How to safely add/refill coolant - Chevy Cruze/Malibu/Impala

[@DIYwithMichaelBorders]

If interested in purchasing this project, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3Q6xI6P amzn.to/3VAtPZO 🧰

[@kennethhlavik8155]

Thanks Michael

[@DIYwithMichaelBorders]

@@kennethhlavik8155 You are welcome. 😁👍🧰

[@michellebabicz7065]

Michael, I love your posts! Just took care of my own antifreeze on my 2014 Cruze,, and I’m a 63 year old woman! Talk about empowerment! The only hard part was removing the little yellow plug. Lost my favorite chubby Phillips in the process, somewhere down the engine rabbit hole. Used a longer-handled Phillips and it worked OK; plug’s just in a bad spot. Your other instruction about making sure the engine is stone-cold before you begin is VITAL. You explain things so well step-by-step that even us old broads get it! Thanks again.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you reaching out to us. We love reading comments like yours michelle. Us DIY’ers need to stick together! Awesome job & hopefully you can find your chubby phillips. It’s always fun/rewarding...in a unique way...working on & learning something new about your vehicle. We are always here to help answer questions. Hopefully many stress free days ahead for you. Enjoy your week michelle. 😎👍🔧🔩

[@BrainclawVideo]

Hey, I just wanted to say THANK YOU to you for this excellent video. I'm no car expert, and It is getting cold now, here in Bucks County PA and my 2012 Cruze had no heat until about 10 miles into any trip. I followed your instructions and had heat within 2 minutes, saving me a costly trip to my auto repair guy. Much appreciated! Now I know to regularly check the coolant, like I do with the oil. I have owned mostly new cars, so this was never an issue, but the Cruze is 10 years old now. Thanks again.

[@DIYwithMichaelBorders]

Good morning, you are very welcome. Thank you for sharing this, many more helpful videos to come. Thanks for watching. 😎👍

[@liyaszelda]

hello i have the same problem with my car no heat before temperature is higher than 90 degree centigrade would you help to how can i solve this thanks

[@daniellipp2883]

I’m so glad that the 2012 and 2014 are virtually identical under the hood. These videos have helped me out a ton and saved me a bunch of money. Thanks a lot man

[@DIYwithMichaelBorders]

Daniel Lipp Awesome Awesome & thanks for watching Daniel & we are happy the video helped. We love reading comments like yours. 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@Cooper_013]

only downside on the 14's, we don't get that nice digital display of the coolant temp. just the gauge. and good ole GM engineered it so as long as the coolant is within the "operating temp range" it never moves. needle won't move up until the temp gets above about 245.

[@jamesmeredith1116]

@iseekthetruth as well with the 13’s. Luckily I have an obd reader that shows the temp on my phone so I just drove around with that running

[@andrewbelajac]

I have a 16 Cruze Limited which is a carryover model from 2015 and it’s the same.

[@asiantone7153]

I'm reading through your comments you recieving. The fact that you respond to just about everybody is a blessing. Ty keep up the good videos.

[@DIYwithMichaelBorders]

Tony Miller Thanks Tony, we appreciate that. Responding to our viewers is very important to us. 😀 Let us know if you have any questions Tony. Us fellow DIY’ers need to stick together. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@katherinemonroe6387]

Appreciate the step-by-step explanation. As I've driven a '65 Ford Fairlane into the year 2004 when I got my new car -a '72 VW Super Beetle. My experience is not an 06 Malibu with ECM, sideways engine- it makes my head spin. I agree with Michelle's post. I love how organized, clear & thorough you are and that you respond to comments and questions. Well done, Michael. Thanks!

[@DIYwithMichaelBorders]

We really appreciate that Katherine, just like filming these videos for the DIY community, answering your questions is at our highest priority!!! Never hesitate to reach out, us DIY’ers need to stick together!!! Enjoy your upcoming week. 😎👍

[@PeanutButa0407]

I wasn't sure what to do on the water outlet valve but after watching that video and this, the job was a success. Thank you and please continue to make more!

[@DIYwithMichaelBorders]

Drkstrplyr752 Awesome Awesome & thanks for watching. We are excited to hear you successfully completed your DIY project. You Rock! Great job! This is why we love KZbin. 😀 Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@bobh8689]

A friend of mine works for a GM dealer so I hit him up for some info. He stated that these 1.4s are real pain in the butt for cooling troubles. He gave me a trick to help move the air through the system. They put a funnel on the large line that leaves the resorvoir and fill the system ( which is the high point in the system ). They also use vacumm to remove air pockets.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this info. That’s pretty cool & is very effective we can assume. Any & all helpful info is greatly appreciated, thanks bob.

[@BlacBarbie83]

So my car was idling really loud and all of a sudden. I received a letter from General Motors about a recall on my engine and it stated basically the same issue it idling loud and that the engine can develop cracks in the diaphragm. I called my local Chevy dealership and scheduled an appointment and they said if it isn’t the recall issue that they would charge me $129 for the diagnostic. Three or four days later my car started overheating and actually shut off . I saw that my coolant reservoir was empty and I decided to Google how to properly put cooler in and found your video. The only thing that wasn’t helpful was the toggling through menu to find the coolant temperature . I did not have that option. I drove around for 20 minutes and the temp on the dash stayed as suggested. Thank you sir because my mom was like you need to get a man to fix your car. Technically I did through this video, but I did it thanks to you .🥰

[@DIYwithMichaelBorders]

Marquita Carlton You are very welcome & we really appreciate you sharing your experience. We love reading comments like yours. Definitely reach out to us any time you have a question. Us DIY’ers need to stick together. 😎👍🔧🔩

[@ruvec6828]

Thank you so much! I just got my oil changed last month and they normally always check the fluids of everything. So I never pay attention to it. For the past few weeks the fan has constantly been kicking on and even staying on for a long time after the car is turned off. But didn't think anything of it. Then all of a sudden last night was making this awful noise. Then on the screen it said shutting off the ac because of something. So I just turned around and went home. googled a bunch of stuff until google showed me this video. Ran out to the car and ofc it was completely dry. Today I followed all the steps you did and it's running just fine. Drove it a bunch today and the fan wasn't constantly on & shut off after turning the car off. I'm going to start checking it all myself instead of relying on the oil change people.

[@sandycane691]

Mine does the same thing

[@juneyshu6197]

My spouse is a master mechanic. But this 2016 cruze is not familiar to him, t y for your help. Fixing this awful cruze for our disabled neighbor, she will be so happy!

[@DIYwithMichaelBorders]

Thanks for watching & so happy to help. Let us know if you have any questions. Your neighbor will definitely appreciate you helping. 😎👍🔧🔩

[@gerardomendoza8416]

FINALLY SOMEBODY OTHER THAN USELESS ELECTRICAL CAR GUY WITH A CHEVY FRUZE THAT HAS GREAT VIDEOS! GOOD JOB KEEP THE GREAT WORK UP!!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate that & us fellow DIY’ers need to stick together! Enjoy your day Gerardo. 😎👍🔧🔩

[@dizzyoss2331]

ive been having problems with my 14 cruze and after watching your vids i learned a couple new things and also same problems as me which will save me money!

