How to Save, Backup and Manage Parameters in EZCAD (2022)

[@pure.intentionzz]

Thank you! Got my Laser couple days ago and you have been my unofficial teacher! Much respect!

[@LaserEverything]

Love to hear it! Congratulations on the new laser!

[@virtusangel1510]

Is there any video with your settings ? Thank you for your videos

[@LaserEverything]

They're spread around the videos. There are 3 or 4 up now that detail various settings and new videos are uploaded every week so keep an eye on the channel to get them all!

[@ciko271]

Hi, I did not understand where i could download your parameter library. Thank you

[@LaserEverything]

masters.lasereverything.net

[@JackInTheShop]

I am glad you made more videos.

[@LaserEverything]

Thanks! Me too!

[@darnellthomas6340]

After signing up for the annual would I get a set of parameters or would it still be one parameter a week? I have the Raycus 50w and very new to fiber lasers and want to try different things and settings.

[@LaserEverything]

Things have changed quite a bit since this video Darnell. We're moving over to the Laser Master Academy which includes instant access to my fiber and CO2 parameter libraries which get updated regularly, as well as bonus episodes of the laser source podcast, hundreds of hours of bonus livestreams and a whole lot more. Check it out over at masters.lasereverything.net

[@aydinlaser]

did you try engraving double colored plastics Rowmark like

[@LaserEverything]

Dark colors can be marked decently on the fiber, but it can not be cut.

[@dawoodnoorzai2929]

How do I download this parameter? Please tell me please!

[@MrBigleo25]

How can I get these now

[@pedrorodriguez-lh2py]

Can this parameter work on a 50w sfx-50gs...

[@LaserEverything]

Should be fine, just want to reduce your power a little bit since you're using a higher wattage machine.

[@afifabderrahmen3599]

Hi. Thanks for a clearly ideas. How can i convert or save as a file.ezd to .dxf or anothor extention to modifie in rhino. Best regards

[@LaserEverything]

You can convert TO ezd files, but not FROM them unfortunately.

[@DerGreve]

Another Nice Video, thank you very much!

[@LaserEverything]

Happy to help, thanks for watching!

[@LUCELLON]

hi, i'm following you and i learned a lot from you. thank you for that. Unfortunately my parameter library is empty. I tried the method you showed. It was not successful. The file appears to be 1kb. If you have 130kb. Could you do file sharing?

[@LaserEverything]

We offer our parameter library at masters.lasereverything.net/

[@mehdiahmad947]

@@LaserEverything After I installed Windows and saved all grades related to gold cutting and engraving in the program, but now when I work with the machine, I feel that the machine is working weaker than before, which means that the cutting power of the machine has decreased greatly. I previously set the speed to 200 and the power to 100. The frequency is also 50. My device is 50 watts. In your opinion, where is the problem with the device? Is there a place in the program where I can increase the cutting power?

[@mehdiahmad947]

@@LaserEverything With the speed and power coordinates that I said, it used to cut a 50 micron sheet with 12 revolutions. But now with the same coordinates, it cuts the same sheet with 30 revolutions.

[@mehdiahmad947]

@@LaserEverything wooble size is 0.04. and 0.05...is that enough for cuting?

[@mannehurlbatt2860]

Thanks for the video. When I save a parameter, draw up a new object, and select that parameter from the library, the pen in the parameters window does not change from Default. Am I missing a step?

[@LaserEverything]

Hmm. Doesn't sound like you're missing anything but its hard to tell without watching you do it. You could either upload a short screen capture video to the Discord server or watch one of my other tutorials where I'm changing settings and follow me as I do it to make sure you aren't missing a step.

[@x_lans3]

How can I get them I really need them and thank you

[@LaserEverything]

masters.lasereverything.net

[@anandreddy6835]

sir how to creat multiple ezcad software for 100mm,220mm

[@LaserEverything]

kzbin.info/www/bejne/fIu3aq2FpZ6Gopo We cover all of that in this video

[@royalprints9203]

do all the parameters come on one file or you sell them one by one ?

[@LaserEverything]

All together for supporting the channel for at least a month via the LMA

[@mendy770]

where i can get the parameters library?

[@LaserEverything]

masters.lasereverything.net/

[@BLANCAROJAS1000CC]

Just download your parameters from your channel but having trouble opening files also just got a new computer that you recommend but doesn’t have zip files or any app to open files what do you recomend bought the thinkpad computer with windows 11

[@BLANCAROJAS1000CC]

Also I have the fiber laser 30W 175 mm lens

[@LaserEverything]

Please message "LE Support" on the LMA app!

[@avijieet_santoor]

hi, how to get 50 watt parameter settings. link is not opening

[@LaserEverything]

Are you an LMA member? Best to message on there.

[@haim6563]

Hey. Can make a video for hatching+parameters togther? Thanks a lot.

[@LaserEverything]

Just like a general overview of how hatching and parameters work in overall?

