content, and yes how you do it are cool in addition to the fishing.

[@ChuckPippinBassFishing]

Thanks Duane. I should have a few more coming out over the next few months

[@theupstateangler]

Glad I found this video, I've got some cork handles to fix... I'm going to seal the cork after then put on some X Grip heat shrink handle grip afterwards... Hopefully they won't need fixing again after that... Lol

[@thomashardwick673]

That is a very nice how you do video. Looks good when done right.

[@ChuckPippinBassFishing]

Thanks Thomas. I appreciate it. Super easy to do.

[@getluckyfishing1060]

Very cool never even thought of that gonna have to try it!!!

[@ChuckPippinBassFishing]

Great! Let me know how it goes.

[@luisfco10]

Great vid, thanks for sharing the knowledge. Id love to see some reel maintenance videos if possible

[@ChuckPippinBassFishing]

Thanks Luis! I’ll get some reel repair videos put together.

[@mastersbaiters]

I got a couple of cork handle rods I might try that on, great video

[@ChuckPippinBassFishing]

If you do, let me know how it works

[@paintingmylifeaway9814]

That was very interesting learn something new today thank you very much

[@ChuckPippinBassFishing]

Thanks. 👍🏻👊🏻

[@nickrosefishing.8992]

Good video! I have a few defy black rods I want to do this to!

[@johnpoole7812]

Very good vidio. Trying it tomorrow thanks

[@jamesbarron1202]

I love these tackle care vids. I think I would fish it after the wood filler without sanding. As much as I fish I'd have the filler worn down to the cork in no time just from my hands. Sweet giveaway and thanks for the opportunity!

[@ChuckPippinBassFishing]

Thanks James. Same here. I could sand it down with my own hands in about a week.

[@tomaschristiansen8805]

Really helpful advice

[@macabee1955]

You made it look easy, Just as you do when you fish. Great tutorial. As always another fun and informative video. Looking forward to upcoming “how I do it” videos. Have you done one on how to replace the eyelets on a rod? Thanks again for sharing🐟😊

[@ChuckPippinBassFishing]

Thanks Connie. No, I have not done one on that. I was going to add it into this video, but thought I’d save it for another.

[@kylehill6035]

I’ve been wanting to replace the cork and a few rods myself , so now I think I’m gonna try this now, so that’s pretty sweet way to do it . Hopefully it will turn out as good as yours did, I may stain mine to make it all one color. Looks good though man

[@ChuckPippinBassFishing]

Kyle Hill give it a try. Let me know how it works out. 👍🏻

[@bryanmolla6976]

Nice Video I love How to's an this is great!

[@ChuckPippinBassFishing]

Bryan Molla Thanks Bryan! I appreciate it. 👊🏻

[@malcolmzoll7613]

Great great video

[@ChuckPippinBassFishing]

Thank you! 💪🏼

[@SaltySouL911]

Thanks gona redo mine as well

[@Iazzaboyce]

I varnish my cork handles with 3 - 4 coats of polyurethane and light rub down with fine (600+) paper. It looks good, feels nice in the hand and is easy to wipe down.

[@lvitch]

Way cool!! I have a couple rods that could use that!! Thanks!!

[@ChuckPippinBassFishing]

Hope the video helps. Let me know how it works for you.

[@kevinflabouyfishing5739]

This is a great tip, man saw that therapy vlog u couldn't get a word in seemed like... 🤯🤷‍♂️

[@ChuckPippinBassFishing]

Kevin flabouyfishing lol. I did a lot of listening.

[@jayferrell5849]

You just dropped someone’s soon to be née rod 🤣🤣🤣 great video as always!

[@ChuckPippinBassFishing]

Lol. Thanks

[@thereelhanz5218]

Love the content my man would love to see some more rod repair videos and did y’all drop the new thumper yet I’m ready to get some of them??

[@ChuckPippinBassFishing]

Thanks Corey! The thumper’s are just about ready to ship. We’ll be announcing them soon!