[@DIYwithMichaelBorders]

Welcome to the DIY Raptor Club. Definitely let us know if you have any questions as you work through your Cruze projects. Hope all is well. 😎👍

[@Cashtro777]

You just taught me how to do this on the fly after I had to leave my car overnight in a parking lot due to the engine overheating. Thanks man.

[@DIYwithMichaelBorders]

Eric Castro You are very welcome Eric & we are happy to hear the video helped. Bummer to hear you experienced this issue. Keep us posted on your DIY project, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jeanaquin]

Thanks for this video dude. My 2013 cruze is having issues overheating and I think has a leak somewhere (saw coolant on the ground). I’ll definitely need to address the underlying leak, but this video was so helpful in the meantime for topping it off. Thanks again!

[@JayScarim]

Thank you for this video! I was stranded at the gas station with an overheated engine and no idea of what to do.

[@DIYwithMichaelBorders]

JayScarim Thanks for watching & sharing your experience. That’s actually a pretty friendly place to be stranded. You can top off your fuel tank, walk right inside & purchase new coolant...& even purchase a hot dog & a coffee. 😀 We are happy to hear the video helped. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩

[@jaylacousins4490]

What you do

[@ThaGODwithin444]

Thanks mike I always look forward to watching your Chevy Malibu videos. I have a 2013 Chevy Malibu and it helps a lot!!! Thanks!

[@brodieriske6170]

Can’t thank you enough for this video man. Noticed my coolant was literally empty when I lost heat a couple days ago. Was able to refill the system correctly and identify the leak. Replacement parts are on order and you’ve saved me a ton of money. Cheers.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Happy to help. After the new parts arrive, keep us posted on your project. Enjoy your night. 😎👍🔧🔩

[@scottdavis7638]

Hey Michael, man thank you for your videos on the Chevy Cruze. I have a 2014LT model and it has been a pain financially. I just found your videos and had change out my coolant refill bottle. Thanks to you I was able to get it done correctly. Thank you for your help.

[@DIYwithMichaelBorders]

What’s up Scott, a massive amount of Cruze owners share that same unfortunate feeling and experience. We appreciate you sharing this and definitely feel free to reach out to us if you have any questions. Happy New Year! 😎👍

[@scottdavis7638]

Happ New Year.

[@DIYwithMichaelBorders]

@@scottdavis7638 😎👍

[@Lulu48]

Excellent step by step explanation. Thank you so very much for taking the time and putting in the work in its production.

[@DIYwithMichaelBorders]

Luis Hoyo You are so welcome Luis! Thanks for checking out the video and sharing your comment. We replaced old with new & all good from there! 😎👍 Keep us posted on your DIY project. Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs Oil Change: kzbin.info/www/bejne/gHPZdKuwnZJljcU P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0

[@dancurrier6421]

I have never seen coolant temperature on my dashboard before when you scroll through menu

[@dainatorres1322]

@@dancurrier6421 Tell me when’s it started😀😀😃🤣🙃😄🥲🙃😛🥰

[@arealious25]

Do you have to remove the bleeder screw if you're only adding coolant?

[@Guy1876]

You're or you are.

[@arealious25]

@@Guy1876 My bad. You are

[@saltrose333]

Thank you so much for your videos! I don’t really know too much about what to look for to properly upkeep my 2014 Chevy Cruze but your videos have been so incredibly helpful. Thank you for all of the detail and time you put into your videos!

[@DIYwithMichaelBorders]

saltrose333 Thanks for watching & we are excited to hear you’re enjoying our videos. Definitely let us know if you have any questions. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@kevonhess9983]

Lol oli99

[@hammerhead7676]

this is my only comment on a video ever. thank you. just thank you. you are a literal god among men. thank you.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We really appreciate you sharing your 1st comment. We are absolutely honored that you shared this. We are always here to help answer questions. Us fellow DIY’ers need to stick together. Keep in touch. Enjoy your night. 😎👍🔧🔩

[@katrinaamos1979]

When I turn my heat on the temperature gauge goes up. Once I turn the heat off the gauge goes down. I’m going to have my coolant checked. This video is helpful! Thank You for sharing!!

[@DIYwithMichaelBorders]

Katrina Amos Thanks for watching & we are happy the video helped. We are always here to help answer questions. Keep us posted on your DIY project Katrina. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@Zeek800]

I wish I had seen a video like yours back around 2017 when I changed the coolant on our 2012 Cruze. I followed all the steps shown in another video back then and I’m pretty sure I didn’t do one or more steps that you showed because about 4 months later the water pump started leaking. It cost me about $700 to have that fixed at a shop. On any car, checking your fluids regularly is critical . Even on a new car, have a look around every couple of weeks, check the oil level, brake fluid, coolant and if you have a Cruze, Sonic, Trax or Buick Encore, watch your video where you point out all the places to look for coolant leaks. The coolant reservoir where the two hoses come out, the plastic fitting on the drivers side of the engine, the thermostat and any of the hoses are places to keep an eye on. Someone, it may have been you suggested using the Doorman version of that plastic fitting on the drivers side of the engine because it has been designed to be “ tougher”. This isn’t always the case with Doorman parts but apparently in this part it is built better as well as that metal line that runs behind the exhaust manifold and feeds oil to the turbo. The Doorman one has two rubber O-rings on one end where leaks are common. I was told that the coolant bleeder screw that you showed in this video doesn’t have to be completely removed and mine “ bled” with the screw still being in a couple turns. Also, there is a drain peacock on the bottom of the radiator on the earlier Cruzes and other 1.4 turbo vehicles but for some reason GM stopped putting those on them several years later. P.s. my 20 yr old son drives our 2019 Buick Encore and I have told him to watch the temp gauge as well as to check the oil level regularly because of the PCV issues. GM really should have fixed the problems with the PCV, intake, and coolant issues by the time our 2019 Encore was built and there should be an extended warranty coverage on these parts and repair.

[@DIYwithMichaelBorders]

Good morning ☕️ we are very honored that you took the time to share this. We really enjoy reading comments like this in hopes of helping out. You are spot on, the Dorman reservoir is a bit tougher and more reliable however not all Dorman parts are. We have come across a few Dorman parts that we feel aren’t as up-to-par as the OEM. As you also mentioned, checking your engine fluid levels and checking for leaks on a routine basis is a very good practice. This allows you to catch a low fluid level or leak at its earlier stage and can allow you to fix it before it becomes a huge issue. Thanks again for taking the time to reach out to us, we are honored, thank you. 🧰

[@hi-xq8id]

Thanks for the video. It helped my brother and me a lot. We saved a trip to the mechanic plus the money we would've spent.

