HOW TO SEND MESSAGE/MAKE CALL USING GSM AND ARDUINO || [HINDI]

Hello friends in this video i will show you how to test gsm and send message/call using gsm sim900a.
program link :-
engineerts.wee...
software link:-
www.arduino.cc...
thank you........

[@hrishikeshpurohit8676]

Most detailed tutorial. Solved most of my doubts. Thank you.

[@Abdifitahcabdulahi]

Think you

[@yashmodha7018]

Very helpful tutorial that helped me in sending an SMS automatically when garbage bin is full

[@engineeringAcademypunjab]

Bhai mai college project ke leya yehi garbage bin wala project bna rha hu, toh bta sakte hai aap ki kaise bnaya tha apne plz 🙏

[@ENGINEERTHIS1]

Here is the smart dustbin video :- kzbin.info/www/bejne/qWObpqh3iK2abac

[@swastikarora1109]

No one else defines and write code in the video you are better that others sir

[@generax-zu9jc]

Badhiya kaam kr rhe ho bhai... 🙂🙂 Thank uh bhai.. 💕❤❤

[@akshaydaundkar1533]

Thanku bhai itne detail mai code and gsm module samjhane ke liye great work keep doing

[@ENGINEERTHIS1]

Thank you✌

[@gunaseelan1847]

Such a great tutorial. Great work. Please continue

[@hraday_sadrani]

nice bro mujhe ye video bahut kam ka aya mere gsm project ke liye

[@d.kbarnwal5228]

Thank you sir for uploading this project I liked it very much

[@shimraanm.r.343]

Very Useful... Its working.. Thanks a lot boss

[@PakRepairer24]

Good work 👍💖👏 very nice ❤

[@hasemali7799]

thankyou verymuch…..really appreciated

[@mrunmayivaity6677]

Thank you so much sir, It's really helpful.

[@melvyndsouza820]

IT REALLY WORKED THANKU

[@sddd553]

Sir I am trying to put button on aurduino board and when i press it sms will send to my phone but I am unable to write program sir please help me for this.

[@vidyathakare9928]

thank you it is so helpful

[@aoaap]

Calling code :- #include SoftwareSerial gsm(2,3); void setup() { delay(10000); Serial.begin(9600); gsm.begin(9600); gsm.println("ATDxxxxxxxxxx;"); //replace x by your number delay(100); gsm.println("ATH"); } void loop() { }

[@adityanarayankar4102]

He is useful for idea sim card to or any sim card also

[@OurHighlights]

one video to connect SIM900 GSM module with audrino nano . can you make a simple video for this this one was very informational and educational

[@vishalmalve7594]

It's really a great video sir , with excellent explanation sir but i have a small problem,.. Sir when i uploaded the program in the arduino uno board and in the Serial Monitor when i entered AT then i am not getting OK as the return signal, infact am not getting any messages. But Sir, whn i called to the number which is inside the GSM module, the buzzer of the GSM is ringing ,but it is not making any calls or messages..Please Help me sir..

[@subidadhikari]

did you find the solution?

[@mycleable]

So helpful, Thanks!

[@akshay6667]

The code you used in the video is not working to check whether the gsm is working or not but the code in the link works properly. Why is it so? please tell

[@SONU-zr5lj]

Hi In this project I need a suggestion . Actually the project that I have made is that when some body message on a sim from any number , then the relay becomes active . But I need that when a call / sms from a particular number is received only then my relay becomes high/low. Please suggest me on my problem .

[@subidadhikari]

Did you find the solution?

[@SONU-zr5lj]

@@subidadhikari No

[@Suresh-ll8ko]

Great!! Nd Help if u know how to change name, pass, etc of HC-05 blutooth module with android device

[@swaraj_ballal8612]

What to do if I m going to attach a motor pump and soil moisture sensor ? How would be the connection?

[@Karan-Bansal]

Well explained sir

[@Gabimaru.isLive]

Bhai iske sath sath ham realtime location bhi send krr skte h Kya plzz reply it's very very imp.

[@doityourself2826]

VERY NICE SIR MUJHE ISME IR SENSOR LAGANA HAI JESE HI KOI OBJECT AAYE IR ACTIVATE HO AUR GSM MODULE SE MSG PERITICULAR NUMBER PE CHALA JAYE KI IR KO KISI NE CROSS KIYA HAI PLEASE TELL ME THIS PROGRAMME ON ARDUINO

[@suhaskasute9353]

Sir sim 900a gsm module will work on 12v 1 ampere ?

[@ajinkyayeolekar2082]

When GSM sends and receives data that time it needs high power so would have to give 12v , 2A .

[@skmulaye1]

I like your gsm base arduino video,but for getting massage in mobile is it required to install mobile app ? kindly reply.

[@DNYTechnicals]

Bro late hogaya dekhne me..... But great video

[@ericafernandagalganooo5484]

Perfection is my comment+++===+++

[@bbsamim]

Sir... adriono uno bord me Tx Rx pin available tha.....uha pe connect q nahi kiya...?

