How to Save Money ● ReGlue and ReAttach Your Own Rearview Mirror

[@chrisnotap]

Here's the link to the adhesive ! USA ● Rear View Mirror Glue .... amzn.to/2pv9d77 ● Razor Scraper .... amzn.to/2BWKJcG CANADA ● Rear View Mirror Glue .... amzn.to/33678A4 ● Razor Scraper .... amzn.to/2PAXu4A Full Transparency! A small portion of each sale goes from Amazon's pocket to my pocket with no additional cost to you! Thanks for your support. It's very much appreciated!

[@TheBroDude777]

I admire your honesty. Thanks for the help.

[@SunkissNia]

I'm in the process of moving and starting a new job and my rearview mirror fell off on the road! I was freaking out and crying! I just wanna say today my bf and I followed these instructions and it worked! We are so GRATEFUL because we are on a budget for funds and were worried that we would've had to go to the auto shop to get it fixed! You saved us the time and MONEY so we thank YOUUUUUU so very much ❤

[@GaryCavallaro-mc5io]

Very good video, and it is the exact process 📝 for replacing the rear view mirror to your windshield follow these instructions 2 The T and it will not fail... 🪞 and also save you 💸 money 💰. ✌🏽🇺🇸

[@patrickchang8163]

The best part of this video is the speed and COMPLETE thoroughness of steps! No time for bs thank you!

[@chrisnotap]

Thanks for that great feedback!

[@ashtonsmith5065]

YES - to the point. Clear and precise. TY

[@SamTheGirl210]

Agree!

[@lilycara5249]

In agreement

[@gogo12able]

This is what am talking about breve precise to the point not a lot of blablabla great video appreciate it very much

[@abergethirty]

my truck doesnt have screw. there is somd kind of metal retaining clip

[@Ejay96]

@@abergethirty How did you remove it?

[@aiishunVBoii]

I've never heard you talk about this

[@johnapicella3547]

Mirror fell off on my 97 Suburban. This is 2022. I’m the original owner. This truck owes me nothing and still runs like new at 187,000 miles. Your vid was clear and explained how to do this repair perfectly. Hardest part was scraping off the old glue from the metal button that holds the mirror. Essential to place it in the mirror to scrape it. Took at least 15 minutes just to do that if not more. Thanks for posting this. Subscribed.

[@MrAcademicResearcher]

Your instructional video was brief, to the point and you didn't miss critical steps. If other KZbinrs would follow your example and cut out the unnecessary dialogue, then it wouldn't be so frustrating to watch DIY videos. Well done sir. Followed your instructions and used the same products you recommended in this and everything worked out like a charm! Thanks for posting this Chris. You did superb job!

[@chrisnotap]

Thanks for that great feedback!

[@jordans4396]

This video took me from crying in a parking lot in frustration to knowing how to fix my problem. Thank you

[@chrisnotap]

Glad it helped!

[@youngjuggler]

Rockstar! Savior!

[@sammclaurin9296]

I was at the end of my rope. I had given up all hope. The bullet was in the chamber and then I saw this video. Now I have a fixed rear view mirror

[@peacepantherproductions]

Same - I’m crying now- have to see if the metal part removes from mirror now… ugh..

[@SnowMexican690]

You dont need a rear view mirror bro. No need to cry lol

[@SpeegBJ]

The Permatex instructions = NO! This video = YES! Thank you Sweet Car Fixer Geezus.

[@richardg3232]

Good Video...short, concise and pointed out a few things I wouldn't have thought of. And, no music! Thanks

[@amandawolfinbarger8787]

Great video. Short and to the point, and showed us exactly what to get. 10/10

[@jaypocaigue3997]

Chris Fix and Chris Notap. The two Chris's that have helped me sirvive being an adult

[@bena.189]

Thanks for speaking loudly and clearly.

[@elmosdf]

Short and to the point. I usually have to hear “how-to”videos at 2x speed to get through the nonsense. Left on normal speed and explanation was perfect. Thx

[@chrisnotap]

I try to do all my videos like that! Thanks for the feedback!!

[@stephenwooten8714]

Chris- Terrific video. Straight forward, to the point, and good video/audio. Who in the world gives this a thumbs down? I'm very grateful for your efforts.

[@chrisnotap]

Thanks for that great feedback and yes, I wonder the same thing. I guess it's people just having a bad day.

[@cheefmynyon8348]

I used this particular Permatex product a year ago to fix a rearview mirror similar to the one in your video. Just today the mirror came off again so I thought I'd do a bit of research before attempting the fix a second time. Your tip about wiping the back of the button with the towelette is golden; I believe the repair failed as I followed the printed instructions carefully yet the bond between glue and button failed. I remember having to scrape glue off both the windshield *and* the button when the factory adhesive failed; this time all the glue remnants were on the windshield and none were left on the button. Thanks!

