How to SAFELY INSTALL Multiple RGB FANS without ANY CONTROLLER or REMOTE

[@SidTheGeek]

Hope you guys liked the Updated Setup! and Thanks for all the love and support from Family, Friends and you all great people! _Don't 4get to _*_SMASH_*_ that like button & _*_SUBSCRIBE_*

[@jamesdeestoquia1682]

Wow..thank you...finally...finally someone with detailed explanation without speeding up or skipping the steps..im very new in this..🎉🎉 cheers man..eventhough its 2y old vids..still thank you

[@GlenBixley]

Nice upload, problem is mine dont have molex connectors. And the biggest issue I had when I installed my RGB fans was all that dust, Ive never had positive pressure and needed dust filters before. lol

[@SidTheGeek]

Well It just takes some of your time to take care of your PC but it also saves you from hassle of replacing and buying new components. Cheers!

[@prancisryucorpuz6250]

Im a completely beginner, and hard to find exact reference to connect may case fans. Glad to see this video.

[@SidTheGeek]

Thanks for stopping by! *_Please subscribe if you like_*

[@PracticalPat]

Hope your new year is going well sid! Thanks for this awesome tutorial on hooking up rgb fans for the pc. I always thought those were led lights hooked up inside the case. That was until I looked up pc parts and found out it's the pc fan.

[@SidTheGeek]

I would've imagine the same if I weren''t a PC guy. Thanks for stopping by Hope the same for you too !

[@xTriangle]

Hello Sid the geek. Like #1 here. Keep up the great work and have a great weekend.

[@SidTheGeek]

Thanks, you too!

[@qatzyt]

is it loud?

[@SidTheGeek]

No they are really Silent ! Big thanks for watching! please *SUBSCRIBE* with _Notification bell icon pressed_

[@DarrenBurch]

Looks very tidy Sid, without seeing any of those messy cables.

[@SidTheGeek]

Thanks for stopping by!

[@kashfox1050]

Great video. I want to know why my molex case fans connection looks like the way it is. Your video helped me to understand

[@MultiSciGeek]

If the fans don't sync up and the speed is constantly 1000 RPM, then what's the point of this? Can you make a tutorial where each fan speed and RGB lighting is individually controlled without a controller?

[@lara8550able]

Awesome, dear Friend. Have a wonderful time!

[@SidTheGeek]

Thank you! You too!

[@MultiSciGeek]

That's just the power. What about the RGB "channels" and where on the motherboard?

[@kisechiii3790]

hi. hope you notice this, but is there a way you can control those fans? what would it take to make it happen? or just change to new one that have controller?

[@user-cc8fx8ms9s]

Unfortnately no, molex 4pins daisy chain connectors dont offer rgb control unless its offers some rgb change controller

[@Gameskashaukeen]

I have same type of fans with same effects and connector does it support controller?

[@SidTheGeek]

No! Thanks for watching Don't Forget to SUBSCRIBE

[@Adeen216]

Wow🤩it looks fabulous👌 i👍this setup.

[@SidTheGeek]

Glad you like it

[@Penjahatz.]

I wasted some money on a fan splitter. I thought the fans came with a pin, but it was Molex only. Luckily, I found this video helpful, and can I use four fans in one molex connector?

[@SidTheGeek]

Yes you can. Thanks for stopping by.Please Subscribe

[@Traveler_Greg]

Very interesting video. Good tips. Greetings and thanks for sharing. Have a nice day. 👍

[@SidTheGeek]

_Have a nice day! and Thanks for stopping by! _

[@TheCrazyItalian88]

RGB stuff in your PC looks so awesome. Thanks for the info. Big Crazy Like for you. Have a good weekend : 777

[@SidTheGeek]

Thanks, you too!

[@mage6003]

Excellent content. Concise and neat. One of best video under this subject. 👌

[@SidTheGeek]

Thank you for the compliments! please *_Subscribe_* and share this video so we can do more!

[@RavenHart-sx8xs]

​@@SidTheGeekhey man could you help me out? i just build my pc and the case come with these molex connectors the fans and light turns fine but the front i/o doesn't whenever i connect usb port with my phone it cause havoc in pc and sometimes crashes and shut off. There is a red which constantly blinking too I don't have hard drive don't know why it keeps blinking.