[@tomr03status99]

From which number your getting meassage? Plz show full screen

[@anokhautomation4453]

Nice tutorial 🙏🙏

[@mohammadyousef6374]

nice explaination !!! can u please tell me how to send same text to multiple phone numbers using sim900a

[@AnilKumar-zo9eq]

Good morning sir I want to control house application like motor cc tv camera fan bulb itc so how can i do control by sim gsm module Plz sir tell me by a vedio

[@sambhrammathad1330]

Please merge your earthquake detection with GSM module.

[@smtechnomind4949]

Bhot badiya

[@sallu21m]

Hello ... can we make only a soil moisture sensor that can send a sms once the mositure value falls below a particular level and repeat this sms hourly till moisture level is restored to defined level ?? Also if we can ask the system moisture values when enquired by the sms. ..pls let me know ...thank you

[@Educationaltechtips]

good video bhai

[@arduinoproject9234]

Hello sir project is doing the right thing a problem is coming, Like we work on power off of gsm and power on again, network comes in gsm but the signal we send does not work

[@DharamPawar]

dear mohit welldone, can you give some home automation ideas

[@bizimugufrank2502]

Thx for your help

[@JaNaMSoNi]

Nice tutorial

[@dipakpatil3529]

Can I pick up that call? And voice calling by adding voice module?

[@gautamahuja7469]

Awesome video sir. i am getting a little confused in something. please help me out. why we used in gsm.println("AT+CMGS=-----") and what is the difference between gsm.write, gsm.print and gsm.println? thank you

[@elixpo]

write() will return the number of bytes written, though reading that number Gsm.print() will print a given message to the console . println() issues a new line to the printing method

[@jayeshadwani3779]

I want to ask if the network led does'nt blink every 3 sec instead it blinks every second so can you start programming.

[@kailaspachare8991]

Hello Sir I want to ask is it only way to send SMS through serial monitor by typing - send SMS or any other ?

[@MdArshad-kb9xx]

Sir gsm m apne sim insert ki hai Kya?? R the Sim should be 2G only

[@sambhrammathad1330]

Please send the code for earthquake detection by using GSM module and arduino.

[@charanraju3199]

Nicely explained

[@sagarkumar0190]

Fantastic explanation man!!

[@ahmad_ps4793]

Hey, thank you for this explained project. Yet, i am unable to get a response from the GSM module when i sent the AT command. Though i did all the steps as explained.

[@ajinkyayeolekar2082]

Bro use 12V , 2A adopter for power up GSM module it will work.

[@subidadhikari]

@@ajinkyayeolekar2082 Hello there. I am using 5v2a adapter. When I call on the sim inserted in GSM module, the ring is heard but I am not receiving a response from GSM module after entering AT command.

[@ajinkyayeolekar2082]

@@subidadhikari may be here also a same problem 12V 2A , aap market se 12V 2A ka charger try kar sakte hai modul keliye milta hai . Mere bahot sare problem aa rahe the , response nahi mil raha tha , AT commands work nahi kar rahe the , tower nahi pakad Raha tha , after using 12V adopter it solve the all problems

[@subidadhikari]

@@ajinkyayeolekar2082 Dhanyabadh sir..

[@swapnaswapna7661]

Nice video Sir. I have a SIM800A GSM module will the code work with my module ? Thank you

[@ENGINEERTHIS1]

Yes

[@brajeshkumar1358]

एक साथ call, sms प्रोग्रामिंग coding करके mobile स्टार्टर सिंगल फेस and थ्री फेस स्टार्टर कनेक्शन सहित video बनाए sir. Pls send me code.

[@sureshgurjar2262]

Sar ek home automotion video banay jisme call karne par on off ho

[@ENGINEERTHIS1]

Okay i will

[@razeenathaafiya3779]

Does a 12v 1.5a work for this gsm module?

[@sumith_s_prince]

I'm not getting "OK" in the serial monitor,I'm just getting "????¿¿¿" Please help me out how to resolve this.

[@neelrathod594]

Hello sir, security system sim900 pir sensor & arduino Uno call video

[@LuisMora-pd1cb]

Hello. Do you know how can I get the GSM module to GET info from a Webpage?? I am able to do it typing by hand all the AT commands but when I try to do it with a code something is wrong with the syntaxis and nothing happens.

[@villagerstech9968]

Good morning sir Kya ham mobile ko gsm module ki tarah use kar sakte hai

[@prajwalraikar3205]

Hii sir.. How can i connect sim800l gsm module with audio jack.. To talk on earphones

[@jaiminpatel2170]

well done sir tq

[@tayyabgul2099]

Bhai 2g sim dish reciver ko is module se kese connect krain k wo 4g ho jae .. aur cccam wale channel open kre

[@aoaap]

Gsm test code:- #include SoftwareSerial gsm(2,3); void setup() { Serial.begin(9600); gsm.begin(9600); } void loop() { if(gsm.available()) { Serial.write(gsm.read()); } if(Serial.available()) { byte a=Serial.read(); if(a=='#') { gsm.write( 0x1a ); } else { gsm.write(a); } } }

[@rishiyaswanth]

What happens if we lift the call?. Can we record a message and send that message to specificied number?

