How to Set Amperage for Stick Welding

  Рет қаралды 649,397

TimWelds

TimWelds

Күн бұрын

Пікірлер: 369
@TimWelds
@TimWelds 2 жыл бұрын
You can learn to weld. I'll show you exactly what to do in my affordable online welding courses at courses.timwelds.com.
@larryniidji
@larryniidji 3 жыл бұрын
At 72 I have done many things but always avoided welding. Having recently gotten hold of a small welder, it is time. This was great info!
@ralphfrench2924
@ralphfrench2924 Жыл бұрын
47 and I just started also , never to old to learn something new .👍🏼👍🏼
@gatoborracho4572
@gatoborracho4572 Жыл бұрын
Yes, It's never too late to learn anything
@mapex311
@mapex311 Жыл бұрын
40 here and same. done wood working & building furniture, plumbing, basic house electrical & networking, land& hardscaping, felled bunch of trees, car and lawn equipment maintenance and repairs, etc etc. Always wanted to try welding though. Picked up a small yeswelder. Best of luck to y'all!
@fixedit8689
@fixedit8689 Жыл бұрын
At 59, I’m tired of welding. 38 years as a millwright doing anything from structural, pipe, sanitary pipe and various other welding, I just let the other guys weld while I supervise.
@teamallyracing1780
@teamallyracing1780 11 ай бұрын
​@@fixedit8689time to be a plumber know
@daleworden189
@daleworden189 3 жыл бұрын
I have been going around different KZbin channels for welding tips and realised it’s too hard to learn from to many different people. Not that some are worse/better than others just hard because lots of people have different techniques. I find your style and the way you explain things to be the most straight forward and easiest to understand. Thanks for sharing!!
@dannytse185
@dannytse185 2 жыл бұрын
those who can reach mastery can understand all methods and execute all.
@signman9975
@signman9975 2 жыл бұрын
I am teaching myself to stick weld and most channels tell you to dial it in without really telling you how to dial it in. This is the most informative video I've seen on the subject. Moving the amps incrementally and showing what to look for has helped me immensely and let me start doing better welds.
@tbilal11201
@tbilal11201 4 жыл бұрын
Thank you for including the metric unit.
@marsbase3729
@marsbase3729 3 жыл бұрын
@Oakley John woah! I read this and realized IT'S A SCAM!!! 🙄
@mpirokajosephmgcokoca2355
@mpirokajosephmgcokoca2355 3 жыл бұрын
I thought I was the only one who battles with these inches and quarter inches
@TheIdeasGuy
@TheIdeasGuy 2 жыл бұрын
Down with the imperial measurement system!
@InsaneTreefrog
@InsaneTreefrog 2 жыл бұрын
What's metric? I thought that was only for sockets
@RwP223
@RwP223 2 жыл бұрын
@@mpirokajosephmgcokoca2355 Imperial system for low IQ individual: 1 divided by 2 is 1/2 (one half), One half divided by 2 is 1/4 (one quarter), One quarter divided by 2 is 1/8 (one eighth), One eighth divided by 2 is 1/16 (one sixteenth), do you want me to go on?
@ewfd813
@ewfd813 Жыл бұрын
Hey Tim, I recently began an adult education program at my local Boces and so far much of it has been “go in the booth and figure it out” after briefly being shown how to get the stick welder going, and i just wanted to thank you so much for these videos where you go into detail! They are extremely helpful for people like me who have zero welding experience and I’ve deff seen improvement from them! I’m going to look into your stick welding course to supplement my hands on experience in getting from Boces
@petar807
@petar807 9 ай бұрын
Great video. I've been interested in welding for a long time and did some DIY projects, but I've never seen the process of finding the right current explained this well.
@Natedoc808
@Natedoc808 2 жыл бұрын
Cannot thank you enough for taking the time to make these videos for beginners. Before I found your channel I checked out a couple others and while they made a good effort, their videos were not nearly as well organized, clear, concise, well edited and produced to your standard. It is very much appreciated and the video tutorial community could learn much from what you do. Again, Mahalo!