[@Kiwikiwikiwioyoyoy]

Straightforward video for straightforward fix! Everything you said aligned with what I was thinking, but it was very nice to have your reassuring guidance and confirmation. Thanks much!

[@kingfranko]

5 years later and this video is still the best diy for this particular problem that I've seen

[@TheBroDude777]

Chris, Your video is detailed, concise, and thoroughly helpful. Thank you for helping me and so many others with this quick vid! I realize it has been five years since you posted this instructional piece, but I hope all is well in your life. Have a great one!

[@chrisnotap]

Oh thanks for that nice feedback! Life is good!

[@chilipalmer99]

This is why I love KZbin. Followed the instructions, worked perfectly. Thanks!

[@gwlowe]

Wow, things have changed over the years. I'm really glad I watch this. It is simple and fast. Thanks Chris you did a great job.

[@davek.1186]

thanks so much for uploading this! just reattached my rear view mirror with minimal hassle thanks to these instructions.

[@mrfk9d]

Excellent teacher ! Thankyou.

[@thedisconnectedwife4165]

I'm so glad I watched this before attempting this.

[@MovieMakingMan]

The temperature where I’m located was 95+ degrees so 20 degrees hotter than the 75 degree limit they recommend. I put a soft ice pack in a towel and put it on the windshield over the button area. I anchored the other end of the towel with a weight on top of the roof to keep the towel from sliding off. I felt the glass inside the car and it was 65-70 degrees so well within the range to install the kit. So far it’s working. I had my windshield replaced just before the pandemic hit (February 2020) and they used what looked like double sided tape. I was surprised it lasted as long as it did. The windshield was $225 cheaper than Safelight. They wanted $350 to install it. I had a new one installed for $125. Safelight rips people off. (8-22-20)

[@whatsnewonthemountain]

Someone has to pay for all their advertising so the customer does.

[@MovieMakingMan]

@@whatsnewonthemountain Same for the constant drug, insurance and other ads. We pay for all of it. Imagine if we nationalized several key industries like energy, drug companies and insurance. We could save trillions in waste in ads, duplicate bureaucracies and how those industries buy politicians to screw us even more.

[@wxfield]

Hi Chris. Finally had the opportunity to try-out your frying-pan-pizza hack. To say the least, I was skeptical. But through a confluence of events I was presented with a pan, a lid and 3 leftover pizza slices..so I tried it..and I can't believe leftover pizza can be that great. As you say, "even better than when it comes straight from the pizza shop". Thanks!!

[@michaelpeterson4348]

Very nice video clear perfect English no stupid music in the background good camera work great job thank you

[@chrisnotap]

Glad you liked it!

[@loooii8816]

You sir saved me a ton of money! God almighty I was thinking of having to bring the vehicle to a local glass repair shop

[@nekotfarmer]

Kudos for including both Celsius and Fahrenheit temps. Top shelf guide

[@erinmarshall6587]

Thank you so much! My mechanic shop told me they don't do 'glasswork' and referred me out. My auto body place told me it would be a week before I could even get an estimate. With this video and a quick trip to Walmart, I'm back in business. You pointed out some very important steps and kept the vid short and to the point. Appreciate that!

[@chrisnotap]

That's great! Thanks for that great feedback!!

[@minhalraza8791]

found this after already using versachem which worked very well. I did everything like you did but gosh I wish I had found this beforehand...would've saved tons of time researching reviews and various different instructions. this is the perfect how to format, thanks.

[@chrisnotap]

Glad I could help

[@mintymedic3189]

Thanks for your video! I left work today and my window was sitting in my drink holder. I ordered the stuff so I'll see how it goes when it comes. :)

[@Jmad64]

Worked perfectly! Bought the exact stuff and had no issues what so ever! Thanks!

[@chrisnotap]

That’s great!!

[@joyfamily2413]

I followed your instructions,and it works! Hoping it lasts! Thank You!

[@chrisnotap]

Great to hear!

[@angelastevens8268]

Thank you for your help on a hot morning needing to get to work. This video was the only way I was going to fix it

[@justing7168]

You covered every eventuality to prevent failure. Thank you

[@tdav3237]

Great video Chris! You saved me so much time, appreciate the detailed and direct approach w/o all the “fluff”. Thanks,

[@thehabitatgroup3650]

Great video...I was lost with the instructions on the kit and this cleared it all up for someone who is not handy at all...like me!