[@DIYwithMichaelBorders]

hi Very cool and you are welcome. Glad the video helped. That’s cool you & your brother are working on cars together. 😀 Definitely let us know if you have any questions. Us fellow DIY’ers need to stick together. Please subscribe to the channel and ring your KZbin bell 🔔 this Will be very helpful to us thanks again. 😎👍🔧🔩

[@hi-xq8id]

@@DIYwithMichaelBorders I subscribed today. I'll bring the bell too. Thanks, claudia

[@DIYwithMichaelBorders]

hi You Rock! We subscribed back. 😎👍🔧🔩

[@MsDunn-x6o]

Great detailed information, my hot engine light was on last night so i am adding antifreeze now, i have to find that valve to see if i have a leak, or i might just do it and look for leaks in the hoses without opening the valve thank you

[@DIYwithMichaelBorders]

@@MsDunn-x6o We are honored to help, no joke. Hoping you have a stress-free DIY project. 😎👍🧰

[@dustinknuckles4090]

You have a lot of great videos. We have a 2013 cruze lt and they are pretty good cars but they are a cooling system nightmare. Once something starts leaking you may as well overhaul the entire cooling system

[@DIYwithMichaelBorders]

Good morning, thanks for sharing this. We are drinking our morning coffee answering any and all questions for the DIY community. The coolant system continues to challenge Cruze owners for sure! Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@pandason_89]

So I used this video and the one about changing the overflow tank and it was really easy and you explained it so well, thank you for posting your videos man. You're awesome

[@DIYwithMichaelBorders]

Good morning Daniel ☕️ You are very welcome, thank YOU as well for 1-making it a DIY project and 2-taking the time out of your Saturday to share this. Much appreciated! Hope you’re having a great weekend, reach out to us any time. 😁👍☕️

[@carbonm2]

Thanks man. Found your video by searching the coolant tank bubbling. I changed it and no more bubbling, it's under pressure now

[@DIYwithMichaelBorders]

Royce Johnson Thanks for watching. Great to hear. Let us know if you have any questions. Many more helpful videos to come! 😀 Us fellow DIY’ers need to stick together. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jmvalenciacazarez9895]

Tengo el mismo problema burbujeo en el tanque de reserva de agua mañana lo cambiaré 👍🏼✌🏻

[@TechTronics7]

What should I do on 2015 cruze? My coolant reservoir was very low so I topped up the coolant reservoir without opening the bleeder screw. I put the cap on and after a few miles of driving my car is overheating and I have the coolant bubbling in the reservoir. The temp gauge goes about 1/4 of the way cold. Do I have air in my system? Should I squeeze the hoses? Should I try to open the bleeder or should I park on a hill and open the reservoir tank and run the car? The coolant is to the full line so I can’t add anymore. I took it to a mechanic and he said he ran 2 diags on it so head gasket and stuff should be ok. And if I drive it a few miles and it over heats and coolant bubbles.

[@DIYwithMichaelBorders]

Good morning ☕️ It’s likely that you have a fluid level issue and the coolant is not flowing through system properly…thus exceeding it’s normal operating temperature and boiling. Following the steps in this video should get your coolant system back working properly and within the correct temperature. 👍🧰

[@TechTronics7]

@@DIYwithMichaelBordersThank you, did what your video recommends. It is not bubbling that much now after my long test drive. My only concern is the fan never came on, drove the car for almost 2 hrs. The temperature gauge remained 1 tick below the half way mark the whole time, once I put the reservoir cap on & engine had reached temperature. On my Cruze I don’t have the coolant temp menu, couldn’t find it. But the temp remained constant, even tried putting the heat all the way up.

[@DIYwithMichaelBorders]

@@TechTronics7 That’s a great update, moving in the right direction. Awesome job getting the system back to proper temperatures. The fan will remain off until the engine exceeds a high temp…which sounds like it’s not because your coolant system is performing as designed. Keep a close eye on it in coming days/weeks. 😎👍🧰

[@_Yvonne_a]

Great video. I am actually currently doing this on my 2012 chevy cruze. I noticed that the coolant temp is struggling to get up to 250 . it fluctuates between 209 - 215. Radiator fan has not come on and it has been about 20mins on idle. any idea what can cause this?

[@edgaral]

thank you as a Malibu owner, i found this pretty useful

[@DIYwithMichaelBorders]

Very cool & we appreciate that. Malibu is a great vehicle. Hope all is well. 😎👍🔧🔩

[@rhysparkes860]

Hey mate great videos, Iv got my cap off while my car is running to loose the air bubbles but my coolent is bubbling ? Is this normal

[@DIYwithMichaelBorders]

rhys parkes Thanks for watching. In most cases no however this can happen when the system is low on coolant. Keep us posted on how it performs after the system is within the proper fill parameters. 😎👍🔧🔩

[@itsbrittanybiih]

I’m away from home and my cruze is overheating. I’m sure it’s a leak cuz my coolant reservoir is empty and it had coolant a month or so ago. My question is, do I have to unscrew that part in the front cuz I don’t have a screwdriver and I need to add coolant right now….

[@DIYwithMichaelBorders]

Thanks for watching, any update? If your system still has coolant inside system, it’s safe to add more coolant to reservoir without removing the plastic bleeder screw and bleeding system. Two very important things to note. 1. Do not unscrew the cap from the reservoir until you have allowed the engine to cool off in the off position for a minimum of 3 hours. This will alleviate super hot coolant from exploding out of the pressurized system and burning you. 2. Make sure the coolant you are adding is the proper premixed coolant recommended by GM, which can be found in your owners manual in your glove box. 😎👍

[@emanfigflo9799]

So if you just adding coolant, there's no need to remove bleeder screw?

[@DIYwithMichaelBorders]

Eman FigFlo Thanks for watching & we appreciate you reaching out to us. If you’re just adding Coolant to your system because it’s slightly low as opposed to filling it from 100% empty...you do not need to remove Bleeder Valve. Hope this helps. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@Shriiiiners]

@@DIYwithMichaelBorders I'm assuming coolant goes down faster in a warmer client had my car for 5 years and need to top it off do I need to still go through the engine steps if I'm just refilling

[@DIYwithMichaelBorders]

Chloe Price Thanks for watching. Great question & if not drained...meaning coolant level just needs to be brought up to the proper fill parameters. Let us know if you have any questions. Many more helpful videos to come. 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@Jaiibe1]

Hey Mike. 2013 Chevy Cruze owner here and dealing with coolant issues, as usual. One question for you - what does it mean if my temperature gauge goes down to the usual middle point when the car is running but as soon as I turn my heater on inside my car while I'm driving, the temperature gauge starts going back upwards towards cold? No messages popping up on the dash and no check engine light.