@ericmaxwell4161
@ericmaxwell4161 Жыл бұрын
This guy is a high quality teacher.
@kukulcangod1
@kukulcangod1 29 күн бұрын
Now, this is one video going above and beyond ,thank you that is shoe great information. Former power generation tech for the US Army here.
@tslim250
@tslim250 Жыл бұрын
You're beginner video's have been invaluable for me with learning how to become better. I've played with arc welding with car batteries in the past just as silly projects but now that i have a serious project looking me in the face i'm working on doing better and from what i learned before and you now i'm advancing along really nicely. I've made a test coupon weld that withstood a good amount of hammer punishment and the weld never broke but the plate sure bent. excellent.
@quickdrawmcgraw4394
@quickdrawmcgraw4394 2 жыл бұрын
I've been tight welding for a couple years. Needed to build some things I can't fit in my shop so I figured I'd pickup the stick. Thanks to you I feel like I've been able to pick it up pretty well after just half a day. Appreciate it good sir.
@W_Rational
@W_Rational 3 жыл бұрын
Thanks a lot Tim. Really helpful. The chart is a great guide for me as a beginner. The sizes in metric help a lot for us Europeans. 👍
@westhurman2819
@westhurman2819 4 жыл бұрын
Thanks Tim. I'm a longtime DIYer. So, when I had a need to weld some items, I figured that I'd just buy a cheap welder, practice with a couple of weld runs, and then take care of my project. Boy was I humbled!!! I now have a great respect for you guys. Love your videos. Maybe, just maybe, if I watch enough of them and keep practicing, maybe I'll learn how to strike an arc at will. Right now it's hit or miss; mostly miss. But I'm determined to learn this art. Again, I love the videos and your clear explanations.
@scottmyhre2450
@scottmyhre2450 4 жыл бұрын
Very helpful to me. I’ve watched so many videos about welding but had not heard the comment about the “heaping of the bead (angle at which the bead meets the plate)”. Found that helpful re amperage. And had not really understood undercut before either. Thanks.
@TimWelds
@TimWelds 4 жыл бұрын
Glad it helped. Thanks!
@patriciofreire3375
@patriciofreire3375 2 жыл бұрын
Clear, concise, and accurate. Thank you for this video. I even saved it so I can re-watch it when necessary.
@pyknight3186
@pyknight3186 2 жыл бұрын
Many years stick welding experience as a teenager, taught by Grand farther. 20 years ago.Used knowledge in many jobs. Recently got one of these baby's, Röhr SMINI-140NI ARC 2 in 1 Welder. 140 Amp. Truly awesome.
@truebluekit
@truebluekit 3 жыл бұрын
Wow... this was incredibly helpful. Thank you! And thank you for including metric measurements!
@TimWelds
@TimWelds 3 жыл бұрын
Glad it was helpful!
@toddcott9510
@toddcott9510 3 жыл бұрын
I have TI G MIG and Oxy. But my 1970s stick welder is still in use and gives value for money results. Thanks for a good video. My best from Scotland
@victoriastreecarellcwv5263
@victoriastreecarellcwv5263 3 жыл бұрын
I just started to play around with welding, and I have to be honest your videos are awesome! Very informative, very educational and I have learned so much in such a short time just from your videos. I have been able to take what I’ve learned from watching you and your demonstration and actually using it in the field. Thank you again!
@beanwellcnsabika2165
@beanwellcnsabika2165 2 жыл бұрын
the explanation is on point thanks
@Babaa51
@Babaa51 2 жыл бұрын
Hello! I am from India. I am 73 years younger person. I often do some engineering works and many of them involve welding. Few years back I bought an used Inverter welding machine on sale. However I am still not sure about the polarity of the work and the holder. Different people give different ideas. I have seen some of your videos. Hence I would be thankful if you can shed some light on this. Thanks again.