[@MrJoeylo]

What a great help. Followed your instructions and now my mirror is back up. Also purchased the same product you used just incase. Thanks man. Good video!

[@joshjoker8863]

Thank you. Straight to the point with clear instructions.

[@catmomlavender3036]

Thankyou for your EASY EXPLANATION! wonderfully simple and easy, straightforward and simple. I truly am thankful for the simplicity which leads to clear comprehension! Thankyou for the tips along the way. I truly hope that things go ok when I get my supplies , but seems like with your help it will!.

[@chrisnotap]

Thanks for that feedback!!

[@ritamurphy9426]

Watched this a couple of times then went out and did it in no time at all. Thanks!

[@ChetanNandikanti]

After watching this video. I feel so confident and now I can say I can do it on my own.

[@PharmacyTechLove]

Chetan Nandikanti it’s so easy after watching this video.

[@thewraith5471]

Dude thank you soooooo much saved me a trip to the auto shop!!! Subscribed!!!

[@MDorps]

Honestly! Great video! Thank you for producing this!

[@Blue-hf7xt]

Thank you, this is the first time I have had a rear view mirror fell off. You are right, the instructions on pkg says use activator only on windshield. It makes sense to do the button too. Thanks again.

[@catmomlavender3036]

I love that he knows better than the manufacturer. 😆

[@arbadas]

Very well explained, nothing missing.

[@chrisnotap]

Thanks.

[@voided76]

I appreciate you brother. My foxbody's mirror does as well. Thank you so much for the lack of crap in your video :)

[@shanewatts1785]

Great video - short and to the point without all that hoopla that so many others do. You’ve just earned yourself a like and subscriber👍🏼👍🏼

[@Infamous.Shinobi]

Very detailed and easy to follow need more like you

[@chrisnotap]

Thanks for that!

[@Infamous.Shinobi]

@@chrisnotap any idea what size that lil bolt that holds the metal piece is?

[@CS-bh4ur]

I absolutely loved your video please make some more automotive videos like this I love it

[@angelicadempsey3900]

Thank you so much for your video - helped me to fix the rearview mirror in my dad’s truck! ❤

[@mubarakmaddi873]

Gum name plz

[@AffordableREI]

Thank you!! This may seem SOOO simple, but its really helpful to use who dont know anything about cars. Thank you!! ☺☺☺☺☺

[@chrisnotap]

Glad it was helpful!

[@MDorps]

Love your barn doors in the background by the way!

[@chrisnotap]

Those are fake doors I made and installed them on the face of my old one piece solid metal garage door.

[@mr.tooproc1880]

GreaT Video!!! Very simple and easy to understand. Precise ad straight to the point. Keep up the GREAT work!!!

[@chrisnotap]

Thanks for that great feedback!

[@e-machine-ol1987]

Thanks for the clear instructions and helpful advice

[@mohammedehsan5533]

Wonderful! A real to the point video. The guy explained exactly what I need.

[@chrisnotap]

Thanks for that great feedback!

[@hondhond908]

Am giving you a thumbs up because you went straight to the point. Thank you

[@deemueller6470]

Thank you for all the great advice! I have watched a few of your april fools vids and finally needed help with a DIY project. Im female and do know about some things thanks to working in garage with grandfather and 20 yrs of ex-hubby. (I did help rebuild an MG with another lady many years ago before yt vids(80's-90's). But it has been so long I forgot some simple stuff like this. What you don't use, you will lose sadly. I used expo markers inside to trace instead of tape outside because I was afraid I wouldnt remember round vs flat edge in my 18 yr old jeep. The guy at O'Reillys auto parts sold me Permatex saying it was the best glue they carried for this job. Thought i was subscribed since you wandered into my feed occasionally but found I wasn't. I am now subscribed! I have several DIY projects planned like detailing and can't wait to watch more of your vids on the projects. Many thank you's from a 52yo grandma.

[@infoprofits3394]

Incredible video on rear view mirror repair. Thank you

[@janehanlon2802]

Precise and straight to the point well done

[@FlightSim2703]

Thanks so much for the information, I purchased your recommended glue, and it bonded the mirror wonderful as you instructed. Thank you.

[@dungdoan9830]

Thanks for the video, straight to the point

[@rajgohil4985]

Thanks so much, unfortunately my mirror fell of along with that black tape also some glass too, so there is no way for me to make it straight like you did, so i stuck the button next to it after following you advice, so far it's still holding it ! it doesn't look bad at all since i can not see it! Thanks for tutorial by the way, short and simple!

[@jaliskamclaughlin6395]

Thanks so very much. Easy instructions. Can't wait to try

[@bucket7960]

Thanks for being so thorough and straight to the point!

