How To: Samsung Dryer Drum Support Roller Assembly DC97-16782A

[@DamnIvyThatYou]

The man works miracles and provided the most perfect instructions I’ve ever followed. Even if the wheels don’t looks worn or any different than your replacements you’re swapping out, trust that you still need to. And might as well do all 4 while you’re in there. Cheers!

[@appliancepartspros]

Thank you!

[@josephconti3480]

this is one of the best instruction videos i changed my drum rollers in a flash he showed all the key points clearly with no extra bs

[@nvra75]

Excellent video. Purchased the OEM parts and did the service myself. Changed all 4 rollers, tensioner and belt.. Cleaned out a bunch of lint from the housing and vent line. This should definitely extend the life of the dryer.

[@appliancepartspros]

Glad the video was able to help you with your repair!

[@mikeolson4616]

Thanks for showing the steps. Made it easy to change out the rollers and the idler/pully. I did not have to deal with the water line nor the heater because I used an open end 11mm wrench (instead of a socket) to get behind the back roller wheels. Unfortunately I forgot to retrieve the wrench before I reassembled the dryer: well at least I know where it is if I ever need it again.

[@humbertonoronha8597]

Absolutely the best video on KZbin! Thank you! You just saved me from buying a new dryer, because I was not going to pay $400 for someone to repair my dryer.

[@ronaldcash387]

Thanks a bunch for the excellent video. Your commentary is punctual and thorough at the same time and your video and angles are exactly what's needed. I'm a proficient DIY'er but this made the job a breeze. I was able to get the back rollers done without removing the rear bulkhead, saved me a few screws worth of work.

[@jonp8201]

Excellent video. I can echo all previous comments on how instructive this is. Saved me a lot of money. I’m now going to check my toolbox to make sure I haven’t left any tools in the dryer like our fellow reviewer. 😂

[@appliancepartspros]

Thank you!

[@gammy6363]

Fantastic video, your instructions were spot on and exactly what was needed to fix our Samsung dryer. Bought the roller kit off Amazon for $40 bucks. We tore it down replaced all the rollers, pulley and belt. It's as quite as it was new. Thanks for posting.

[@PoeLemic]

Wow, hey, I just took mine apart again today (07-03-2020 Friday), and I have Samsung dryer exactly same as yours. And, damned, if the back rollers weren't fallen off the supports. They burned off. I had done repairs at Christmas and greased them -- when I cleaned it last (only 2nd time at Christmas of 2019), but I replaced mine today with new ball-bearing ones. The old just have grease on them, and one was LOCKED and another had BURNT OFF. So, I had to clean everything out, but it's back up and going. It was a late morning to early afternoon job. So, I even replaced the tensioner wheel arm -- to get the new ball bearings. Also, you might eventually have to do that. But, thanks for your video. It made me know that I could open it up and see again what was wrong. People like you give me the confidence that I need to accomplish the task. [Honestly, thank you for this video. Made me know that I could do it.]

[@zekeo1522]

This guy is a life saver! Very thorough video. Made this easy for me. Also saved me some money for a technician to come out! Thanks again for posting this!

[@ScottMattes]

I am back for a refresher on doing this and I am once again struck by how easy you've made it by doing this (and other) videos! Thank you. O, and it always seems to be the back rollers that go bad, meaning i have to watch the whole video (just once, why couldn't the front roller/s go bad)!

[@ScottMattes]

I just got done and that dryer is so quiet now - thank you! Two gotchas: the reason for disconnecting the water line INSIDE the dryer is because there is a water line you gotta disconnect on the OUTSIDE of the dryer (well, I did to get at the back screws in our form fitting washer / dryer nook)! Second gotchya, sliding the exhaust pipe on the back of the dryer into the rest of the exhaust pipe (again, that really snug washer / dryer nook)!

[@ericrosete6595]

Outstanding Instructional Video... one of the "Best"!!! Easy to follow and emphasized key points during the video.

[@richardgrigg1837]

Thank You for the great video! It helped me immensely so I could replace the right rear roller. I could tell which wheel was bad since there was a pile of metal shavings just below it. I heard that the wheel closest to the heater is the one that seems to go bad the most often. My Samsung was a little different: 1) no bracket behind the one wheel. 2) the light connector was up by the control panel instead of by the light. Thanks again - I am writing this as my dryer now is running almost silently.

[@KurtJohnson-q6s]

Great video with the step by step instructions!! Our dryer is quiet again!

[@appliancepartspros]

Thank you!

[@stevebetker829]

Thank you. Could not have figured out how to change the pulley and back rollers without your instructions. The machine would have to go to the recycling center. God bless.

[@Mioquacoonacaw]

your video was informative and helped me with fixing a Samsung Dryer dv50k8600ev. The Assembly was similar enough, I needed to know just what sizes of wrenches to get at the hardware store. had to replace the rollers on the rear bulkhead. Thanks!

[@flytheskymyway]

Great video. My drum was pink at the front when I removed it for the first time. I wonder if it matters?