[@marcellaterry9932]

Man, you are just one of the top greatest 💯

[@DIYwithMichaelBorders]

Marcella Terry That’s very nice of you. That’s why we love KZbin. Reach out to us if we can help with questions. 😎👍🔧🔩

[@londonlikethebridge1770]

This is SO helpful! Thank you! Would this info imply to a Chevy Aveo as well?

[@neeltrivedi1160]

Hi, Is it fine if we don’t take out this thing at 1:09 and directly refill the coolant? I don’t know much about cars

[@DIYwithMichaelBorders]

Neel Trivedi Thanks for watching Neel & we appreciate you reaching out to us. Removing this plug is important as it helps properly ventilate the system which helps the efficiency of the draining process. Not removing it will lead to not all coolant draining out. Your old coolant can contaminate your newly added coolant which can lead to future issues. Glad to help! Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@neeltrivedi1160]

Thank you very much Michael! It truly helps.

[@DIYwithMichaelBorders]

Neel Trivedi Awesome Awesome! 😎👍🔧🔩

[@kristanwilliams7387]

Thank you. I have a 2014 chevy malibu eco. I followed your steps & save me some money. I have to change my bottom resivor hose now now, the 3 way 1 wish me luck 👍

[@DIYwithMichaelBorders]

Very cool, & you are welcome. Looking forward to hearing back from you on the reservoir hose replacement.

[@jasean8251]

I’m low on coolant and don’t have a screwdriver handy is the first step truly necessary? Also thanks for the video

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. What’s your update? How did your project go? We are always here to help answer questions. Enjoy your night. 😎👍🔧🔩

[@אילןגור-אלעמיר]

Leave the condensate tank open for 15 minutes until the fan works? Will the water not burst out?

[@DIYwithMichaelBorders]

@@אילןגור-אלעמיר Thanks for watching, can’t confidently say.

[@mono7891]

I followed your instruction and replaced the thermostat/housing and then the coolant. After topping off to the level, I drove (might be 10 miles), came back and looked at the coolant tank. The coolant level had receded to the hose-connection point. One good thing is that my Engine Light which was "on" prior to replacing the thermostat is off now. My question, shall I follow your procedure to top off the coolant or just remove the reservoir cap and fill it to the mark ? Thank you.

[@DIYwithMichaelBorders]

Thanks for watching & great question. If there is still coolant present in the tank however it’s just below the fill parameters, you can just remove cap & add coolant. We recommend letting engine sit off for a few hours to allow it to cool down & release pressure. 😎👍🔧🔩

[@mono7891]

@@DIYwithMichaelBorders Thank you.

[@DIYwithMichaelBorders]

@@mono7891 😎👍

[@kaydevlin1194]

I have a 2020 Chevy Sonic hatchback le that had the the entire coolant system and hoses replaced. No problems for a good while . Engine light came on this am and have hardly any antifreeze. Help. Will go back to dealer but guessing a leak ? I haven't ever heard of that plastic screw release before does my car have that?

[@DIYwithMichaelBorders]

@@kaydevlin1194 Thanks for watching, how long ago did the coolant system parts get replaced? If it was recent, it would be a good idea to return to the dealer and explain the repairs didn’t fix problem. However if you feel more comfortable inspecting for leaks on your own, you can add coolant to system as shown in this video and look for a leak while engine is running and pressurizing. ☕️🧰

[@kaydevlin1194]

@DIYwithMichaelBorders Thanks. Maybe 6 months ago the whole system was replaced. I watched your video and filled my antifreeze and will check this am if it's still ok. I will surely go to the dealer if adding coolant doesn't help and I don't see a leak. I do have an appointment at local mechanic this afternoon to check to see why the engine light is on. I was under the impression that once problem is fixed the engine light would go off by itself after a short period of time but mechanic told me it has to be reset by them? So I asked to have them hook up to diagnostics machine to see what it definitely is. I am only limited on my car knowledge. Thanks much

[@DIYwithMichaelBorders]

@ Thanks for the reply, hopefully you can pinpoint a leak or the mechanic can and get it fixed right away without taking up too much of your time.

[@kaydevlin1194]

@DIYwithMichaelBorders thanks very much

[@DIYwithMichaelBorders]

@ 👍🧰

[@emilyjea]

Thanks for your helpful videos and for responding to everyone’s comments! I just discovered that I have a coolant leak- my fluids were topped off two weeks ago and my coolant level is already low in the reservoir. Until I can get it in at the mechanic, I’m topping off. If I do it first thing in the morning, can I just unscrew the top and fill- do I need to also do the unscrewing other cap/letting it run/looking for leak part? Thanks!!

[@DIYwithMichaelBorders]

Emily Jeanne Thanks for watching & sharing your experience Emily. Great question & as long as the engine has been off for at least 3 hours, you can safely open & remove cap from reservoir to add coolant. In order to check for coolant leaks you will need to start engine and allow the engine to heat up to normal operating temperatures. At this point you will have the best advantage to any noticeable leaks. Keep us posted on your project! We are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@mikevalic7037]

@@DIYwithMichaelBorders *

[@stanglifemike]

Ohhhhhhh, I thought people did want hot coolant to burn their face and eyes until you said that it wasn't good @8:23. Thanks for clarifying!! I guess you really do learn something new every day. Oh well, at least the burn-scars covering my face look kinda cool. 🤷🏼‍♂️

[@DIYwithMichaelBorders]

Thanks for watching, hope all is well with you and your family. 😎👍

[@dailyquicky3257]

Hey there, I followed all the steps and at the moment where I waited for the coolant to go through the system with the cap open the volume increased instead of decreasing. Odd. Do you think there might have been coolant still in the line? *update! The reservoir ended up overfilling and even bubbling up sending coolant everywhere while the cap was open when I was waiting for those 10-15 minutes! Had to run and turn the car off!

[@DIYwithMichaelBorders]

DailyQuicky Thanks for watching & we hope you enjoyed the video. Boiling coolant fluid can be caused by a clog in system or failed Water Pump or Thermostat. The water pump is a GM recall part and can be replaced at your local Chevy dealership for 100% free. We definitely recommend calling your local Chevy dealership to see if your vehicle qualifies. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@tonerc.8191]

@@DIYwithMichaelBorders Is the water pump still a recall for chevy cruze? I was told there was no leak by several mechanics including Chevy. Told there was no recall, and I'm always losing coolant. Idk what to do at this point.

[@DIYwithMichaelBorders]

@@tonerc.8191 Thanks for the reply & it is still a recalled part however there is a mileage cut off. Not sure exactly the cutoff as they differ for each Cruze year & serial #’s. If you have no signs of leaks, it’s very possible that your coolant is sneaking past the internal engine seals and being burned off in the engine and exhausted out your exhaust pipe. Unfortunately this is a common cause that Cruze drivers are experiencing. Hope this helps. 😎👍🔧🔧

[@snapdragon7]

I noticed my car was heating up and a fan was going off in the engine. I checked and was low on coolant. I put some up and did what you said in the video, thank you!! However, 2 weeks later it was doing the same thing, I'm afraid it might be something bigger..