@AlexLopez-yv6rr
@AlexLopez-yv6rr 3 жыл бұрын
Thanks a lot never welded in my life learned a lot from your videos bought me a small welder so I could repair my trailer with a crack frame
@yvesf5355
@yvesf5355 3 жыл бұрын
Hey Tim ,love this chart I'm a new stick welder and you make my guessing job a lot easier thanks
@gerardramirez6320
@gerardramirez6320 2 жыл бұрын
Thanks haven't welded in 20 years, retired and ready to git Goin 😀. Subscribed.
@glenstokes2222
@glenstokes2222 2 жыл бұрын
So, off the back of these videos I built a 150 sq m steel roof over my container in the jungle in Costa Rica. Thanks Tim!
@derekharbison1101
@derekharbison1101 8 ай бұрын
That is just gold!
@braxtonjanes5862
@braxtonjanes5862 Жыл бұрын
thanks so much, this is the best said video for stick welding, i’m 15 and just bought a little stick welding machine to fix my broken atv frame. thanks again😁
@davetaylor4741
@davetaylor4741 3 жыл бұрын
Very helpful. I am a mediocre Mig welder and a poor stick welder. Settings and speed are much harder to dial in. Knowing what to look for is a big help.
@Matanumi
@Matanumi 3 жыл бұрын
Mig man.... once you set it up its automatic
@RichardSmith-ms6hh
@RichardSmith-ms6hh 3 ай бұрын
As you and I both know there's way more layers of understanding than this - but you do a great service to welding with this "starting" video.
@novabeast148
@novabeast148 3 жыл бұрын
Hi Tim, my name is Joe and I'm 16, I'm starting a welding coarse for my school next year and we're gonna MIG, TIG, and Stick welding and I was just trying to collect some information so i can be used to the stuff they say and I want to thank you for your videos. You have taught me so much about welding and all the concepts you need to know like arc angles and amps for different sizes of weld plates, so thank you. Have a great day.
@TimWelds
@TimWelds 3 жыл бұрын
Awesome, Joe! I did a lot of welding in high school and clearly never stopped. Thanks for the comment!
@temporalmadness3756
@temporalmadness3756 3 жыл бұрын
Im just starting to weld on a cheap machine and understanding what to look for in order to diagnose what it is that im looking at and what i'm doing is paramount.. all i was finding was people recommending brands or useless gibberish.. your explaining method is perfectly clear and the topic is exactly what a beginner needs.. if i could recomend a topic to be adressed in this manner is "weld pool control and heat management". Thanks and best regards from Argentina.
@shaungarrett3938
@shaungarrett3938 2 жыл бұрын
Really good info. I just bought the same 100 dollar stick welder. These videos are just what I've been needing.
@roygregory8334
@roygregory8334 3 жыл бұрын
At last someone talking sense to beginners. Thanks.
@Nobody-xg2un
@Nobody-xg2un 4 жыл бұрын
Old dynasty DX, I love that machine. I have one, and the arc on that machine with the dig control is unbeatable. I have welded alot of pipe with it in the worst weather you can throw at that machine. I've been inside roofs tying structural steel beams together. I've ran it off my miller Airpak and used the carrying strap to go into places no welder should go. That machine can weld two beer cans together then go out and weld the roof back onto a water tank that's been half blown off. That machine has made me alot of money.
@davidlixenberg5999
@davidlixenberg5999 Жыл бұрын
I loved this piece of writing. David Lixenberg.
@glenstokes2222
@glenstokes2222 3 жыл бұрын
Very helpful. Also explaining what a good weld looks like. Good job.
@stevensunhing2618
@stevensunhing2618 3 жыл бұрын
Hi Tim, how I wish I could have had access to your videos 30 years ago🤣. Back in the day it was really difficult to learn to improve my welding without going to a trade school. Whatever literature I tried to read from was not as informative as your videos. Well done, you have a fantastic way of teaching us to improve in all aspects of welding. My knowledge of welding was all self taught until I began watching KZbin in recent years.🤣. Now I'm learning to correct my mistakes that I could never understand. Thank you.
@marsbase3729
@marsbase3729 3 жыл бұрын
This was great. It really helped me to see the effects of the different amperages and how to make the corrections Thanks!