[@LBCAndrew]

You should probably wrap the non-cork areas with tape before sanding so things don't get all scratched up.

[@jacobhauki3156]

Nice

[@Fr3sh-Kush]

Would you recommend this process for concrete tool handles? I love a particular tool but they seem to spilt directly over the center of the handle overtime and wanted to know about a product that does great for strength/protection and is good in wet/sweaty hands. And who would know better than a fisherman! Lol Thanks in advance man!

[@michaelwright5550]

Day late on the giveaway but good info. Do enjoy the how you do it videos. Wouldn’t mind a good maintenance video. One question I have a 13 fishing fate black and to me the grip at the reel is a little small can it be replaced? Thanks

[@BerserkingGator]

Awesome vid as always Capt. I'll have to do this to my rods. How do you like that hook keeper? Pretty cool.

[@ChuckPippinBassFishing]

Glad you like the video. Yep, I do like the hook keeper on that rod.

[@BassHopesAndDreams]

How often should I reseal cork rods I haven’t found anything online and wonder how long it last on regularly used rods

[@ChuckPippinBassFishing]

I’m not sure. Cork lasts a long time. Can be cleaned and sealed several times.

[@amputation1333]

October 30th cant come soon enough. Definitely buying some thumpers.

[@MudPigChaser]

How old was this rod before the reconditioning?

[@johndebarros3892]

Hi Chuck , im new to your channel , i like this how to and also , what watch is that that you were wearing in the beginning of the vidieo please , thanks in advance !!!

[@ChuckPippinBassFishing]

Thanks! I appreciate it. Lol. My watch is an Armani X

[@markeiler9753]

I used some alcohol to just clean cork worked great try it some time.

[@jjseandxcefree]

wouldn't some stain help blend that filler into the cork better?

[@johnwhite528]

Im going to try this Chuck, how long do u think it's going to last.

[@ChuckPippinBassFishing]

Probably just as long as the original filling added by the manufacturer. It’s basically the same stuff they use.

[@mastersbaiters]

When are the speed worm Thumper Pros going to be available

[@ChuckPippinBassFishing]

Soon. Hopefully, next week or so.

[@user-co1bq4sq5m]

What about a rubber cork fan i rix rubber cork with anything

[@515danny]

Nice. I like these videos but every year there are new baits etc... I would like to know what you use during these transition times. I've been struggling lately

[@ChuckPippinBassFishing]

Same here. It’s always a struggle this time of year. I’ve caught a few big fish lately, but the numbers aren’t there.

[@melaniemurphy4824]

Love 13products

[@ChuckPippinBassFishing]

👍🏻 they’re the best!

[@jimbo0411]

looks like crap with the big white spots blotched in there, i tried it and came out the same like crap.

[@ChuckPippinBassFishing]

Seems like you did it wrong Jimbo. Thanks for the useless comment.

[@wedjr97]

I think I’d have taped before sanding.

[@Twangtown7]

Canned air is your friend

[@plantcitychuck2551]

Yea My cork ain't what it used to be

[@michaelstringly4138]

Sanding 101...you can't go from 80 to 220 in one step. Need to have another step or two before getting to 220.

[@christopherjames9843]

80 grit is way too coarse.

[@bethany192008]

I need boyfriend 💋💋💋💋💋💞💞💞💞

[@TheBlindkiller85407]

They sell battery operated ones.

[@archr610]

I'm sorry but that handle with the chunks of wood filler looks like shit.

[@caitlynjenner7207]

RUINED !!!

[@ChuckPippinBassFishing]

Thanks Bruce!

[@caitlynjenner7207]

@@ChuckPippinBassFishing ya i ruined my last rod too

[@caitlynjenner7207]

@@ChuckPippinBassFishing ya i ruined my last rod too

[@ChuckPippinBassFishing]

@@caitlynjenner7207 lol

[@jeanettelozano8025]

Nice

[@ChuckPippinBassFishing]

Thanks