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your experience. We recommend inspecting the engine compartment to see if there are any noticeable signs of coolant leaks. It’s best to have the engine running which will allow the coolant system to pressurize. Keep us posted. 😎👍

[@WoofaCrewMusic]

Very helpful with this and the entire coolant series of videos for a Cruze. Appreciate the help man!

[@DIYwithMichaelBorders]

Alex Odom Thanks for watching. Glad it helped. Us fellow DIY’ers & Cruze owners need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@gkan93]

Thank you!! I just replaced my thermostat and replaced coolant watching these videos!! Thanks again

[@DIYwithMichaelBorders]

gk'93 Awesome Awesome & thanks for watching. We are happy the video helped. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@leemachado5286]

Thank you SO much! You just saved me a trip to the dealer/mechanic, I had no heat in the car turns out the coolant is way too low! Good to find out now before winter hits up here in north Idaho ;-)

[@DIYwithMichaelBorders]

Thanks for watching & you are very welcome. You can put that money you would have spent towards something more enjoyable. 😀 Let us know if you have any questions, us fellow DIY’ers need to stick together. 😎👍🔧🔩

[@M5Sefii]

Wish you all the best my friend Lots of respect from Pakistan 🎉❤

[@DIYwithMichaelBorders]

@@M5Sefii We appreciate that, thank you. Many more helpful videos to come! 🧰

[@veggiepowered]

I'am Your Newest Subscriber Great Videos Been Having Overheating Problems With My 2012 Eco Chevy Cruze 6 Speed Manual The Old Hoses Have Been Leaking I Have Been Replacing Them

[@DIYwithMichaelBorders]

Very cool & we appreciate that. Welcome to the DIY Raptor Club. We just subscribed to your channel as well. Hope all is well with you and your family. 😎👍🔧🔩

[@coolersthecar]

Thanks for the information, I have the same problem, but through you I found the solution

[@DIYwithMichaelBorders]

We appreciate you watching & you are very welcome. Enjoy your upcoming weekend. 😎👍🔧🔩

[@andrewm5190]

I have a Chevy Cavalier that was running around 195 since the day I got the car. A few weeks ago it started running passed the midpoint about 2 lines down. With a scan tool its saying engine temp is 221. I noticed this issue happened as soon as I began using my heater since it is getting colder here in Georgia. I have done a coolant flush, new thermostat, water pump was done during the summer, and new serpentine belt. After doing some research when I changed my water pump in the summer I never did bleed the air in the system afterwards. I also refilled lost coolant with the light green Universal kind. Is it the air that caused this issue?

[@DIYwithMichaelBorders]

A M Thanks for watching & we hope the video helped. It’s very possible however unlikely...but we cannot rule it out. Have you noticed any leaks along your coolant system? Keep us posted! We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@andrewm5190]

@@DIYwithMichaelBorders I have done a pressure test and left it there for about an hr and it seemed to maintain pressure at the 15 PSI mark. After seeing your video I dont think I am bleeding the air all the way. I also noticed that when you cut the heater on you only turn it once. I have been turning to max setting. Does that affect the bleeding process? Also is it important to put the cap on with the engine running after all air is bled? I have been waiting til it cooled down to put the cap back on.

[@DIYwithMichaelBorders]

A M Thanks for the reply & it does, you will need to use the first setting. 😎👍🔧🔩

[@ryanmiels]

I noticed the heater was not working when the cap was off, but as soon as I put that cap back on and the system pressurized it worked properly. Is that normal? The radiator fan never turned on for the engine but it was a cool day and I believe it just didn't get hot enough.

[@DIYwithMichaelBorders]

Good morning, sometimes this will happen due to lack of pressure. Once engine is running, the coolant system begins to build its required internal pressure in order to operate as designed and cool the engine…and assist in the operation of the heating/ventilation system. Lack of pressure can significantly degrade operation. Please reach out to us anytime if you have any questions. Hey if you’re into crypto trading, be an early participant in our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@shanelekanudos3921]

If the level gets low while the car is running can you add coolant to it while its running?

[@DIYwithMichaelBorders]

Shane Lekanudos Thanks for watching & sharing your question. It is possible to add Coolant to engine while engine is running...HOWEVER VERY IMPORTANT....only after letting your engine sit in the off position for more than 3 hours...& then starting it. Once your cap is secured, it will begin to pressurize. At this point, it is extremely dangerous to remove the cap due to high pressure and HOT Coolant! Keep us posted on your project, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@alexrodriguez3914]

Hello, do you think is the same process for a 2020 Malibu LT? Thanks

[@DIYwithMichaelBorders]

Good morning ☕️ Steps are similar however size and location of parts are slightly bigger.

[@alexrodriguez3914]

@@DIYwithMichaelBorders I couldn’t find the bleeder valve anywhere and the vehicle manual doesn’t mention it at all. I ended up following those steps and everything seems going well

[@DIYwithMichaelBorders]

@@alexrodriguez3914 Thanks for the follow up. 😁👍

[@scottagon]

Hi, I'm an owner of the NZ/AUS version (Holden Cruze), I can see that in your video at 6:50 your unit shows a speedometer on the centre info-panel, Is this a setting? and how did you get this to display? My car shows the gear (when tiptronic) and my fuel economy, Cheers

[@DIYwithMichaelBorders]

scott Thanks for checking out the video and sharing your comment. This feature can be accessed by selecting your menu push bottom & toggling through the display options. It’s a pretty cool design. We replaced old with new & all good from there! 😎👍 Keep us posted on your repair! Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs Oil Change: kzbin.info/www/bejne/gHPZdKuwnZJljcU P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0

[@zxgh]

Awesome video and clear instructions, hope you continue doing this .....can’t wait for more Chevy DIY videos from you

[@DIYwithMichaelBorders]

ash4youtube Thanks for watching & we are happy the video helped. We really appreciate your comment, that’s awesome! 😃 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@annajohnson6499]

Hello! Where did you order your reservoir from? Do you have a link that I can order from?

[@DIYwithMichaelBorders]

Anna Johnson Thanks for watching, great question! We purchased our new reservoir from our local AutoZone. We HIGHLY HIGHLY HIGHLY recommend purchasing the Dorman brand reservoir. The OEM part is no good...embarrassing tell you the truth. Hope this helps. Keep us posted on your DIY project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@annajohnson6499]

@@DIYwithMichaelBorders thank you

[@DIYwithMichaelBorders]

Anna Johnson 😎👍🔧🔩

[@sunniegrace9707]

Just wondering why you ended up removing all the seal on the jug of antifreeze, And a little insight: sounds like you should check the oil

[@DIYwithMichaelBorders]

@@sunniegrace9707 Thanks for watching, that will be personal preference. We appreciate your insight, always welcome here and much appreciated. 👍🧰

[@nolls888]

Hi, it's my first time about to add some coolant to my Chevy Sonic 2015, it only has 30k miles. I noticed that the coolant tank/liquid is about 3/4ths under the 'recommended' line. I just want to add a little bit. Do I just go in there and add the coolant, do I have to do anything else afterwards?? I'm just paranoid I'm going to mess up my first car. Lol..