[@haim6563]

@@LaserEverything how to save hatch setting Is it possible to start marking with just a click? To set parameters for all kind of materials and just to choose from pen colors

[@LaserEverything]

You can only save hatch settings in EZCAD3 - a few people on the Discord server have discussed it and know how to do it - I'd ask around there. Unfortunately I only have access to EZCAD2 at the moment so I'm unable to make a video on that topic. You can join the discord here: discord.gg/BQg28XH6Mc

[@qwestt1304]

Do you save system parameters the same way?

[@LaserEverything]

System parameters should save automatically.

[@darenweidner3408]

Thanks for the video very helpful

[@LaserEverything]

You got it!

[@user-hamza.515.]

Is there a link to download the files please

[@LaserEverything]

masters.lasereverything.net/users/onboarding/plans?from=https%3A%2F%2Fmasters.lasereverything.net%2F

[@mehradamino3189]

Can you download it?

[@shaikhsainur7435]

very informative video as it is from basis its more effective thank you for making this video

[@LaserEverything]

Most welcome, glad you got something out of it.

[@javieruriel6764]

do you sell the parameters for a raycus 70w lens 110 and 70mm?

[@LaserEverything]

We currently don't sell parameters, but we do have a free pack of starting ones as well as a a community sharing area where everyone can share their personally tested ones. Check out our site and you can just grab them and adjust as needed :)

[@sathurshananthi9558]

The monitor screen is small and 'select parameters from library ' is no where In screen. How to access that option?

[@LaserEverything]

you can drag the entire "Mark Parameter" box out of the side panel so it isn't constrained in the little window and then make it bigger to see all of the options.

[@aljaraque83]

Como puedo comprar la biblioteca y los parámetros hatch para láser de fibra de 50w. Saludos amigo .

[@LaserEverything]

Patreon.com/LaserEverything Parameters are available for the $8/mo tier and up. :)

[@aljaraque83]

@@LaserEverything también tendré acceso a la configuración hatch?

[@LaserEverything]

Hatches are included in a downloadable spreadsheet on the patreon page! Includes line distance settings as well!

[@aljaraque83]

@@LaserEverything ok gracias amigo por tu atención , en agosto pagaré el mes . Gracias por la ayuda y seguiré viendo tus vídeos , tengo problemas con el inglés , hablo poco pero se entienden bastante bien . Saludos .

[@LaserEverything]

Happy to help, thank you for watching :)

Thanks for video. I'm new to this job can you give me these settings?

[@LaserEverything]

I'd recommend joining the discord server - link is in the description. People there will be happy to help you out.

[@DiseñojoyeríaMarthita]

Hello, thank you very much for all the videos you have uploaded. I tell you, my name is Jonatha, I work for a jewelry store and in recent weeks they have delivered a fiber laser bogong to me but... it is not taxing on the material, I have already adjusted the laser parameters, I have checked the voltage, I have uninstalled and installed the software, we have checked the energy in the facilities and I don't know what else to do. I have searched for manuals, tutorials, everything to find guides that help. And I have a query, I use ezcad2 and in the IO state window the lights for io input 0-2-3 are red. Do you know what those lights want to tell me? I will be very grateful to you.

[@LaserEverything]

Sorry for the delay. Unfortunately I'm not able to know for sure, as that can change depending on physical wiring/configuration from the vendor. There are many things it could be, but when getting started it can be most frequently the settings, the focus height between lens and material, and then there are more issues as well that may need to be addressed by vendor potentially. All of our shared parameters are available if you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, I hope that may help. In the case it is something beyond focus and parameters, joining one of our communities so the support team or community can help would be the next best thing we can offer, or speaking with the vendor to help troubleshoot to ensure it isn't a physical issue.

[@JOSEPHSMITH-fn1dd]

Hi, i have leant from your video thanks and i have a 30w fiber laser mactron machine can you share the parameter of different types of metal and nonmetal marking.

[@LaserEverything]

All of our shared parameters are available if you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)

[@JuhiMansinghani]

hi thankyou for sharing , can i know the parameters for reflective yellow metal(not gold) , in the begining S 800, P 90,F 10 was working for that material but when done repetetively , the laser is not able to mark can u share some tips or parameters for a 20 w fiber laser marking machine

[@LaserEverything]

Sorry for the delay. It kind of depends on what the material is, if its plated, and what lens you may be using. Our shared library is on our website for download for free, thanks to the support of the LMA members, but if you need help tuning more, join any one of our community's and post a thread with the details and that way our support team and community can dig in to help.

[@Mysteriac333]

I am running aluminium dog tags services in iraq I'd appreciate a video about aluminium settings prams from hatching to clean up settings Thank you Your work is awesome :)

[@LaserEverything]

I added it to the list :)

[@healthcarerescuepilot594]

Parameters vs pens? Help please

[@LaserEverything]

Parameters are the settings for the current pen. The default is black. If you have a black square and a blue square you can set the two pen colors to mark with different parameters in the same run. Pens just allow you to do that.