@santiagocortez9554
@santiagocortez9554 3 жыл бұрын
I've just started welding earlier today and this is hecka helpful
@williamgibb5557
@williamgibb5557 4 жыл бұрын
I have worked with pros that listen and can feel the arc to make the settings proper! Always had great success with them.
@GreyGhost-r4z
@GreyGhost-r4z 2 жыл бұрын
I welded my Tractor Mower deck today and yesterday. My experience level... 1 hour of practice welding with 3/32" 6013 on 16ga sheet metal.. lol. So started to try to weld the mower deck. I tried it at 90amps and it was blowing holes through the sheet metal... backed it off to 70 and the rod was sticking. So set it at 76 and it was working. Still blew some holes throught it, but used some 6013 rod I chipped the flux off of to patch the holes. The second day (today) I turned the heat up a little bit and welded the Mower Deck Bracket back on and fixed my boo boos from yesterday. The mower deck was so thin, I had to build up enough metal to make sure it doesn't break again. It looked terrible, so I chipped off the slag, gave it a good brushing and primed and painted it. Now my mower is fixed all with a $103 Deko 160MMA. Now I need to go find some scrap metal and practice, because when I finished I just wanted to cover it up so nobody would ever see it. lol. Live and Learn. Thanks for the videos !!
@kentonlandworks29
@kentonlandworks29 4 жыл бұрын
Just bought one of those Dekopro stick welders last week - this video is exactly what I needed.
@TulanePass
@TulanePass 4 жыл бұрын
He's the very reason why I got 1!
@kentonlandworks29
@kentonlandworks29 4 жыл бұрын
@@TulanePass Yep, he was a big reason for sure!
@TimWelds
@TimWelds 4 жыл бұрын
Glad it helped. Thanks!
@davidlixenberg5999
@davidlixenberg5999 Жыл бұрын
Dear Tim, I love your programmes and I listen to them a multiple of times, a sign that I am learning from them still. I have two points to make: the metric measures have an important advantage over the Empirial measure and this is their simple graduation: X is greater than Y. In Empirial measure there are two variables: 3/32 is smaller than 1/8 but it isn't immediately obvious that this is so. It is so because 4/32 is the equivalent number to 1/8, and 4/32 is more than 3/32. Much of the discussion is lost on me because I am unable to make the conversions quickly enough. My second comment is in regard to the ammeter set-up. Initially, you used an ammeter to show how currents effect welds. Then you chose to rely on your Miller welder because it's display shows reliable relative values for advancing current sizes. I would have appreciated seeing the series assembly when you used the ammeter. I would have appreciated a table of ammeter values of the Miller at the close of the excellent programme. I loved the spatter-free stick-welds achieved by correct current and speed and arc length. I loved the root weld explained and the undercut weld explained. David Lixenberg, no-nothing, interested in everything.
@MasterBuilderofTruth
@MasterBuilderofTruth Жыл бұрын
Thank you for being so gentle
@aerialrescuesolutions3277
@aerialrescuesolutions3277 4 жыл бұрын
Another great video, I'm so glad I found this channel. Thank you Tim, you have a great teaching style. JimTree
@michaeldunagan8268
@michaeldunagan8268 3 жыл бұрын
Thank you for your generosity of talent and time. So timely it is! I must cut into the subframe if my car to reattach/weld a broken out of place caged nut. I have 10 cu-ft of Acetylene and 20 cu ft Oxygen-but I believe I may rather stick welds to put a plate over the hole I need to cut to tend to this issue. I have not stick-welded since high school metals class and as I recall, I never went above 60 amps that I remember. No shops want to do the work because they do the subframe too much rust. It's still structurally sound. There's no use speaking Lee replacement subframe that is used unless it's from Texas or Arizona cuz I'm going to be dealing with the same rust. The used frame also I have a broken-off caged nut. Toyota asks for $800 for this subframe. Plus I'd have all the labor disconnecting everything that is connected to the subframe and then I'd have to brace the engine up to the top of the body in order to drop the subframe in order to replace it.