[@DIYwithMichaelBorders]

nolls888 Thanks for watching & great question! Following these simple helpful steps are all you need for your specific 2015 Sonic. Let us know if you have any additional questions! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@sahilsangwan6371]

I drive for ride-share. My Holden Captiva, I don’t find any coolant leak throughout the day, I check it thoroughly. But when I park it, at night it leaks and in morning I find there is lots of coolant on the ground. Why doesn’t it leak when it is hot? Thanks in advance.

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Great question and hopefully we can help. The coolant system is a pressurized system. Once engine starts, the system begins to pressurize. As the engine heats up, all parts throughout the system begin to operate and guide coolant through engine. If engine is running for a short period of time, it’s common for certain parts within the system to not operate…ex: Thermostat not opening and allowing coolant through remaining portion of engine. Once engine turns off, it has an aggressive amount of pressure inside system and in your case…it’s beginning to leak out of the reservoir vent…or it’s likely that’s happening. Do you notice any coolant leaking out of your reservoir vent while engine is running or after engine is turned off after driving for awhile…? Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@sahilsangwan6371]

@@DIYwithMichaelBorders it is leaking somewhere near where the hose pipe from the engine meets the radiator, so I put metal clamp to stop the leak but now the plastic part of radiator appears to be leaking! But that doesn't happen when daytime I keep checking the same area where it leaks at night, I drive 150- 200 km on average regularly.. It only happens at night when it is cold.... Car has done 300,000 +kms...

[@DIYwithMichaelBorders]

@@sahilsangwan6371 Thanks for the update, you may need to install a new hose. Unfortunately over time, the hose can harden and warp…witch makes it very difficult for the clamp to secure itself in a way to create a water-tight seal. 👍

[@sahilsangwan6371]

@@DIYwithMichaelBordersalright thanks buddy for the info.👍

[@DIYwithMichaelBorders]

@@sahilsangwan6371 😎👍

[@timweir2424]

Great videos , got a Astra GTC 1.4T , had to renew the degassing hose o-ring as was leaking slightly, found it difficult to bleed system, opened yellow valve ,coolant flows ok, middle gauge temperature but fan only comes on with a/c no overheating but rad feels cool.

[@DIYwithMichaelBorders]

Tim Weir Very cool & we are happy to help. Thanks for watching Tim. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jcorral126]

Great video helped me out big time, changed the thermostat, and also found a Crack in my reservoir keep up the great work

[@jcorral126]

Didn't get the oem thermostat but it still ran me 89.00 for it and another 39 for the reservoir 🥴 🤣

[@DIYwithMichaelBorders]

@@jcorral126 Thanks for watching & we appreciate you sharing this. Welcome to the DIY Raptor Club juan. Many more helpful videos to come!

[@jimkryslqa3981]

Your videos are just excellent, thanks a ton for doing this. Sorry but very long and detailed question for you. My 2014 Cruze ECO was losing coolant and I found the tank was leaking (coolant dripping from underneath it) and I replaced it with the Dorman and now that is dry. However, I was surprised to find the coolant level is still going down a bit. The engine runs very smoothly all the time and there are no other signs of a coolant leak anywhere and I have been monitoring the coolant temperature on the OBDII port which does not exceed 221 degrees even after driving up big hills in my area. I was/am hoping I had some air in the system but very worried it is head gasket and followed your procedure in this video (running without the cap on to evacuate the air) and the coolant boiled once it got to (coincidentally) 221 degrees. I did similar test with the cap on and the fan came on about at 221 degrees (and the temp would peak at 221 degrees). However this time the fan did not come on but I also had to shut the car off. I don't think my thermostat is stuck as I would expect to overheat while driving in these hills. Also, as I ran the car with the cap off, the coolant level rose (from ~quarter of an inch below max line to ~quarter inch above) as the car warmed up. Given that I am hoping the air that was in the system is now out of the system but I also still can hear some gurgling over the engine when I shut off the car when hot, so I am scared to run the car too much more if I do have a head gasket leak. Also, no white smoke in tail pipe and coolant looks perfectly orange. Should I get a pressure tester or am I stuck going back to dealer?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your experience. A few things come to mind. As the engine warms up, the coolant begins to heat up which leads to liquid expansion. When this takes place, coolant begins to flow to the reservoir tank. As engine cools down, the coolant condenses & begins to flow back to radiator. During this process, the coolant itself may gurgle & bubble...which surprisingly is normal. Since your engine is not overheating, we think you’re spot on when you mention your thermostat is operating as designed. Back to the coolant, just like any other liquid... it can’t evaporate over time however at a very slow rate... since coolant is specifically designed to not evaporate...🤔 With that said, if you are losing a large amount of coolant in a short period of time... coolant may be sneaking past the internal engine seals and being burned off and exhausted out your exhaust pipe. Unfortunately this is a very common issue with the Chevy Cruze. Depending on the condition of the internal seals will depend on the repairs being friendly or...well...not so friendly. Please keep us posted on your project. 😎👍🔧🔩

[@jimkryslqa3981]

@@DIYwithMichaelBorders Thanks again for your expert help. So here is my update, I have driven the car about 100 miles and the coolant level appears to be stable now. Previous to doing your procedure for filling the coolant (after replacing my leaking reservoir tank) I definitely added a quart of coolant so keeping my fingers crossed that I just had a ton of air in the system that needed to be evacuated.

[@DIYwithMichaelBorders]

@@jimkryslqa3981 That’s a great update & we appreciate you sharing this Jim. Hopefully many stress free days ahead for you. Enjoy your week. 😎👍🔧🔩

[@basketball_training2022]

If I filled an empty reservoir without taking the screw out, is that bad and if so what should I do to fix it?

[@DIYwithMichaelBorders]

@@basketball_training2022 Thanks for watching. In that case, it just didn’t allow you to fill it in an efficient manner and allow coolant to push the air out. After engine start, you will want to allow the air to make its way to the reservoir and get removed from system. Once no more bubbles, you can secure reservoir cap and allow system to pressurize and check for leaks. 👍🧰

[@basketball_training2022]

Okay! Thank you so much!

[@DIYwithMichaelBorders]

@@basketball_training2022 👍🧰

[@aladinestoesta4454]

So i took my car to the dealership and they rplace the thermostat and the water pump. However, when i took my car back, drove it for atleast 20 miles. When i turn of my engine, oppened the hood the coolant was boiling. Is that normal?