[@razz0r1980]

Awesome video. Nice one 👍👍

[@LaserEverything]

Thanks, hope you got something useful out of it! More soon!

[@jiyarjiyar8434]

Thanks.

[@LaserEverything]

Yep!

[@lumigraphix]

hello, great video thank you, but i just subscribe and can not see any param, please help

[@LaserEverything]

Please message us on the LMA! masters.lasereverything.net/

[@easyprint1658]

Hello friend, how much do you sell me the parameter library for fiber laser engraving 30w jpt. I want to engrave tumbler with gold color can you?

[@LaserEverything]

You're unlikely to get a gold color on steel tumblers without a lot of work or some kind of catalyst. Our parameter library is available by supporting the channel via the laser master academy (there's a link in the description) but we don't currently have a preset for that specific use.

[@shahregift3865]

Hi how to find and download parameter libreri?

[@LaserEverything]

All of our shared parameters are available if you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)

[@cmlextremevisual3951]

Hola puedes ayudarme mi ezcad no guarda los cambió que le hago por ejemplo idioma puerto del pedal de accionamiento etc

[@LaserEverything]

No Español, lo siento

[@cmlextremevisual3951]

Hello, can you help me, my ezcad does not save the changes that I make, for example, the language of the drive pedal port, etc.

[@cmlextremevisual3951]

Help

[@gajahmada415]

Hi Thank You For Sharing..Can I Know The Parameters Of Black Laser Colour on 18K white Gold and Black Colour In 18K Yellow Gold? ..Or I Can Buy The Parameters Maybe? Thank You, Healthy Always 😀🙏

[@LaserEverything]

If you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)

[@電子電子-u5o]

Manage Parameters would you share this file

[@LaserEverything]

masters.lasereverything.net

[@hiren236420]

Hi @Laser Everything , I have visited your website to sign up. Is there any chance to pay with other platform like Paypal for monthly subscription ? Thanks Hiren

[@LaserEverything]

You can buy annual subscriptions with PayPal at www.lasereverything.net/shop

[@hiren236420]

@@LaserEverything thank you for your reply. But I would like to go monthly subscription not annually at the moment as I am new to laser master. Thanks

[@LaserEverything]

Unfortunately monthly subscriptions are only offered with credit cards right now Hiren.

[@hiren236420]

@@LaserEverything ok I will sign up with credit card. Hope it will be secured. Thanks mate.

[@gunhappyie]

Thanks for that great videos.... I'm a little old fashioned and either wing it or write my settings down 🤣🤣 My question ...I've saved once but is it true that when you when you click save Ezcad only saves that pen colour ? And how do you match that to a hatch setting?

[@LaserEverything]

Ah yes, this would have been good to cover in the video - I'll have to make a follow up. Basically nothing about saving parameters has anything to do with pen colors when working with the library. The parameter is only going to apply to the pen color you've selected in the top right corner. When selecting a pen you want to select the pen from the row of square colors, *not the list*. The list is for reference only. So if you click black, then load the default parameter then click blue and load the favorite parameter - all black will use default all blue will use favorite. Finally, if you use the Current Param Save As function it's going to save whatever color you last selected. If blue in this instance was the last thing you clicked that would be the color saved to the setting. Once saved that parameter could be applied to any color pen - for instance you can click the yellow pen now, uncheck default then select a new param from the list and hit ok and it will apply that saved param to the yellow pen. It's also worth noting that saving your EZCAD project as a .ezd file will save the pens in their current state, whether or not they were saved to the library. Long story short pens and parameters are completely separate things. You DO have the option to apply a param to a pen but that pen should not be treated as a save bank for that parameter because every time you open a new project those pen colors are reset to default. Phew. Sorry for the long winded explaination. I hope that helps. If my response is confusing I will clear it up in the next video! -Alex

[@mehdiahmad947]

Hi.i'm one f your subscriber from 2years age.and i learned a lot from you.Last week my windows laptop crashed and I had to reinstall it but unfortunately I forgot to backup my params sittings.😔😔 How can I have your param settings for me? Can you send it to me?

[@LaserEverything]

Oh no! Our parameter library is available at: lasereverything.net/

[@mehdiahmad947]

@@LaserEverything sorry.but i can't find it..

[@LaserEverything]

The parameter library download is part of our LMA membership: masters.lasereverything.net/

[@shaikhsainur7435]

how can i contact u personaly?

[@LaserEverything]

What can I help out with?

[@shaikhsainur7435]

@@LaserEverything u can help me out with teaching me how to use the fiber laser machine. in whole youtube ur videos are understandable. i need help with parameter for that need to have ur contact information throught whatsapp.

[@shaikhsainur7435]

@@LaserEverything i promise not to waste ur time i really need help in using this machine

[@LaserEverything]

I don't contact people personally about parameters, but again there is a lot of help for you in the Discord if you'd like to join. The link is in the video description.