@johntuazon6462
@johntuazon6462 2 жыл бұрын
Watching from the Philippines. 😊😊😊
@rickmcdonald1557
@rickmcdonald1557 2 жыл бұрын
I have been a weekend welder for years with an old Craftsman 230 amp AC welder but I was never showed this test you made and it really helped me to become better at sticking things together. I was told by an old professional welder guy that 7014 was called "Idiot Rod" cause anyone could run it and it was good for making the final pass to look good. What do you say? I am a subscriber and enjoy your videos and thanks for your time~!
@michaelmcilrath9466
@michaelmcilrath9466 2 жыл бұрын
Fantastically helpful. Thanks for showing the differences. Great teaching!
@davecasey6104
@davecasey6104 3 жыл бұрын
Awesome video, thanks for including the metric sizes too
@markashlock9017
@markashlock9017 4 жыл бұрын
Really good material. Well explained and hopefully we’ll understood ; ) Thanks, and don’t stop!
@terencebarnett113
@terencebarnett113 4 ай бұрын
I have a welder it has on adjustment,1,2,2-5.3-2 and when welding to use I have set it higher than setting so I went out bought welder with adjustment like yours I set the amps for each welding rod I find it easier to use
@johnmacmillan627
@johnmacmillan627 11 ай бұрын
Thx Tim! Couple of things caught my eye;namely, the weld bead looked the same on the 1/8in plate and the 1/4in plate for the same current. Also, the voltage readout on your machine didnt change a wit when you changed the current. I presume that’s the way the machine works for stick welding by just changing internal resistance.
@manfromthemist1958
@manfromthemist1958 3 жыл бұрын
Thanks Tim, you answered a ot of questions i had about why i was getting poor welds, great vid, please I found you
@SteveSnowman
@SteveSnowman 2 жыл бұрын
Great info on using your amp-clamp to vet the output. My son just inherited a Miller Thunderbolt so this will be the 1st thing we'll do. Thanks. BTW, I just Subscribed.
@anthonygolding725
@anthonygolding725 2 жыл бұрын
Thanks for such informative and simply explained examples.
@GenaEnSamIAm
@GenaEnSamIAm 4 жыл бұрын
Thanks so much dude! You're a freaking rock star!
@saulgudino3584
@saulgudino3584 3 жыл бұрын
I love the explanation. This will help me a lot. Especially as I am learning on my own. Please make a video explaining the arc power settings.
@nooralhashimi6657
@nooralhashimi6657 4 жыл бұрын
Because the welder made in China. I was thinking about Decko welder for a while . And this video helped a lot. Thanks bro for your time making good video.
@TimWelds
@TimWelds 4 жыл бұрын
Thanks! It runs pretty well, but the reading is a bit off.
@nooralhashimi6657
@nooralhashimi6657 4 жыл бұрын
@@TimWelds . Hi, I went for longevity 140amp stick welder. At least made in USA. My next machine is the air plasma cutter 50amp. I am thinking about PrimWeld air plasma cutter. Any idea I appreciate it. Thanks!
@hopefilledsinner3911
@hopefilledsinner3911 2 жыл бұрын
I suspect my cheap stick welder has a cheap amperage selector. Get what you pay for. I've also noticed different power points in the same building can affect the machines too. Your tips for a plonker like me are priceless thankyou.
@ahdam82
@ahdam82 Жыл бұрын
My brother bought me a mini stick welder it’s tiny under 8” long by under 4” wide weighing about 3.7lbs 120A and it welds great! So surprising for $80!
@ronaldkobbo7347
@ronaldkobbo7347 4 жыл бұрын
This was very helpful bro. Keep them coming. Cheers
@ricks6250
@ricks6250 4 жыл бұрын
the different amperages are because it's a switched voltage system, to make it accurate at both voltages would be prohibitively expensive so they just split the difference between the two.
@nanaklif4973
@nanaklif4973 Жыл бұрын
Thank you for the information Am new to stick welding
@rafaeldeleon225
@rafaeldeleon225 2 жыл бұрын
Thanks mate.... that sums up the electrode amps concept.