[@Mxsery9]

Bro u just saved my pc now i gonna run smoother

[@SidTheGeek]

Glad that was helpful! please Subscribe for more new content.

[@gamesknrtdrinkz]

Looks great bro and expensive wish i had a PC set up like yours Like 17👍🏾

[@SidTheGeek]

Appreciate it

[@kingstargaming3357]

i have the same fans. for some reason, only the fans move but rgb doesn't work. any tips on how to fix

[@angelservian8414]

@@kingstargaming3357 did u resolve the problem?

[@kingstargaming3357]

@@angelservian8414 no. But i researched a lot and find out it may need some rgb controllers. The problem is that its hella expensive and my fans worked fine without it at the start. The rgbs either need to be replaced. Or u need to open the side panel and check the connections of rgb fans and attaxh a controller through a professional

[@JustMyFish]

Swop the first and last pins over so they run of 7w instead of 12w less fan speed but also less noise 👍🏻

[@SidTheGeek]

Thanks for stopping by! Please *Subscribe* for more

[@edgarava1]

yeah I call BS on his "they don't make noise", fans will undoubtedly make a lot of noise running at full speed

[@mashnouk]

Thank you so much my fans work now

[@SidTheGeek]

Glad I could help! Subscribe for More..

[@xBllazeSvG]

Does the rgb on the fans come stock with those animations.. I have mine plugged in the same way and they just kind of light up, no special animations whatsoever which is not how my last pair of fans were. I was wondering if maybe you knew of anyway to fix this or is just that I need another cable/controller to control the rgb. TIA

[@SidTheGeek]

Yes it comes in stock like that! The LED once stop working they are very complicated to fix hope that was very informative *SUBSCRIBE* if you like

[@MahdinurRahmanFarabi]

Some day ago I bought a new fan and I successfully installed the fan. But the problem is that my previous 3 fans changed the colour changing format. I aslo changed the line of new fan in power supply wire. But after some time old fans was running but no light and new fan was running. There is also a white plug. There are 4wires in fan. Plugs are same like yours. Help me what to do and how to solve. Thank you

[@Ash456.]

My psu didn’t have a molex I got one but now when I put it into the psu my pc won’t turn on

[@SidTheGeek]

Are you connecting it with your SATA? have you tried connecting on other SATA port? how much watt your PSU is?

[@Ash456.]

@@SidTheGeek 850w

[@Ash456.]

@@SidTheGeek I connected it with my molex fans then put it in the side that said molex on my psu

[@lujangaming2354]

big like from me

[@SidTheGeek]

Big thanks

[@lightyagami5060]

Thanks for the help brother, you helped a lot.

[@SidTheGeek]

Glad I could help. _Don't forget to _*_SUBSCRIBE_*_ with _*_Notification Bell 🔔 icon pressed_*_ . Stay in touch...as It helps us make more useful content._

[@MaMiRe]

thanks for sharing

[@SidTheGeek]

Thanks for watching!

[@kenji3133]

can i use 4 fans in one molex connector? one with the rear and 3 in front

[@SidTheGeek]

using daisy chain method you can! thanks for stopping by. don't forget to Subscribe

[@srikantas2460]

I have a similar setup , how do I turn off the fan lights incase we don't want it ?

[@SidTheGeek]

There is no way to turn off the lights or control the speed as it's directly connected to the power supply. Hope this was helpful Don't forget to *SUBSCRIBE*

[@srikantas2460]

@@SidTheGeek I don't know if this works for all but I just unplugged the first fan in the front and the lights turned off for the other three but the fans are running.

[@DepressedHamster909]

​what did u unplug exactly cause I have the same issue

[@srikantas2460]

@@DepressedHamster909 I found a better alternative, one of the fan had some open connector where i could plug a power pin, so I used my RESET pin which initially connected to the motherboard and connected to the fan so I'm currently using my reset switch to switch the RGB on or off. If your fans doesn't have any connector where you can plug that thing then one of my fans were controlling the whole RGB for all the fans so i disconnected that fan from the power source and other fans were running fine without the led's.

