How to service engine | Peugeot 308 GTI | 208 GTI 1.6 | Complete guide

kzbin.info...
Tutorial to how to change engine oil and oil filter complete guide..
How to reset service light indicator Peugeot 308,208 GTI 1.6 turbo
1.Turn the ignition OFF.
2.Depress and hold the odometer (mileage reset) button.
3.Switch ON the ignition, do not start the car.
4.Keep the odometer button pressed down for 10 seconds.
5.After 10 seconds the display will read "= O″.
6.Release the odometer button.
7.Switch OFF the ignition and then ON to check if it was reset.How to service peugeot 308 GTI 1.6 turboHow to change engine oil for PeugeotHow to change car engine oilPeugeot 308 GTI engine oil

[@pjohnwilliams6941]

Great vid, can the filter go in the housing any way around? Thanks

[@Robert-gd4kj]

It's nice that the manufacturer recommends 5w30 to pour oil 0w30 ineo for Peugeot 308Gti

[@rajsilverautolearn]

0w30 for snow country is good

[@knighty6988]

Got a 308 GTI 270, when should the coolant fan kick in?? Temp gauge is at 3 quarters (doesn’t go over) fan doesn’t seem to kick in when sat in traffic or when engine is turned off. Engine warms up at a steady normal pace & seems to cool down within normal time. Coolant level is correct, no sign of any leaks. Engine isn’t over heating but at the same time surely the fan should kick in to cool turbo & engine!? Any ideas? Thanks in advance for help/advice. 👍🏻👏🏻

[@varmastiko2908]

There should be a warning light if the fan isn't working when it's supposed to be running.

[@nileeshanandan1658]

What size bolt do they use for undercarriage?

[@mohammedsalamaah4902]

Can you make video how to change coolant water in Peugeot 508 2013

[@rajsilverautolearn]

Sure can🤝

[@yotoutlemonde3953]

Bonjour. L ecope d air a eté modifié a l entreé. 😊

[@GamzMaster]

Any info on torque values for the filter cap and drain plug?

[@RyanCox14]

36NM is the Torque on the drain plug. Filter cap is 25NM, says on top of the filter cap.

[@RyanCox14]

Drain Plug gasket is the collapsible Copper coated rubber washer, solid washer will not seal it but will also deform the drain hole on the sump/oil pan.

[@jordan28803]

Oil grade is 0W30 Isit not.. Maybe its different in Europe

[@rajsilverautolearn]

Yea maybe different grade because of weather

[@jurajkumpan-urbantimberser4128]

0W30, ACEA C1/C2, Specification PSA B71 2312,