@Rockinruffhouser
@Rockinruffhouser 2 жыл бұрын
Took a picture of the chart even before you said to lol. Thank you so much. I have so much to learn
@robletto841
@robletto841 3 жыл бұрын
Nice video for us beginners, thank you.
@edwardsiyavong7860
@edwardsiyavong7860 3 жыл бұрын
I'm learning something good today. THANKS MATE!👈🙂
@MikeCraigSLP
@MikeCraigSLP 3 жыл бұрын
Thank you. Teaching my self to stick weld for a hobby and your videos have been very helpful.
@boricuaarecibo9259
@boricuaarecibo9259 2 жыл бұрын
finally someone explained what undercut is
@johnharrison2466
@johnharrison2466 4 жыл бұрын
You have another sub, great laid back technique very detailed and Informative at the same time ,Thanks
@TimWelds
@TimWelds 4 жыл бұрын
Awesome, thank you!
@maryc4463
@maryc4463 2 жыл бұрын
Thank you so much for your videos, I'm only just starting out and am learning so much from you! ☺️
@woodstovehooters4558
@woodstovehooters4558 7 ай бұрын
great experiment and easy to understand and see the effect of the variables
@TimWelds
@TimWelds 6 ай бұрын
Thank you!
@dhirenlande4234
@dhirenlande4234 3 жыл бұрын
Thankyou Tim, you make a great teacher!
@TimWelds
@TimWelds 3 жыл бұрын
Thanks so much!
@raydontopotol3611
@raydontopotol3611 3 жыл бұрын
Found this video by accident.. Now Subscribed..👍👍
@bodereiss
@bodereiss 3 жыл бұрын
This is a good video that helps explain a lot- thank you! What I haven’t seen (or don’t understand) is what adjustments to amps and rod diameter are made for an open root or bad fit joint. More amps? Bigger rod? Smaller rod and less amps? I’m sure it’s a basic answer but all I’ve seen is the whip and pause with cellulose rod. I’d be interested to know all the settings and rod diameter (upsize the rod, downsize the rod etc?) when doing that type of weld.
@tyroneclarke1666
@tyroneclarke1666 3 жыл бұрын
Keep making videos please. Thank you so much. 🦘🇦🇺
@billyeast1203
@billyeast1203 3 жыл бұрын
Love your videos Tim! Just wondering but I am a new welder trying to teach myself and wondered if it's possible to buy welding electrodes in quantities less than 1 pound. Thinking about buying like 5 rods of each type so I can try out more rods at once instead of 1pound bundles and having them go bad over time. Thanks!
@PaodeCasa
@PaodeCasa 4 жыл бұрын
Great video, regards from Brasil.
@B.Cote39
@B.Cote39 3 жыл бұрын
Hey man , thanks for the reviews I love this little stick welder . Had mine for months now, works great!
@mlb6d9
@mlb6d9 2 жыл бұрын
Nicely demonstrated & explained, Thanks!
@davehuxley6689
@davehuxley6689 3 жыл бұрын
Thanks Tim that video was just what I needed, taught me a lot and gave me a better understanding of what to look for.
@TimWelds
@TimWelds 3 жыл бұрын
So glad it helped!
@davehuxley6689
@davehuxley6689 3 жыл бұрын
@@TimWelds Thank you.
@6x-phoenix77
@6x-phoenix77 3 жыл бұрын
This was very helpful. I have been struggling with this.
@rogerwood2864
@rogerwood2864 4 жыл бұрын
Great format on the videos, thank you. I would really like to know more about welding around potentially hazardous areas like the vehicle's frame with the fuel tank still attached. No pressurized vessel welding or anything, more to do with grounding and potential sparking. Any info on this subject would be great. Keep up the videos; they are appreciated.
@TimWelds
@TimWelds 4 жыл бұрын
Thanks! I'll keep that topic in mind for a future video. I used to do a lot of work on vehicles and a lot of people don't think about that.
@jonathangarzon2798
@jonathangarzon2798 3 жыл бұрын
@@TimWelds my stick welder is brand new and the arc will cut off randomly even with a 1/8 arc length. What could cause this?
