hope you replaced the flywheel bolts, there stretch bolts use once then replace, if not they can sheer off.
@ianrichardson38884 ай бұрын
Very good. Thank you. One minor observation: The hose between the water filter and impeller housing has a very acute bend at the filter end which might impede smooth flow. This is clear from the image at 16:52.
@vaghripravin90972 ай бұрын
❤❤
@vaghripravin90972 ай бұрын
યે વાલા મશીન કા પ્યાર પટ કિધર
@albertoallotta82292 жыл бұрын
Filmato utilissimo. Grazie per il prezioso contributo
@BetweenSeaandSky2 жыл бұрын
Grazie Alberto
@albertoallotta8229 Жыл бұрын
Questa mattina grazie al tuo contributo sono riuscito a fare ripartire il motore. Grazie sempre
@BigLiz1769 ай бұрын
Beautefull, good, Job 👌
@boembolifarjam34505 ай бұрын
It is best to remove the big heavy gear and make something else for it with a lathe
@rollingrecords9019 Жыл бұрын
How do you get the bolt off the flange for that pump ???
@BetweenSeaandSky Жыл бұрын
Hi, you first have to remove the alternator belt, then turn the flywheel clockwise while you check on the back left side. You’ll see a locking hole on the back of the wheel, insert a bolt into it. Once it’s locked you can use a socket with an Allen key head and a tube as a extension (about a metre is fine) to remove the bolts.
@andreaspaul9138 Жыл бұрын
Спасибо! всё видно и понятно!
@charlesbutt84062 жыл бұрын
Do you perhaps have a GUD or FRAM equivalent number for the fuel filter element Thanks
@BetweenSeaandSky2 жыл бұрын
No I don’t have it sorry, I used the Bukh filter (which comes with a drain on the bottom). I can give you the reference of this one if you want?
@andrewbailey7999 Жыл бұрын
What oil extraction pump do you use? Looks much easire than mine!
@BetweenSeaandSky Жыл бұрын
Hi Andrew, I use this one www.smartmarine.co.nz/product/1385/manual-oil-change-extractor-pump-brass/3574?gclid=Cj0KCQjwsIejBhDOARIsANYqkD1YPPLY91AHBMVBWsDiqUcxgh3uLTvdKThc68UfcK6jxixUrpd615caAkW0EALw_wcB it’s not a professional one and can get a bit messy but it does the job and it’s easy to stow away on a little boat ⛵️
@swanndu22 Жыл бұрын
bonjour! super vidéo! j'aurai aimer savoir où vous trouver vos pièce détaché bukh? je suis en Bretagne et j'envisage d'acquérir un moteur bukh. bien à vous.
@BetweenSeaandSky Жыл бұрын
Bonjour Swann merci pour ton commentaire. Je pends mes pièces ici en Nouvelle-Zélande chez un revendeur à Auckland. Bukh a son usine de fabrication en Pologne où tu peux directement commander sur leur site. Il y’a aussi plusieurs revendeur à travers l’Europe et sûrement en France d’ailleurs. Sinon leur siège sociale et magasin principal et à Southampton en Angleterre. J’espère que ça pourra t’aider ⛵️
@tzak152 жыл бұрын
Hey! Nice video! What type of oil do you use? Thanks!!
@BetweenSeaandSky2 жыл бұрын
Hi, I use some valvoline special small engine SAE 5w30 👍
@tzak152 жыл бұрын
@@BetweenSeaandSky Thanks a lot!
@rollingrecords9019 Жыл бұрын
No one can get the pump off without taking The flywheel off???
@BetweenSeaandSky Жыл бұрын
Yes you can as it’s not located behind the flywheel. However I’m used to remove the flywheel every year during my annually maintenance (as showcased in this video)
@greenpedal3704 күн бұрын
@@BetweenSeaandSky Is that really necessary?
@meinesee90572 жыл бұрын
You have a Code for Color ral Number ?
@BetweenSeaandSky2 жыл бұрын
Hi, I used enamel red paint DE1653 from dupli-color
@alferedfarjam85772 жыл бұрын
I have the same engine, but it gets very hot and when it gets too hot, the water shuts off