[@DepressedHamster909]

@@srikantas2460 thank you so much bro im gonna try it rn

[@awakeay900]

Since there is a header on the motherboard could you connect some fans to the psu and connect say another or 2 daisy chained to the motherboard header because my case has 6 preinstalled fans and im not sure how to connect all of them without the use of a splitter or hub

[@awakeay900]

Or will i have to get a hub or splitter thanks in advance

[@SidTheGeek]

Just connect using this method if you don't really need to control lights (need Molex connector ) ! else you need to use hub. Hope this helps. For more informative videos like this SUBSCRIBE!

[@randomgenerationgaming857]

This channel is amazing. Thanks for visiting me. I made sure to subscribe to this channel. Very informative.

[@SidTheGeek]

Thanks and welcome

[@israelmorales8048]

Can I control the speed of the fans? Nice video!

[@SidTheGeek]

No you can't unless fan shipped with with external controller attached to molex pins. _Thanks for stopping by !_ Hope you *Subscribe*

[@jyotishj7582]

Have a NZXT 710 i , doesn't have a front glass , any solution to change to glass in front of NZXT 710i

[@SidTheGeek]

The " i " series doesn't have any way or workaround to install glass panel. unless you are looking to DIY Thanks for watching. Make sure to Smash that *SUBSCRIBE* Button

[@mdasik7742]

Thank you ❤❤🥰🥰

[@SidTheGeek]

You're welcome ! Like and Share the video SUBSCRIBE

[@motivated_bildr]

4:28-4:35 more leg room. unless perhaps you are short. but i am tall. and so that setup looks like it would be painful for me to sit in. i would wanna put the chassis next to the desk, and out of the way of my legs, instead of under the desk, occupying my precious leg room. also i prefer to have my back to a wall, instead of to look at a wall. in a setup like yours, your friend or friends could very easily sneak up behind you and spook you. and that is something that i would like to avoid. other than those things, i like the aesthetics of your setup. very nice. : )

[@calwinka]

What are the fans called?

[@arbazhussain662]

Thanks Bro❤

[@SidTheGeek]

Big thanks for watching! please *SUBSCRIBE* with _Notification bell icon pressed_

[@arbazhussain662]

its done bro i subscribe ❤

[@abdbhfs]

I have 4 molex fans, they work perfectly, but the RGB suddenly stopped working, only one fan kept the Red light on at all times. There's also an extra thin single cable coming from each fan, any idea what that is ? (The case is Marvo CA-115 and the fans were included from the same manufacturer, i got it prebuilt so i don't have any manual for it)

[@SidTheGeek]

chances are that the fan's LED has stopped working or molex is damaged!

[@Rafaelgamestyuhfrgdveweopnb]

Amazing vídeo mais um amigo no seu canal

[@tyrannical3579]

Hi! What about those single fans that has 4-pin connector for motherboard and a molex pin (4-pin + molex fan)? Is it okay to plug both the wires or should I just pick one power source between the board pin and the psu pin??

[@SidTheGeek]

for your FAN type it would only power up your fan with Molex only and no customization (if fan supports) for 4 pin you get to adjust things through manufacturer software

[@tyrannical3579]

@@SidTheGeek cool, so I could plug both then? Wouldn't it short circuit or over voltage?

[@Hxniell77]

Can I connect 8 fans together through a single molex cable without any problem?

[@SidTheGeek]

Depends on how much your PSU can hold up! Thanks for watching Please SUBSCRIBE for more

[@insomniacaughtme4057]

Instant sub and like

[@SidTheGeek]

Thankyou! Stay Connected :)

[@followinglove666]

Sir can I use 3 fans with 1 sys_fan connector using splitter, is it possible? Please help me...🥺

[@SidTheGeek]

Need to know specification of the fan. There are internal hubs available online but never tested _Thanks for watching_ Be sure to checkout our other Videos & *_Subscribe_* if you like

[@Desireace]

I use 6 fans with 1 sys fan

[@Miss-Divya]

@@Desireace are the speed sloe

[@MixiTHG]

Never use fan splitter for more than 3 fans Use fan Hub instead way safer and better

[@user-cc8fx8ms9s]

I have semi modular 24 pin/8 pin/ pcie connected but now i have hdd/sata/ floppy ports available on the psu do i use one these available spaces for the molex connectors to connect to?