@Thewatson77
@Thewatson77 4 жыл бұрын
Great video Tim 👍🏼 thanks for sharing.
@TimWelds
@TimWelds 4 жыл бұрын
Thanks!
@oh8wingman
@oh8wingman 8 ай бұрын
There is an old trick that experienced welders use to set your amps and it doesn't involve charts and will take into account the length of your cables which will effect your amps at the stinger. Simply take a 6010 or 6011 electrode one size larger that the 7018 rod you want to use and strike an arc with it at the low end of the scale. Once your arc is sustainable, push on it as hard as you can into a piece of scrap. If it snuffs out, raise your heat a little and try again. Keep doing this until you cannot get it to snuff while pushing it in. You now have your base amps for the next size smaller electrode in 7018. IE: 5/32" 6010 will set you up for 1/8" 7018. If you look at the chart shown here you can see the amps for a 5/32 6010 are exactly the same for a 1/8" 7018 rod. Other sizes are similar in the overlap to one another. And before you ask, yes, I am a First Class Journeyman Welder with over 40 years of experience who had a B Pressure certification in the past before I let it lapse when I retired.
@TimWelds
@TimWelds 8 ай бұрын
Very cool! Thanks for the tip!
@tobywuellner9564
@tobywuellner9564 3 жыл бұрын
Love the videos! I do wonder though, how can we tell whether or not there is good penetration on whatever we are welding? If I welded up a coupon and wanted to see exactly how far it penetrated, how would I do that?
@mcloud375
@mcloud375 3 жыл бұрын
Hi Toby, were you able to find an answer? I have the same question.
@tobywuellner9564
@tobywuellner9564 3 жыл бұрын
@@mcloud375 apparently you cut a cross section of the weld and then acid etch it. Not 100% sure how to do that
@azizaviation
@azizaviation Жыл бұрын
great video and very helpful. all other videos that I watched are excellent. keep up the good work
@DanielinLaTuna
@DanielinLaTuna 3 жыл бұрын
Very interesting content, well presented. New subscriber. As an aside, and recognizing your education, when I was first training in the electric industry, almost all of us said "ampmeter." But our instructors corrected us; while they do measure current flow in Amps, the instruments used are called ammeters. No "P" in the word. Anyway, thank you for sharing your talent and knowledge.
@TulareCountyXIII
@TulareCountyXIII Жыл бұрын
If ur running 60130at a 70 his much do I adjust the thrust lever ?
@replyhere590
@replyhere590 Жыл бұрын
@@TulareCountyXIII With all due respect, if you would write with better grammar and punctuation, so that people can understand your question, you're more likely to get an answer.
@TulareCountyXIII
@TulareCountyXIII Жыл бұрын
Yeah I know my keyboard is fucked up goodlooking out thou
@jimsmith3971
@jimsmith3971 3 жыл бұрын
Ayup Tim. Your videos are great. It's boiling hot here in the UK today so I'm watching your video stark-bollock naked. Keepin it real. Jim.
@EddieVBlueIsland
@EddieVBlueIsland 4 жыл бұрын
Nicely done. Cooling of the plate was excessive since such variation is common - but excellent presentation regardless. Thanks.
@BuildsByBaz
@BuildsByBaz 4 жыл бұрын
That was a great help, thanks mate.
@johnalexander1816
@johnalexander1816 4 жыл бұрын
Thank you so much for this info. Great help for a newbie like me.
@TimWelds
@TimWelds 4 жыл бұрын
Glad it was helpful!
@johndeere5455
@johndeere5455 7 ай бұрын
Thank you for the awesome information. This is tremendously helpful!!!
@shanermac
@shanermac 2 жыл бұрын
Thank you for sharing your knowledge! I really appreciate it. Well-made video!
@CHR.V
@CHR.V 3 жыл бұрын
Thanks Tim ! Just what I needed.
@hstrong97
@hstrong97 4 жыл бұрын
I don't know how I found your channel, but I'm glad I did. Great video. In the future, if you can show different techniques for feeding filler
@hstrong97
@hstrong97 4 жыл бұрын
(continued from above), rod for TIG welding.