[@DIYwithMichaelBorders]

Aladin estoesta Thanks for watching & sharing your experience! It is normal for the coolant to heat up to extreme temperatures. Are you experiencing a leak of some sort? We strongly recommend not opening the coolant cap on the radiator while the engine is warm, the coolant can burn you...no fun! Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@garynewman9562]

Michael, thank you for the great videos. I do have one question for you. I what is the "normal" coolant operating temperature of the 1.4 liter Cruze engine? I have just replaced the thermostat housing on my Cruze for the second time. Both times I followed the instructions for refilling the system. I'll admit I didn't really pay a lot of attention to the temperatures the first time but I have the second time. My engine seems to be running between 223º and 230º. This seems a bit high to me.

[@DIYwithMichaelBorders]

Thanks for watching, normal operating temperatures for a 1.4l Cruze engine is 190*-225*. You are well within normal operating temperatures with 223*-230* as long as your Thermostat is working properly and allowing coolant to flow throughout engine for cooling. Your radiator fans will also turn on once thermostat opens and allows coolant flow throughout engine. Once thermostat opens up, it will allow coolant to flow and lower engine temperatures back to within 190*-225*. As you’re driving car, the engine temp needle must remain ever-so-slightly below the 1/2 point. That will be normal operating and safe driving temperatures. 😎👍

[@kimberlyramon4442]

wish me luck a girl with no idea what. Tf to do 😭😭😭😂

[@manuelsheehan912]

Follow his directions

[@Kuddi27]

LMFAOOO girl same. I feel like i wanna cry right now. How did it go lol

[@tammiebrand7872]

Me also lol

[@True_Joker]

Ok, fair idea on reference of releasing the pressure from the cooling system, but I have opened so many different cooling systems that were under pressure, and not once have I "burned my face, and burned my eyes." Nice try though, as I know a lot of it is common sense, which most people seriously lack today. But thank you at the same time, as a few of your videos have been helpful

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing your thoughts. Hope all is well with you. Enjoy your week. 😎👍🔧🔩

[@richdars2515]

It’s hilarious when we have a million funnels at home or in car but can never find them anywhere when needed. Phillips screwdrivers are a close second lol

[@DIYwithMichaelBorders]

Thanks for watching, that’s funny. 😁

[@aliciagladden4012]

Hi, Great video! I do have a question. Do I follow this process when adding coolant or only if I drain it out completely? I hope that's not a dumb question, just don't want to do it wrong. Thanks!

[@DIYwithMichaelBorders]

@@aliciagladden4012 Thanks for watching, great question. You will follow this procedure when fully draining system and filling from completely empty up to proper quantity within fill parameters of reservoir. When just adding coolant, as you are in your case, we recommend having the engine off for a minimum of three hours, followed by opening reservoir cap and adding fluid until it reaches within fill parameters.

[@insp0776]

Excellent video. I wish I could do mine myself. Thank you

[@DIYwithMichaelBorders]

K Lewis Thanks for watching & we appreciate you reaching out to us. Hopefully this video helps you. You can make it a DIY project. Let us know if you have any questions. 😎👍🔧🔩

[@jillhickman4762]

Do I need to change the serpentine belt and the thermostat when I changed my water pump in my Chevy Cruze

[@DIYwithMichaelBorders]

Thanks for watching Jill, it’s not really necessary unless the belt itself is showing clear signs of wear. If you see any minor rips, dry rotting, frays...we recommend replacing it. Hope this helps. 😎👍🔧🔩

[@Dmcdon13]

How do you display the coolant temperature for the chevy 2014 on the dashboard

[@DIYwithMichaelBorders]

Donovan McDonald Thanks for watching & sharing your question. If your dash is programmed the same as ours, you will need to select your menu button & use toggle option to scroll through your dashboard display options. Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@guneygoktug7387]

Dear friend, I want to be sure that you did not close reservoir cap until fan switch on ,if yes how it is happening.when I tried it coolant fluid was boilling . I have a problem about coolant system ,there is air inside the system and i can not bleed air from coolant system . My car has Lpg system and as you know that to connect the lpg system you should use coolant system . I think that the problem is occured due to more pipe connected . Evet there is air in system i do not have overheating problem . Cou you give me advice please?

[@DIYwithMichaelBorders]

Turgay Gungor Thanks for watching & we hope you enjoyed the video. We re-secured the reservoir cap after 15 minutes of engine running at idle. Many more helpful videos to come. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@nekro9908]

Can I use 50/50 coolant on 2012 Chevy Malibu LT

[@DIYwithMichaelBorders]

nekro9908 Thanks for watching! Great question & The first thing we recommend is referencing your owners manual to see what exact coolant the engineers that designed this engine want you to use. Your owners manual should have the exact name of the coolant and your local AutoZone should have some. Great question and thanks again for asking! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@Hinokami_TT]

Hello! Not sure if you will respond but my 2012 cruze doesn't have reading for the dash settings. How would I know it reaches a certain temp without a temp gun in general? Where you showed how hot it was getting in °F

[@DIYwithMichaelBorders]

Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. That’s a great question, since your model does not have this programmed into the system, you will need to turn engine on & wait until your radiator fan turns on. Once your radiator fan turns on after roughly 10-15 minutes of engine running, that is your clear indication that your thermostat has opened and is allowing coolant to flow through the engine as designed. On the other hand, your radiator fan may not turn on while the engine is just running at idle and that’s perfectly OK. In that case, it will tell you that the coolant system is operating as designed and not allowing the engine to heat up to the point where it needs extra assistance and airflow from the fan. Hope this helps. 😎👍

[@Hinokami_TT]

@@DIYwithMichaelBorders Thank you so much! Your a big help

[@DIYwithMichaelBorders]

@@Hinokami_TT 😎👍

[@mrzif0013]

Does coolant evaperate?

[@DIYwithMichaelBorders]

mr zif001 Thanks for watching & we hope the video helped. It sure can however there are internal additives that prevent it from evaporating. The internal additives can break down over time... leading to the coolant evaporating. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@zirymalpica8689]

This video will help me when I put coolant on my car since I have no father figure. Thank !

[@DIYwithMichaelBorders]

You are very welcome & welcome to the DIY Raptor Club. Keep us posted on your project. Thanks for watching. Enjoy your day. 😎👍🔧🔩

[@Jaxdp65]

I’ve done everything like you said ran the car for 30 minutes it got up to normal operating range but fan never came on check fuse box everything looked ok fan will come on with ac but not with just engine running I’m at a loss

[@DIYwithMichaelBorders]

David Pierce Thanks for watching & sharing your experience. What’s your update? Have you taken the car for a long drive & warmed the engine up to normal operating temperature. If you have taking the car for a long drive and the temperature needle inside your instrument cluster remains below half, that is also a clear indication that your new thermostat is operating correctly and efficiently. 😀 Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@dandmpug]

Thanks so much for all the great info! I had no idea about any of this!