[@RandyKrakowski]

QUESTION: Does anyone know if the rollers should be greased a little? So there is not straight metal spinning on metal?

[@richsharp1524]

holy this was the easiest repair .... thanks to an awesome video 😊

[@appliancepartspros]

You're welcome!

[@MrOohbindabie]

Great video explaining in detail how to disassemble a samsung dryer. Used it to replace the belt, idler pulley, and drum rollers for a samsung model dv42h5200ep/a3.

[@scooter8187]

Great video for this repair! There is another similar video out there, but this one shows a bit more detail that ended up being very helpful.

[@philh1245]

you're just going to say that and leave us hanging? Come on man atleast tell what's the title of that video and by who?

[@bearcreekdesign5359]

Thank you so much for these very helpful videos. Allows informative and the best customer service from APP.

[@angelrobledo2252]

Gotta say , very informative and helpful!

[@nextlayersecurity]

going through this replacement as well. I'm surprised the rear RIGHT roller mount is so flimsy. the other three roller mounts are well supported. The back right mount is not well designed. when I push down on mine (Samsung dryer), the bottom back metal flexes and slightly dislodges the rear connection to heat tube. That small bracket (you also pointed out in video) is very small and doesn't provide enough structural rigidity. I have to believe this is why my dryer constantly leaks dust. I'm checking the parts breakout to see if Samsung replaced the original OEM back dryer shield to newer version (with hopefully a new/better design).

[@josephnewnum257]

Thank you for making this video. Saved me a couple hundred bucks

[@ГуляАйзаматова]

Thank you.Very informative video. Helped me to fix my dryer.

[@appliancepartspros]

You're welcome!

[@billbrooks3147]

Best repair video I’ve ever watched, Bravo 👏🏾

[@TheCkwalli]

Thanks for putting this together.

[@mikiegroce7121]

Thank You!! Next time I’ll follow your example and use gloves. Only needed 4 stitches removing the roller!! Lol

[@Vajravir]

The model shown in the video above is DV405ETPASU/AA. I hope the working is the same for DV56H9100EG/A2

[@Engineerboy100]

Excellent video! Great job, Thank you!

[@appliancepartspros]

You're welcome!

[@funtobedone]

Awesome - very well done, saved me time, aggravation, and money!

[@alfredbedolla9745]

@8:25 with the grace of a baby duck 🤣

[@biakbairok]

Thanks you for the video. I can fixed by my self and saved lots of money.

[@JaimeGonzalez-wx1gw]

How much should it cost including labor if I have 2 rollers that need to be replaced? Also, how long should the rollers last? I can’t do it myself due to injury, so I need to hire someone.

[@stopnomaddness]

Thank you!I have vibration AND horrible squeeling! I have ordered the entire tension applying assembly spring/belt/drum rollers/ tension spring I have found a deal on the blower wheel for the vibration issue

[@samrabito366]

Is this for model DV338AEC/XA also? I have to replace rollers on mine.

[@jimbo8743]

Great detailed Video 👍

[@alexkogan625]

Thanks for the video. The only inaccurate thing was that there were 7 screws to unscrew at the back of rhe dryer (minute 7:30) - and not 6 as per your instructions. Otherwise the bulkhead wouldn't release. The seventh screw was on top of the air exhaust. Anyway - you've helped a lot! Thanks again!

[@ToddNadeauTheWeigh]

Thank you, very helpful!

[@appliancepartspros]

You're welcome! Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.

[@frankieflashlight7301]

I repaired my dryer! Yeeepy !!

[@appliancepartspros]

Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.

[@soltero5605]

Awesome video thanks so much.

[@bcarter395]

Great video; thanks!

[@sincerelyyourscg8562]

Great video

[@KINGSRANSUM]

How do you know when the rollers are going bad

[@shaunmwoolley]

What exactly is wrong with the old/bad ones in the video? I am pretty sure I have an issue with the rear ones in my Samsung dryer.

[@appliancepartspros]

Our videos are meant to serve as examples of a repair, so sometimes we're replacing functional parts. That said, parts that are broken don't always look broken. If you ever need help confirming that a given part is the one that is causing your problem, which part you need for your unit, and whether you need to replace just one part or multiple, get in contact with us. We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx We’re here to help 7 days a week.

[@danielrichardson1459]

Should i be adding a dab of grease on each new roller?

[@appliancepartspros]

Grease is not required to install this part.

[@satheessaba145]

good job

[@belindaslabinski8049]

I cannot get the roller pins out. Used wd40..wdspecial and pn blast

[@appliancepartspros]

What is the model number of your appliance? We can check and see if there is something else that you can do to get those removed.

[@KhosrowEskandari]

❤

[@lostammo9026]

In all the videos they don’t turn it on so we can hear it lol

[@matthewgrubb1778]

Saul Goodman?

[@appliancepartspros]

Is there anything we can help you with.

[@matthewgrubb1778]

I’d like the Hoover Max Extract Pressure-Pro, model sixty.