[@SurendraNarayanRoy]

Where will I get the GSM Module that you have used in your above project? Please share me the link to get it. Waiting for your reply...

[@hamzazahid1522]

Hey bro good video, anyway to program arduino using python?

[@kamit01]

U need Micro puthon, to do that. But Ur Arduino board will not support it cuz of less memory u need at least esp8266 board

[@factvalley7507]

Instead of Uno we can use aurdino nano

[@ENGINEERTHIS1]

Yes you can

[@brajeshkumar1358]

Mobile starter ardiuno programing video publish करिए sir

[@ashishsharma6007]

सर मैं आर्डयूनो बोर्ड की कोडिंग करना सीखना चाहता हूं क्या मेरी मदद करेंगे

[@mittalkalal3708]

I need to stall software serial library or it is pre installed

[@kaushalshrivastava364]

can we receive text message with gsm 900 with arduino when an LED turns OFF at remote location .

[@KhairulIslam-rw2sk]

Command not showing any response. What to do? When I type something and click enter. It just shows nothing.

[@jknews2546]

Bhai plz mayri problem solve kar do mujhe gsm par automatic number ko save karna h ho nhi rahha mujh sy

[@adnanakbani21]

Bro main yeh bato ke agar voice command dekar wirlessly karna honga toh kaise karnge

[@shiveshpanesar3842]

Can u make a video on how to receive call on arduino with the cheapest gsm available

[@akhilkumarkar9112]

sir plz help me .. i want to make a gas leakage detection alert system with gsm sim800l module. plz help me to make this project

[@SapthaPMAC]

Sir, I,'m unable to get call from gsm module to phone,serial monitor showing the result.I'm using sim800A model .Could you please help me

[@sindhushree1000]

Hey i want to add one sensor max30100 in this connection ...can you help me with code

[@muhammadnaveed5056]

i have project in which i have to use C sharp computer language to connect my c sharp program with gsm modem and send messages. can i do it with this modem ? and bro iss mee sim partee hai kia and kuan se partee hai ?

[@robinsonjosephexodus]

Hi sir, i want to get SMS message to My phone for measured distance & angle in object detecting device. so, i need code to control it. Can you share your KNOWLEDGE?

[@popoy7260]

hello sir! why my serial monitor continuing printing "⸮⸮⸮⸮⸮⸮⸮" and failed to send sms and make call . my connection is followed by your procedure . why this is happening sir. can you help me?

[@ENGINEERTHIS1]

Set the serial monitor to 9600 baud rate

[@popoy7260]

@@ENGINEERTHIS1 but it is already 9600 baud rate

[@giselealphonso8546]

Hello sir, I have proceeded in the same manner, but i am not receiving any calls to my number. Could you help me out with anything that I might be doing wrong.

[@gauravdaware1373]

Which anntena used please reply

[@STHShadow]

Is it mandatory to use 2G sim in GSM

[@ajinkyayeolekar2082]

You can use upto 4g sim , except jio.

[@bikashchandradeb9913]

Awesome sir

[@hpsalway6538]

It is showing error when I enter AT + CMGS = "+91 Phonenumber" And it shows no carrier when I tried calling. I have entered everything correctly. What do I do? please help (I am using gsm sim800a)

[@ajinkyayeolekar2082]

Use 12V , 2A adopter

[@eemhisolutions9287]

good Work

[@shubhamverma7730]

hi m using same command that u say but when I type AT nd enter I not get OK by gsm module why ??

[@lailomahmughal8887]

Gsm is not linking with network. Please suggest me what to do??

[@ajitzagade7286]

Sir Call through relay control possibl hai kya

[@Robosir_]

Hi dear friend plz tell me how to make a call from a no. Which already store in sim card

[@nawinlifehacks9978]

Bro...I purchased new GSM module SIM 900A.its working.sim signal is also working fine.your gsm project copying in my system but its not working.what can i do bro?I am also deactivate tx and Rx pins before uploading the code.if any other permissions required for this project...?

[@rishwanthrajaagsj]

Bro what sim card u used bro like 3g sim or 4g sim

[@priyanshishrivastav8658]

Hey programmer hmne y poora program enter kiya lekin last m error aa gya jb hmne search kiya to pta chala error h +CMS error 302 can u plz tell me how to remove this error plz??

[@shraddhasrivastava3328]

Can we use loop with a large delay so that it repeats after a time period?????

[@ENGINEERTHIS1]

Arduino support only maximum of 16 second delay...i recommend you to use rtc module for that.

[@shraddhasrivastava3328]

ENGINEER THIS thanks

[@rajlad4418]

arduino has a max delay of 49 days approx

[@rajlad4418]

@@shraddhasrivastava3328 it has max delay of 49 days approx...

[@kashivlog1434]

Can I use gsm 800c ??

[@abdussaboor4405]

hi my code is working fine and serial monitor shows the value being sent but i cannot receive msg what can be the problem

[@BrainysTreat]

is it also applicable for sim800a? pls reply asap

[@ENGINEERTHIS1]

Yes

[@mehjabinkhan9348]

Hello when i write AT command on serial monitor it's not give OK what i do

[@piashmondal6693]

Me too

[@ashutoshece651]

me too sir..