[@SidTheGeek]

I cannot recommend converters which may end up messing with your PSU! your PC technician may recommend the type of cable suitable for your PSU Big thanks for watching! please *SUBSCRIBE* with _Notification bell icon pressed_

[@AssassinNinja]

Outstanding upload enjoyed thumbs up 👍 see you around my friend 😃

[@SidTheGeek]

Thanks for the visit

[@motivated_bildr]

4:48 9 out of 10.

[@SidTheGeek]

Thanks for stopping by! Please _Subscribe_ for more informative content like this

[@razinmuntasir777]

Hi. I have similar kind of fans but mine comes with 4 pins.. Are they controllable?

[@SidTheGeek]

Hey there! you need to check details on your fan's manufacturer website Thanks for stopping by! Please Subscribe

[@Adeen216]

I will give it 10 out of 10😘

[@iqterabanwar7984]

can u help me pls. i did the exact same. fans running but rgb not lighting up. there's no rgb hub its only 3 of them moles connection cable.

[@SidTheGeek]

As I can Understand! you maybe required to connect in daisy chain method. what do you mean my 3 ? is it pin or separate output formats?

[@gabrielbecker437]

How to connect 3 rgb fan (molex) and 1 argb fan (pwm i think)?

[@SidTheGeek]

Hi Gabriel , Just wanted to clarify about those 120mm RGB case fans with Molex connectors. They typically have a 4-pin male connector on one end and a matching 4-pin female connector on the other. This lets you easily daisy chain multiple fans together using those same connectors! Hope this helps. _Do _*_Subscribe_*_ for more!_

[@sharmilav1973]

How to change the colour of fans

[@wavyclapz7773]

When I plug in my pc fans to my power supply my entire pc doesn’t turn on and when I disconnect it from the power supple the pc turns on but the fans don’t do you know how to fix it??

[@SidTheGeek]

are the fans only making this problem. when you connect other device

[@wavyclapz7773]

@@SidTheGeek yes when I connect it t the power supply I have a Corsair 550 bronze 80 power supply and the fans wont work but when I disconnect fans from power supply the pc turns on

[@JoseCastanon95]

Did you ever solve the problem. I believe I am having the same issue while daisy chaining 6 rgb molex fans? I run an 850w bq so I don’t think it would be the issue.

[@talhakhan5912]

bro can you tell me, to which port should the psu connector of molex male go into PCIe slot or CPU slot?!

[@SidTheGeek]

Into female molex connector coming out of your PSU. Please Subscribe if it helps

[@ThePsycho022]

How do you control the leds of fans?

[@ashadowintime7305]

you can't. it's only connected to the psu. it runs at 100% speed

[@SidTheGeek]

Big thanks for watching! please *SUBSCRIBE* with _Notification bell icon pressed_

[@areaofeffect100]

how do you connect each of the fan's molex from each other?

[@SidTheGeek]

You can see in the Video they are connected in Daisy Chain method _Thanks for watching_ Be sure to *_SUBSCRIBE_*

[@diokonoda]

my pc hasn't finish yet my cpu don't install it yet but why cant the fans turn on if it just need to be connected to psu only

[@SidTheGeek]

Your PC casing turns on when you press the switch, which is connected to your MOBO and then to PSU. Thankyou for watching make sure to Subscribe

[@vajeebasheep4002]

what's the brand and model of your rgb fan?

[@SidTheGeek]

120cm RGB case fan with Molex connector. Thanks for stopping by Please Subscribe

[@sezarsisi4254]

A bit if help please I have h510m a prp as a motherboard First i dont know if ive been rigger or not because the motherboard rgb pins were not there just plain holes instead therefore i cant sync my fans with my ram Solutions please

[@SidTheGeek]

Your PSU Molex cables probably hidden behind Motherboard; the back case panel because of cable management.

[@mustakim8934]

how do you set up the rgb light?

[@SidTheGeek]

In this particular model there's no way to do that. Colour themes just changes by itself automatically! thankyou for stopping by, Take some time to Subscribe for more informative videos on our channel.

