How To: Samsung Water Filter Housing Assembly DA97-11435A

How To Replace: Samsung Water Filter Housing Assembly DA97-11435A www.appliancep...
Symptoms: there is a puddle under the drawers, there are no ice cubes in the ice maker, water won't dispense.
Tools: Phillips screwdriver, two flathead screwdrivers, utility knife.
This Samsung made Refrigerator Water Filter Housing Assembly replaces the following older part numbers on Samsung Refrigerators: 2304625.
Buy the new Refrigerator Water Filter Housing Assembly DA97-11435A here: www.appliancep...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@cassieume]

Hi thank you for the video! There is water in the tank but blue line isn’t getting water the water doesn’t dispense. Water line is not frozen I checked. Is there way to get rid of Samsung water house unit and connect the water line to top of the fridge? I just can’t afford buying a new housing unit. When I dispense water is it connect to the housing unit?

[@peterchomczynski4297]

Very straightforward video. Much appreciated! I used this guide for my Samsung RF23J9011SR/AA model refrigerator. The part number for the filter housing was DA97-15417B but the process was practically identical. The only differences were that a) my unit has no lower freezer compartment ice maker (has only the upper ice maker/dispenser); and b) disconnecting the blue water line did not require removing the small trim pieces (at 3:50) around the door hooks.

[@thomasesparza9175]

Great instructions! The only problem I had was removing the right crisper drawer because the door only opened at a 90 degree angle. I removed the bottom door storage tray, but still didn’t have enough clearance from the door edge. I finally discovered that by lifting the door slightly, it allowed the door to swing out more giving me adequate room to remove the right crisper drawer.

[@jefftobias2226]

Just did this step by step. Absolutely flawless install. Thank you so much for the great instructions.

[@wildnmild]

Nice video. Wrong refrigerator. Please make one for Samsung RH29H9000SR/AA0000

[@gseryogin]

Thank you for a great video! It really helped me with the replacement job and saved some serious $$$ In my case the little valve that goes to water filter stopped working. In fact I didn't even needed the whole assembly to be replaced. The problem was a small o-ring that got out of place. In order to get to it, the whole unit had to be removed and disassembled. Good to have my water running properly again! Thank you!

[@renatasharman1568]

One clip broke on the right and the shelf won't separate from the filter housing. Now what? I need to remove the back panel because the fan is rubbing on ice and I want to melt it fast with a hair dryer. Thanks!

[@appliancepartspros]

Have you been able to get your appliance repaired? What is the model number of your fridge?

[@brookeandroger]

Great video. One question is with the new water assembly housing it only has two electric cords to plug in (instead of three) as you showed. We saw you plugged both right next to each other but what happens if you plug the smaller cord on the other side. It doesn't look like our new assembly cord is long enough to plug in side by side . Thanks!

[@appliancepartspros]

What is the model number of your fridge? Our videos are just to help give you a general idea on how to do the repair. It may not look exactly like your model.

[@brookeandroger]

@@appliancepartspros Our model is RF4267HARS

[@brookeandroger]

Our model is RF4267HARS

[@brookeandroger]

@@appliancepartspros Our model is RF4267HARS

[@c-ho1165]

Great video, as an Appliance Technician for 27 years your vids have saved me from looking like an idiot in front of customers. 👍🏻

[@victorh.5455]

Thanks is a very clear and explicit video to understand and give service i'm subscribing to your channel thanks.againg

[@guayacachula]

mine is uneven when i put back in. So confused as to why!!!

[@mike2021247]

Great video!! A++

[@jagannathpotdar144]

Good