@TimWelds
@TimWelds 4 жыл бұрын
Thanks! I'm starting to do a few more TIG videos and I'll keep that topic in mind. I have had half sticks of filler at my desk for years to practice while I'm on the phone or reading email. My coworkers probably think I'm nuts.
@hstrong97
@hstrong97 4 жыл бұрын
@@TimWelds Thanks.. that's a good idea. 👍 I'll practice while watching TV.
@pocatefo1
@pocatefo1 Жыл бұрын
Hola Tim, cómo estás? Quiero hacerte una pregunta: ¿Puede un mal contacto de la pinza de masa (o una pinza de mala calidad) dificultar la potencia de la soldadura? O sea, que llegue menos corriente? No me refiero a una interrupción del arco por falso contacto. Gracias.
@LanNguyen-ll7vs
@LanNguyen-ll7vs 2 жыл бұрын
Hi Tim, Your training how to deal with different amperes for welding is very helpful for beginner. Every time I practice electric welding, the 20 amp home circuit breaker stripped, and I had to reset it. My welding machine generates 70 amp max. Do I need to replace 20 amp circuit breaker with 70 amp one ? We don't have 70 amp circuit breaker in hardware store, do we? Larry.
@TimWelds
@TimWelds 2 жыл бұрын
Hi Larry, The input amperage and output amperage are different. The main function of a welding machine is to take in higher volts and lower amps, then output lower volts and higher amps. On your machine, you'll probably find a table which shows the rated input amps. In most cases, you should be able to run a 70 amp output machine on a 20 amp breaker, but look for that chart or input rating. It's often labeled "I1". It might be worth trying on a different circuit. Either way, I wouldn't replace the circuit breaker with a higher value breaker because the wiring in your house is sized for the original breaker.
@afunvat1597
@afunvat1597 3 жыл бұрын
Very good demonstration.
@apeterson23
@apeterson23 4 жыл бұрын
That was cool keep doing these... they help me lots
@TimWelds
@TimWelds 4 жыл бұрын
Thanks!
@kobusstrydom7013
@kobusstrydom7013 Жыл бұрын
Hi Tim. Great content. I tried to read comments if someone asked but did you weld DCEP or DCEN on these welds. All vids I watch the guys weld 3mm to 5mm plates at G1 but I would like to see 1.6mm mild steel to be welded at the famous 45° to make a 90°. I constantly burn through on 50A and even 40A so I make really short runs at a time. Thanx
@rybread14
@rybread14 Жыл бұрын
Looking for the answer to this as well.
Stick Weld Thin Square Tubing
8:04
TimWelds
Рет қаралды 479 М.
How to stick weld 👨🏻‍🏭: Intro to Arc welding for beginners, (Series Part 1)
30:17
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 79 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 40 МЛН
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 118 МЛН
Stick Welding Basics for Beginners: How to Stick Weld
24:09
TimWelds
Рет қаралды 1,7 МЛН
Stick Welding: How to Read the Puddle
6:06
TimWelds
Рет қаралды 568 М.
How Not To Stick Weld! Avoid These Beginner Mistakes
21:51
Weld.com
Рет қаралды 88 М.
Do this instead (3 Stick Welding Tips)
13:33
Austin Ross (arosswelding)
Рет қаралды 516 М.
Few people know about 1mm welding
8:02
الاسطي ELOSTA
Рет қаралды 2,9 МЛН
Stick Weld Thin Square Tubing (How to Recover After Burning Through)
20:47
Austin Ross (arosswelding)
Рет қаралды 640 М.
(HELP) I Can't See My Mig WELDS (Top 5 Tips)
11:47
AC Designs Garage
Рет қаралды 1 МЛН
Busting FAKE Internet Welds, and Doing Them Better.
11:16
Pacific Arc Tig Welding
Рет қаралды 1,7 МЛН
Help! I Can't See When I'm Welding!
10:08
TimWelds
Рет қаралды 1 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19