[@chrisnotap]

Thanks for that great feedback!

[@amandaperez4100]

My mirror just fell off and this helped me so much, I've been so frustrated trying to figure out what to do next, thank you!

[@chrisnotap]

You're so welcome!

[@drewcooper644]

Thank you for the video! The instructions are not that easy to understand and watching your video made it quick and simple!

[@SamtasticOnline]

Thanks for the tips! I needed a replacement button, and the only one they had came with adhesive on it. I scraped off that garbage and used the stuff you recommended, and so far so good!

[@tonimundell4825]

So helpful. Short and sweet. Thank you!

[@morgansingletary7595]

Thank you so much. I did what you said step by step and it worked for my Nissan pathfinder and it saved me a ton of money. Great video.

[@geekoffline]

Thank you so much... I fixed mine today...3 year later your video. Thanks a lot

[@chrisnotap]

Excellent!

[@lemurgrl]

Clear and concise, a perfect tutorial! Subscribed and looking forward to learning more from you. ❤

[@chrisnotap]

Awesome, thank you!

[@victorko5671]

Fabulous! Even including crucial tips too! Thanks!

[@saltydog3394]

Thabnks Chris, quick, easy and to the dang point - appreciate that! now to go fix it

[@Deadend187]

Straight to the point and very well explained 🙏🏽

[@gmp3699]

Thank you for taking the time to post this very helpful video.

[@MyAGGirls]

This just happened to me this weekend. I got in the car and the mirror was on the floor. I tried Velcro. Dumb idea, I know, but I thought it would be a temporary fix until I could figure it out. I'm going to try your advice in this video. Wish me luck!!

[@johannabradley9102]

You thought of EVERYTHING. most informative video I've ever seen. Lol thanks

[@chrisnotap]

Thanks for that feedback!

[@southerner66]

Best tip: Mark with tape on the outside.

[@ash_does_dash]

Quick, right to the business. Thanks!

[@danielbarraza5695]

Chris man come on your killing me I'm waiting patiently on the vape test I want to show people the comparison between smoking and vaping I myself quit smoking because of vaping I've seen other videos but I enjoy your ingenuity

[@chrisnotap]

Thanks for that. Please be patient. I'm waiting for the weather to break to get outside and video it in the same setting.

[@pgo301]

Good video and 'I liked' it. I used the JB Weld about 15 years ago and still have the same van, so I can testify that that also works too.

[@patbrown9755]

Excellent video. Clear simple instructions. Thanks.

[@josephgutierrez9450]

Thanks for all your help Chris!

[@chrisnotap]

Happy to help!

[@FurthermoreJack]

Nice the sound of the job of doing the rear mirror is distinctive

[@irenewarner5333]

thank you ! when you mentioned the temp of the windshield helped. iam going to try locite.

[@sylvan9184]

It did help. I love it! Thank you!

[@pancraziolopez8405]

1000 times thanks You save me a lot of headache

[@Hellcat-x1p]

Woke up, to find mirror on the floor. Thank you for this video!

[@Kingdom-zu6tm]

I wish i had watch videos on this before taking it to the shop.. wouldve saved so much money

[@sandrajo0309]

Perfect thank you I my rear view just fell off and I went and got this stuff I did not know what to do... u saved me some time!! Thanks!

[@romy5123]

Yes! Precise, straight to the point. Thank you!

[@AuXXKeyz]

Why can't most videos out there be as simple as this one? Thank you

[@chrisnotap]

Thanks for that and thanks for the feedback!

[@brettonpelagalli9131]

Great and helpful video! I wanted to upgrade from a normal mirror to an auto dimming homelink compass style but the new one wasn't compatible with my old mount. I was able to swap them out! Thanks for the information

[@bobesbiskit4111]

Great video Mr. Notap. My mirror fell 4 different times, used gorilla glue, super glue,etc. You're right,that stuff doesn't work. 😝

[@hawkesbayboy1]

And still relevant today dec 2021. Thanks!

[@bsoftwareengineer]

Man, you save my time thanks.

[@funkadelicgroove1714]

Great video help me a lot I didn't have to remove any glue off it was hot that the glue stuck to the windshield lol. I just peeled it off cleaned like you did it worked like a charm 👍

[@mememe217]

That’s what I’m going through right now!!! Came out this morning, windshield off, all glue on the glass.

[@ajeza]

Worked exactly like you said it would. Awesome, thanks for the instructions!

[@chrisnotap]

Great to hear!

[@greysfreak1992]

Thanks my husband’s just fell off and tried gorilla glue and didn’t have any luck. Thanks

[@joeyoung1498]

Thank you. I was about to try gorilla glue, lol.