[@thetdx1519]

How can i remove the fan cables pleazzz

[@SidTheGeek]

Turn off your PC. Unplug cables! remove Pc Case and Unplug the Fan's Molex connector that is connected to Male Molex coming right from your PSU. If this Helps Be sure to *_SUBSCRIBE_* & *_Stay Connected_*

[@gamesfanatic9197]

What brand of this fan

[@SidTheGeek]

Non Branded! Shenzhen but the Quality looks Good though *_Subscribe for more..._*

[@nicolaskunst4759]

como controlas las luces? como cambias de colores las luces de los ventiladoreS?

[@SidTheGeek]

can you kindly ask in english? so i can help you

[@TEKJAGAMEPLAYS]

gran aporte 👍

[@azazel3198]

How can I controle colors without controller?

[@SidTheGeek]

You can't! the purpose of Molex connection is to provide power to your components only. Subscribe and stay tuned

[@J1soo4life]

What fans are those?

[@SidTheGeek]

120mm Silent 1000 RPM Auto theme RGB FANs please support us by Subscribing to our channel there are tons of amazing informative and entertaining videos for you

[@BobMacAllister]

needs to clean his pc lol

[@SidTheGeek]

I did! check out the recent Vid

[@internziko]

Can someone link to the fans he used?

[@SidTheGeek]

search for _11 blade 120cm RGB fans with molex connector_ you can then look for similar listings. Subscribe if you like to

[@Alvinrasher]

Can I sync them

[@SidTheGeek]

Not possible due to seperate power on each fan and not having any controller! Thanks for Watching Subscribe

[@CosmicBlackstar]

dude clean your pc :D but in all seriousness i want to ask i have conected fans like you 3 fans work fine rgb and fan spining but the rear fan spins but only 1 led working any help i would apreciate and there is this white molex with 3 pins inside that conects to all those fans i tried to remove it and turn on pc fans spin ok but no rgb connected the white molex again and rgb works but still the same issue so pls help (; _;)

[@SidTheGeek]

As I have Understand it maybe some of your rear fan's LED have gone! have you tried connecting your rear fan to different molex port (coming directly from PSU). are you using any Molex extension or converter ? it might be cables sometimes but I doubt if you can confirm that rear fan RGB Led works in different port.

[@CosmicBlackstar]

@@SidTheGeek i dont think thats the case because sometimes it randomly turns on and it will be on till you shut down pc and turn it on another day it happens again like in loop :D and that white molex i was talking about came with the rear fan i didint buy the fans it was pre installed when i got the case its argb fans

[@CosmicBlackstar]

@@SidTheGeek i personally think that that white molex that came with fan might be broken or dosen't give enough power or dosent make proper contact with the pins because one time the 1 pin fell out from that molex i searched online to buy a new but cant find it because all its shows me are molex to sys-fan and i dont need that so i will buy new fans with hub or how you say it in english basically the thing that controls the fans :D

[@deathbody8817]

isn't there any way to control them ? kindly mention me 😥

[@SidTheGeek]

Unless you connect the third wire into color switching remote to each fan. but that will make cable management messy. which can cause shortage/damage to your PC components

[@deathbody8817]

@@SidTheGeek thanks to you for the information ☺️🤗

[@SidTheGeek]

You're Welcome! new vid uploaded

[@theprozix1110]

setup 10/10 duh

[@SidTheGeek]

Thanks for watching Please Subscribe

[@gan3sh_gaming]

🔥🙌🔥

[@SidTheGeek]

Thanks for stopping by ! New vid uploaded

[@ВладимирЦанков-ф9я]

can I chain like 5 fans with molex connector together ?

[@SidTheGeek]

Yes you can! _Thanks for stopping by be sure to _*_SUBSCRIBE_*

[@arah7727]

How can I turn these led lights off?

[@SidTheGeek]

You can't ! the only way is to remove the cable! please support us by Subscribing to our channel there are tons of amazing informative and entertaining videos for you

[@TE_53349]

i done this and only 1 of my 6 fans light up

[@SidTheGeek]

It might be due to the one of the Fan's molex pins (male side) is faulty

[@JunjunGame]

good like 19

[@SidTheGeek]

Thank you! Cheers!

[@Booba44GamingLLC]

🙌🙌🙌🙌🙌

[@SidTheGeek]

Thanks for stopping by New Vide Uploaded