How to service your Hope Pro 2 Evo rear hub - Hope Technology

[@a1147538]

Hands down the best Rear HUB ever manufactured! The sound is even better!

[@VirtuousCyclesShop]

sound? more like noise; good luck spotting any wildlife on the trail; you'll scare it all away the moment you stop pedaling. You'll get better engagement with a roller or sprag clutch hub. and you'll coast in peace. Hope makes great stuff but enough with the louder = better.

[@jamesgadd5322]

quiet hubs kill. poor deer never heard me coming. sound saves lives.

[@mindedchaos]

a1147538 true true I got a video on my channel of mine

[@justinholmes5614]

Virtuous Cycles It’s handy where I am. Lots of dog walkers on the trail who will walk in front of a quiet bike. The noise gives them a chance to get their dog under control so it doesn’t munch at my heels.

[@Grincannabis]

@@justinholmes5614 🤣

[@trialsted]

It excites me that the freehub design would allow you to switch the spring and pawl round and make the freehub work backwards. If only more of my friends had hope hubs so I could play a trick

[@RobbiePfunder]

lol

[@troyhowling2497]

Great video.... Did mine last night with Blue seal bearings from Trail vision Silkstone.... £17.99 for the set of 5.... Runs mint now... Easy enough to do... Thanks for the video

[@alexismeura135]

thank you !!! i fixe my problem of friction beetween the "cover" of the free wheele and himself

[@CJinsoo]

when he puts the springs in it is critical that the long edge be closer to the inner diameter. if you put the springs in with the long edge closer to the outer side then the hub won’t work properly. you will be able to pedal, but every so often nothing will catch and your crankset will spin around, happens most when you are ratcheting.

[@Gyssefar]

"Just gently" - THONK THONK THONK - "tap the seal out"

[@CJinsoo]

just did my Pro 4 a couple of weeks ago and it was “wham, wham, wham!” with a rubber mallet. next time I going to buy the hub tool or find a similar piece of pvc from home depot. it would be a lot easier with stable supports

[@austinpotts3851]

Could you List the tool and equipment part numbers you use here? thanks!

[@PeowPeowPeowLasers]

If you don't have the bearing support tool, when putting the new bearings on the axle you can probably just use the old bearings as a guide, right? So put the old bearings on top of the new bearing and use the mallet on the old bearings?

[@mr_dfuse]

Good video, managed to service my own hub. Some remarks: * pop the caps off -> took me half an hour. Mole grips eventually made them come off easily, just pull straight away from the hub. * at the end on the non-drive side a seal is put back on with a tapered and a flat side, but the video doesn't mention which side goes up. I tried to follow the seal when he handles it, I think the tapered side goes up. Best to check before you remove it. * the freewheel should pop in with a special tool, for me it never clicked in like in the video, it just fell in place.

[@jasweb147]

I can't get the free hub body out. I'm using vice grips and still no luck. It's brand new, never used. Any suggestions??

[@jasweb147]

Just got it off. Pain in the butt!!

[@mr_dfuse]

@@jasweb147 I'm glad it worked out for you!

[@jgels1935]

Wow, I realy want to experience the performance of that hubs

[@a1147538]

WHAT BRAND IS THAT GREASE GUN???

[@heijoleisten137]

greatest videos ever, thanks a lot.

[@chainreactioncycles]

Glad you liked it!

[@stantheheadhumongous9402]

He said gently tap, and bang

[@johnwatson8192]

Does anyone know if the drift is commercially available or if it was a "home made" one?

[@do-ineedtosay723]

Excellent video! Thank you for posting this.

[@natouvilla]

Completely unrelated, but that a beautiful watch you are wearing. What watch is it? Very helpful video by the way thanks.

[@67preacherman]

Where can i get one of those grease guns? Does it come preloaded or can you refill it and what kind of grease are you using? Great video

[@rejnokarl2514]

So the plat side of the non-drive side seal is facing the hub and the tapered side facing the hub end cap?

[@trialsted]

Also (and arguably more importantly) why doesn't the bearing press tool have a way of locating it? Seems like a missed opportunity.

[@yutian6111]

very useful video , thx

[@capoabe97]

What kind of grease you have tu use ? Very useful and nice video !

[@Greenjuiceman]

this really is a great video - I must admit that I have tried loads of different grease during my 40 years of cycling but the best one has been AeroShell Grease 6 that a helicopter pilot suggested I try - he gave me a small sample and I have to say that it really is fantastic - I would highly recommend it and it is not that much more expensive than a basic lithium grease - one tin would probably last a lifetime and just wait and see and feel the results - please post lots more videos

[@krautergarten4529]

Were the heck u could buy that drift?

[@jamie0wb]

I cant get the left ( brake side ) Adapter from the Axel! Need help please.

[@brandonreimer184]

If the hub has been assembled for a long time things can get stuck. Try soaking with penetrating fluid, if that doesn't help try putting it in the freezer overnight then let it warm back up sometimes that will help free things up. If it is still stuck try freezing everything then while the axle is still cold heat only the spacer it is tricky to heat the spacer while not heating the axle. Try to not use any clamps as it is quite easy to Marr up the axle. Most importantly BE PATIENT! Don't give up and good luck!