[@DIYwithMichaelBorders]

You are very welcome. Let us know if we can help answer any questions. 😁👍🧰

[@matthewst88]

Thank you. This really healped

[@DIYwithMichaelBorders]

Tiffany Matthews Tiffany, thanks for checking out the video and sharing your comment. We replaced old with new & all good from there! 😎👍 Keep us posted on your repair! Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs Oil Change: kzbin.info/www/bejne/gHPZdKuwnZJljcU P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0

[@phillyphoenix4259]

I replaced the water outlet, step by step, but I'm still overheating. Any suggestions? HELP!!

[@DIYwithMichaelBorders]

Philly Phoenix Thanks for watching. The next common part is your Thermostat. Replacing your Thermostat should fix your issue. Keep us posted. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@avcintdanielbotte]

First of all. I wish I had seen these videos before I had to refill my coolant. However recently a hose in our 2012 Chevy Cruze broke and coolant was leaking out. Leading it to over heat. After fixing it. Noticed that our coolant temperature being about 195 degrees to 220. My question is, is that an okay temperature of it is close to 220? Because my gf and I are moving from California to Georgia in 2 weeks and want to make sure we can make it without overheating.

[@DIYwithMichaelBorders]

daniel botte Thanks for watching & great question. That is normal operating temperatures. Once your engine heats up to approximately 215-225*....your Thermostat opens up which allows coolant to continue to flow through the remaining system...which keeps your engine temperature within its normal operating range. Most important thing to monitor is the actual needle. Your engine temperature needle should always always always stay below the 1/2 way point... if it goes above 1/2, something is wrong. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jarmsfirstclaw]

Question: why do you need to unscrew the plastic screw at the beginning?

[@DIYwithMichaelBorders]

Thanks for watching and welcome to the DIY Raptor Club. This plastic screw is your bleeder port/valve screw. Having it removed will allow you to properly fill coolant system and allow the coolant to flow through the system efficiently. 😎👍🔧🔩

[@DIYwithMichaelBorders]

@Arthur Morgan Thanks for watching. 😎👍

[@glennsr2577]

Great video, well done ......i just have one question. If the coolant is low, couldn't i just fill it to the proper level when the car engine is cool?

[@DIYwithMichaelBorders]

Glenn 1 Thanks for checking out the video and sharing your comment Glen 1. That is definitely a great idea. Wait until the engine is cold, & then fill to within the proper parameters. We replaced old with new & all good from there! 😎👍 Keep us posted on your repair! Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs Oil Change: kzbin.info/www/bejne/gHPZdKuwnZJljcU P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0

[@dbj7093]

Odd question; does the orange coolant look pinkish once poured into the surge tank?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It can definitely show signs of a lighter orange tint after being added & viewing it through the plastic reservoir. We hope you enjoyed the video. Enjoy your day. 😎👍🔧🔩

[@chino3643]

Thanks I did it. Everything went well .💪

[@DIYwithMichaelBorders]

Chino El Duro Awesome Awesome & thanks for sharing your update. Well done & you saved some money 💰😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@lovessellie17]

I just did this but it looks like my coolant leven started to rise a bit? Did I do something wrong?

[@DIYwithMichaelBorders]

Thanks for watching, any update? The coolant level will rise and lower slightly periodically as the engine is running. That’s a good thing, as it verifies that the coolant is flowing through engine properly and cooling engine. 😁👍🧰

[@evansdarien5125]

What if I just put the 50/50 Preston’s coolant without bleeding it

[@mcauleyman]

Without bleeding it you could have overheating problems

[@brittanybenson4865]

You saved me a ton of money. Thank you for this.

[@DIYwithMichaelBorders]

You are very welcome Brittany, saving money is great. Hope all is well. 😎👍🔧🔩

[@roelgonzalez1244]

Great video but was wondering if it get to temp the resivour starts to over flow what could it be? And sorry in advance if I spelt it wrong

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. This is a common issue with the Cruze. In most cases, this is caused by a faulty Thermostat. Below is a link to our video showing how to check to see if Thermostat is working or not. kzbin.info/www/bejne/iWG4mqZ_mM56q5Y Keep us posted. 😎👍

[@sshumkaer]

@@DIYwithMichaelBorders I drive a 2005 Chevy Impala

[@DIYwithMichaelBorders]

@@sshumkaer 😎👍

[@michellehewitt1923]

@@DIYwithMichaelBorders a

[@kyaljarrett4929]

Possibly blockage

[@lmezy25]

After filling up the reservoir tank i accidentally left the cap loss now all my fluid leaked out I added more and bled it do you think I caused damage? it never went over the halfway mark

[@DIYwithMichaelBorders]

Thanks for watching, as long as engine didn’t overheat, you should be ok. We recommend cleaning as much spilled coolant as possible when engine is cold.

[@AllyMariecc]

I hear your engine clicking I had that happen to me it was the purge valve on my car

[@DIYwithMichaelBorders]

Allyson August Thanks for watching & you’re spot on. We will be making a KZbin video soon on that. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jordansims5947]

DIY With Michael Borders did you do that video yet?

[@bencherifsoufiane17]

My chevy cruze 2013 had green cooling water and i mixed orange cooling water 50/50 is that normal? Also i did exactly what you did but when i turn off the engine i hear bubbles

[@DIYwithMichaelBorders]

Thanks for watching. It’s not really recommended to mix two different colors of coolant… And being a Chevy Cruze… the coolant system is very stubborn with the specific coolant it wants inside it’s engine. We recommend draining your entire coolant system, followed by filling it with GM Dexcool coolant. Your local AutoZone will have this exact GM coolant.

[@bencherifsoufiane17]

@DIYwithMichaelBorders yes i did bought it from autozone and it's for GM i asked for chevy cruze specifically, how can i drain it if i will have to replace now one ?

[@DIYwithMichaelBorders]

@@bencherifsoufiane17 Thanks for the follow up. Since you have a 2013, you will have a drain port at the bottom left of radiator (if standing in from of car looking at engine). While underneath engine, you will need to remove a few plastic lock-clips as you carefully shift your plastic splash guard down…so you can gain access to unscrew and remove the port. Below is a link to our video on draining a 2012. Keep us posted. kzbin.info/www/bejne/l53Hc4CsaMl7h9Usi=srsGsrI5m52R1csW 😎👍

[@bencherifsoufiane17]

@@DIYwithMichaelBorders thank you so much for your help

[@DIYwithMichaelBorders]

@@bencherifsoufiane17 We are always here to help. 👍🧰

[@umarsyed3191]

Hi Michael. It’s a great video to learn. Thanks a lot for sharing your knowledge. Please help me out with my problem. I drive cruze 2012. I am getting a hissing sound at the coolant reservoir tank even after driving around 15-30 min and sometimes the coolant comes out of the overflow hole(beside the cap) Any suggestions?what could be problem and please let me know any solution for this problem. Note: So far my engine temperature is fine (just less than half) and not overheating.