How to service HGV Volvo FL250. All oils & filters change in 10 min. Explained with subtitles

[@AevertonOliveira]

Very good explanation, For beginners it would be great to see that

[@chriskennedy7534]

Cars I've been doing for 40yrs New to the big boy's toys

[@chriskennedy7534]

Not my model but very informative TY for posting

[@felixgluhak1267]

Why is the transmission fluid so dark? Changed too late? Expected more of a darker red tone.

[@hgvtechuk4929]

Hi Felix. The transmission fluid is very dark because this truck works over 16 hours a day fully loaded at very low speed, and you believe or not that oil it's just 5 months old ...

[@fongangfrankline4558]

Good work

[@andyg817]

Is it possible to change oil filter housing,, incase of leaks etc.. ?,,

[@hgvtechuk4929]

Yeas, it can be changed. I would make double sure the leak source is not fron some gasket or seal. Clean, leave the engine running till the leak source can be confirmed. Remember, when ordering parts, ask also for any seals and gaskets kits for all the parts to remove.

[@andyg817]

@@hgvtechuk4929 no worries im a hgv tech, work on these engines, have a fleet of dennis rcv euro 6..

[@j.barrett9424]

5:00 What is the purpose of knob beside hand pump on filter housing?

[@hgvtechuk4929]

It pumps the fuel back into fuel filter, once the filter is full need to keep pumping till the air on pipes for the common rail gets out through the fuel return pipe on the tank . After opening any fuel line you must pump the whole air out from the fuel lines otherwise the engine will have a long delay start. because the injectors are not capable to expel the air out from the rail there's also high risk to ruin the fuel pump from running without diesel

[@طارقحسن-ن6ي]

Iveco truck control maintenance model 2012