[@andreyrozodominguez8050]

Y una q tenga balines se le puede instalar rodamientos al menos en un costado agradezco una opinión

[@sobaniirukara6890]

where appropriate for bicycle polygon xtrada 3.0

[@reginaldmorton2162]

Hope hubs are really f*cking nice hubs. Not cheap like i thought

[@marquezkenken6869]

The spacer between freehub body and hub body is already broken, is ther any spare parts available or you can make a diy?

[@Double_leg_Joe]

What lubricant do you use for the hope pro 2's? I have the 40t if that makes a difference

[@robinmansfeld9563]

Was für Kugellager benötige ich zum Wechsel?

[@StuartNisbett]

what grease gun do you use? looks like the sort of thing I am after.

[@dexter240279]

Grease used in video is Mobil XHP 222,

[@radekst5279]

better is shc 460

[@johnwatson8192]

@@radekst5279 It would be helpful to others if you could explain why you think that this is better?

[@krautergarten4529]

​@@radekst5279why? It has 10% water washout, xhp has 5% ...

[@radekst5279]

@@krautergarten4529 In my opinion. SHC is syntetic, xhp is mineral. Is not easy to wash away SHC 460, even with degreaser. Xhp 222 is more solid, "stickier". SHC 460 is more "loose". In matter of hubs, spindles, i rather use grease that is less "breaking". Each one last more than 6 months period of maintence. In my use, once by year.

[@krautergarten4529]

@@radekst5279 ah check. Thx 🤘

[@ВЕЛОКУЛИБИНЕВГЕНИЙ]

Hammer ? No comment from Россия !

[@Ibedhostelsamui]

ВЕЛОКУЛИБИН ЕВГЕНИЙ วงสาทาาาานยยงงงงงว่า มวยบใใใวววงบวบบวบวววบวววยยวยววมวลบสวยสวมบวนบสยวนยยยยบน. ทาสยชบลลลบบลลบงงบงงบบลบบบงบลลลลลลลบวฝวววงบงงวงบวงงงงงงงบววววววววววบววมสสสวว้้แตีย ท ทายยนจลบบบบบวววววงว งงงงงงงง งงงงงงฝฝฝฝฝฝงงงงงงง งงงงงง

[@mnbavlog4424]

0:55 “gently tap” -kung fus that shit

[@thomashardbattle4287]

Gentle tap *BANG BANG BANG*

[@bakedbass]

how much below the hub shell must the drive side bearing sit ?

[@bakedbass]

obviously measure yours before its too late

[@MartinTeerly]

How much for that set of tools ?

[@123vemund]

Where can i get tools like these? ohh, nice watch :)

[@richardgilbert5339]

For the pro 2 hub, ChainReactionCycles, for the Evo, Ebay

[@dannygitsham1898]

My wheel is wobbly and the wheel is tight, I have hope pro2 hubs any ideas what it could be??

[@james-to8pe]

have u made sure that your qr spring isn't jammed. this happened on my front hub it seems tightly done up but it isn't making your wheel wobbly.

[@khkyu1]

사용하고 싶은 허브 입니다.

[@rhyseardley3112]

What freehub body is it

[@eas3814]

qual valor desse cubo

[@laurinthoene4330]

Anyone who can explain the difference between the pro 2 evo and a pro 2??

[@jamesorton8119]

Does this work for the pro 2 hub as well ?

[@greeenjeeens]

The hub shell of the pro2 and pro2 evo are identical. The axle and freehub are different on the pro2 evo, but the procedure I assume is similar.

[@mantasubartas3094]

Banging 👍

[@Greenjuiceman]

these hubs are so expensive I can't afford them so stick to shimano which works really well

[@Grincannabis]

100€ hope pro 4 135x12

[@SaigonBikeShop]

How to pull out the bearings from freehub and bicycle hubs without using a hammer. All bearings will be hammered even we used rubber hammer. Saigon Bike Shop will tell you how to do! kzbin.info/www/bejne/q6rGfIF-f52LjcU

[@leeeon420]

which grease do hope use for the hubs ?

[@HugoMNF]

Streetbikeboeddi I too need.

[@Greenjuiceman]

this really is a great video - I must admit that I have tried loads of different grease during my 40 years of cycling but the best one has been AeroShell Grease 6 that a helicopter pilot suggested I try - he gave me a small sample and I have to say that it really is fantastic - I would highly recommend it and it is not that much more expensive than a basic lithium grease - one tin would probably last a lifetime and just wait and see and feel the results - please post lots more videos

[@HugoMNF]

Greenjuiceman AeroShell Grease 6 ? Its mineral.

[@harzenduro]

Mobilgrease XHP™ 220

[@АртурБуранов-е3с]

Каким смазки лучшие смазать Hope???

[@omniovideo]

Never ever, ever, ever trust a man with a gold pinky ring

[@neemiascasotto]

Sonho

[@منتضرنوري-ظ6ث]

Ho 😐😐

[@EveKelevra]

И это видео от производителя? Подшипники не выбиваются и не забиваются. Их запресовывают. Любой удар по подшипнику это вероятность создать раковину. А это не хорошо

[@ahitler5592]

fucking BEARING not BARE IN

[@johnwatson8192]

If you want to comment on the pronunciation of bearing don't start the sentence as you did.

[@ahitler5592]

@@johnwatson8192 wow it's been a long time. Thanks