Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅
@jessieboswachter5 жыл бұрын
Thank you for this video! I struggled a little but this is a good idea!
@chrismuller2136 Жыл бұрын
Great video thanks for sharing. Which tip shaper are you using I am looking for one like this, if you don't mind sharing?
@D.P.G4 жыл бұрын
The ferrule is machined flat. Use a blade to get any residual tip and glue off, never sand it.
@ewanthug913 жыл бұрын
yup. i never sand it. just use blade to cut off the old glue
@D.P.G3 жыл бұрын
@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video. This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.
@ewanthug913 жыл бұрын
@@D.P.G barry stark does mention about this ferrule thing, he said like u just said.. its machined flat dont mess with it..
@paulhanson57353 жыл бұрын
Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip
@jhonisestilingueesportivof3823 Жыл бұрын
Parabéns que marca é essa sola... Parece ser muito boa...
@DaveInBridport10 күн бұрын
Tape on tip is great idea...
@dipeshchawan25815 жыл бұрын
Sir nice tricks to re tip.which brand tip is it?
@subhanallah65 жыл бұрын
Ye shaper milskta ha ??
@yahiyausman67162 жыл бұрын
I am from Lahore tell me where we buy tip clamp in reasonable price or which one is better plastic or wood
@hibb1437 Жыл бұрын
where can you get this tip shaper
@satisfaction32192 жыл бұрын
Where did you get this cue from?
@kirank24483 жыл бұрын
Great video.Thanks for posting.
@KnawzR5 жыл бұрын
Great video, do you know where I could get a tool like the one you use to trim the tip down?
@FarhanEjazfpfu5 жыл бұрын
I make it myself. You can too its easy
@osamaiqbal25984 жыл бұрын
How you make this tool bro ? Omg
@simonbriggs6332 Жыл бұрын
Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not. Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart
@simonbriggs63323 ай бұрын
I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error. This method saved me from messing up a £5 tip. Thankyou for your video 👍👍👍
@stena_vlogs18 күн бұрын
Absolutely spot on comment, I couldn’t agree more!
@R4J43 жыл бұрын
SIR I WANT TO.BUY MY OWN CUE AND I'M BEGINNER FROM PAKISTAN WILL YOU PLEASE TELL ME THE PLACE FROM WHERE I SHOULD GET AND THE PRICE PLEASE
@slippyg19 күн бұрын
You got blue stains on the ash?
@allahkirehmatsenaumeedmath66522 жыл бұрын
I need shaper..how much
@ranaumar87342 жыл бұрын
bhai kis jag hy
@aakif106 жыл бұрын
Perfect.
@leemo432 Жыл бұрын
What is the purpose of the scotch tape ?
@TE_53349 Жыл бұрын
I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!
@yashwanthgowda34544 жыл бұрын
Can any one tell which cue tip is cheap and better
@shazibmehar62822 жыл бұрын
Awesome video
@f.a32024 жыл бұрын
what if i don't press the tip?
@zhanhongliu39215 жыл бұрын
smart way to glue the tip
@FarhanEjazfpfu5 жыл бұрын
Zhanhong Liu Thanks
@IslamicVideos09075 жыл бұрын
From where did you get this tip clamp (Silver one)
@osamaiqbal25984 жыл бұрын
Bro if u got answer please tell me I need tip clamp and tip shaper
@knutnskar67964 жыл бұрын
@@osamaiqbal2598 eBay
@rajdeepsingh79283 ай бұрын
Amazing job
@rayh13262 жыл бұрын
Have you tried the Bondic uv glue ?
@FarhanEjazfpfu2 жыл бұрын
I always use bison glue
@MuhammadImran-lg8li Жыл бұрын
Thanks you so much ❤️ brother
@mysmartwork6195 жыл бұрын
sui gas da chuly v thk kra lo
@ahsanbaya79063 жыл бұрын
Nice bro
@martinquinn33823 жыл бұрын
with a normal snooker cue, the ferrule is flat with the wood of the cue...
@pultikacangpulut5 жыл бұрын
Omin cue tip. Just like mine
@andysingletonefc5 жыл бұрын
What is the 2000 paper and where to get it ?
@shaillybhai0074 жыл бұрын
It is sand paper
@SalmanKhan-nj9yu4 жыл бұрын
Which sand paper is best that can be used in tip shaper, fine or thick sand paper ?
@FarhanEjazfpfu4 жыл бұрын
220 no
@zubairjawaid3 жыл бұрын
Meri cue per tip laga do gey aap?
@AmadeuTayarol-gb8cg8 ай бұрын
LIKE
@gulamhoosendocrat7091 Жыл бұрын
It was very, very dangerous the way you removed the tip from the cue. You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!
@TheJuice345 жыл бұрын
where did you get your tip shaper
@FarhanEjazfpfu5 жыл бұрын
I made it by myself
@shk.ahmadshahzad99245 жыл бұрын
cues 2 use plz tell how you made your tip shaper
@kingjay645 жыл бұрын
You could make by cutting a pvc pipe in half and pasting sand paper(fine grain) in the inside
@game4alaughman Жыл бұрын
@@FarhanEjazfpfu the tip shape is crap pal. 😢
@SYED-sf Жыл бұрын
10.07.. hear the sound..👉. pressure cooker theek krwa lo😂😂
@Mike.tyson_prime Жыл бұрын
You don’t put tape
@johngriffiths56824 ай бұрын
Why not?
@nedronez2 ай бұрын
Pointless centering the tip its bigger than the ferrule...
@k.a.k45253 жыл бұрын
Pressure cooker theek karwa lo
@demonic12593 жыл бұрын
Sui gas de chiulle thk kra lo cue dia tip lawa lo
@shanelippiett5257 Жыл бұрын
Put the cue on a flat surface and cut downward other wise expect to have a few stitches. Ffs
@dnbmania9 ай бұрын
8:24
@martynroberts19744 ай бұрын
Not the way to do it over time you'll ruin ur ferrule
@bishalbhaukajee43644 ай бұрын
y did u waste a perfect tip, could've shown us a tutorial with a worn off or a broken tip instead
@austinmoore16894 ай бұрын
Probably didn’t like it so replaced it
@lehrasibalinasir3 жыл бұрын
Because of the person outside, I now know that you're from Pakistan 😂😂😂
@FarhanEjazfpfu3 жыл бұрын
😂😂😂
@lehrasibalinasir3 жыл бұрын
Very nice video though! ❤
@FarhanEjazfpfu3 жыл бұрын
@@lehrasibalinasir Thanks bro 😊❤️
@ismailgul9066 Жыл бұрын
with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...